Stereoselective Ketone Rearrangements with Hypervalent Iodine Reagents

The first stereoselective version of an iodine(III)‐mediated rearrangement of arylketones in the presence of orthoesters is described. The reaction products, α‐arylated esters, are very useful intermediates in the synthesis of bioactive compounds such as ibuprofen. With chiral lactic acid‐based iodine(III) reagents product selectivities of up to 73 % ee have been achieved.     

A Conductometric Sensor Specific for Cationic Surfactants

In this work, a fast, sensitive and miniaturised conductometric sensor based on interdigitated electrodes, working in differential mode, was developed for the determination of cationic surfactants. The membrane was composed of a polymer (PVC), a plasticizer (dinonylphtalate (DNP)) and a carrier (sodium tetraphenylborate (NaBΦ₄)). The sensor response was linear from at least 10^?9 M to 10^?2 M for dodecyltrimethylammonium (DTA⁺). No significant loss of sensor response was observed after 8 weeks. The sensor exhibited a lower sensitivity and a narrower dynamic range for tetrabutylammonium, decyltrimethylammonium and cetyltrimethylammonium cationic surfactants. A ten times lower sensitivity was observed for laurylsulfate anionic surfactant, (LS^?).     

Iron-Catalyzed Halogen Exchange of Trifluoromethyl Arenes**

The facile production of ArCF₂X and ArCX₃ from ArCF₃ using catalytic iron(III)halides is reported, which constitutes the first iron-catalyzed halogen exchange for non-aromatic C−F bonds. Theoretical calculations suggest direct activation of C−F bonds by iron coordination. ArCX₃ and ArCF₂X products of the reaction are synthetically valuable due to their diversification potential. In particular, chloro- and bromodifluoromethyl arenes (ArCF₂Cl, ArCF₂Br respectively) provide access to a myriad of difluoromethyl arene derivatives (ArCF₂R). To optimize for mono-halogen exchange, a statistical method called Design of Experiments was used. Optimized parameters were successfully applied to electron rich and electron deficient aromatic substrates, and to the late stage diversification of flufenoxuron, a commercial insecticide. These methods are highly practical, being run at convenient temperatures and using inexpensive common reagents.     

Purification of a 166mHo solution by successive high-performance liquid chromatography and gravitational chromatography for half-life determination

A methodology to purify a ^166mHo solution has been developed by a combination of activity and mass concentration measurements in order to further determine the ^166mHo half-life. The isobaric interference at m/q ? 166 requires Ho purification from non-natural Er with a high purification degree due to the large amount of Ho as opposed to Er. The Ho/Er separation was achieved using high-performance liquid chromatography on a semi-preparative column followed by purification on gravitational chromatography. The efficiency of the separation was evaluated after precise determination of the Er isotopic composition. The purification methodology enabled to separate Ho from Er.     

Detailed experimental and kinetic modeling study of 3-carene pyrolysis

3-Carene is an important potential biofuel with properties similar to the jet-propellant JP-10. Its thermal decomposition and combustion behavior is to date unknown, which is essential to assess its quality as a fuel. A combined experimental and kinetic modeling study has been conducted to understand the initial decomposition of 3-carene. The pyrolysis of 3-carene was investigated in a jet-stirred quartz reactor at atmospheric pressure, at temperatures varying from 650 to 1050 K, covering the complete conversion range. The decomposition of 3-carene was observed to start around 800 K, and it is almost complete at 970 K. Online gas chromatography shows that primarily aromatics are generated which suggests that 3-carene is not a good fuel candidate. The potential energy surface for the initial decomposition pathways determined by KinBot shows that a hydrogen elimination reaction dominates, giving primarily cara-2,4-diene. Next to this molecular pathway, radical pathways lead to aromatics via ring opening. The kinetic model was automatically generated with Genesys and consists of 2565 species and 9331 reactions. New quantum chemical calculations at the CBS-QB3 level of theory were needed to calculate rate coefficients and thermodynamic properties relevant for the primary decomposition of 3-carene. Both the conversion of 3-carene and the yields of the primary products (ie, benzene and hydrogen gas) are well predicted with this kinetic model. Rate of production analyses shows that the dominant pathways to convert 3-carene are hydrogen elimination reaction and radical chemistry.     

QUANTIS: Data quality assessment tool by clustering analysis

Automatically generated kinetic networks are ideally validated against a large set of accurate, reproducible, and easy-to-model experimental data. However, although this might seem simple, it proves to be quite challenging. QUANTIS, a publicly available Python package, is specifically developed to evaluate both the precision and accuracy of experimental data and to ensure a uniform, quick processing, and storage strategy that enables automated comparison of developed kinetic models. The precision is investigated with two clustering techniques, PCA and t-SNE, whereas the accuracy is probed with checks for the conservation laws. First, the developed tool processes, evaluates, and stores experimental yield data automatically. All data belonging to a given experiment, both unprocessed and processed, are stored in the form of an HDF5 container. The demonstration of QUANTIS on three different pyrolysis cases showed that it can help in identifying and overcoming instabilities in experimental datasets, reduce mass and molar balance closure discrepancies, and, by evaluating the visualized correlation matrices, increase understanding in the underlying reaction pathways. Inclusion of all experimental data in the HDF5 file makes it possible to automate simulating the experiment with CHEMKIN. Because of the employed InChI string identifiers for molecules, it is possible to automate the comparison experiment/simulation. QUANTIS and the concepts demonstrated therein is a potentially useful tool for data quality assessment, kinetic model validation, and refinement.     

Synthesis of azafluorenones and related compounds using deprotocupration–aroylation followed by intramolecular direct arylation

The efficiency of the deprotocupration–aroylation of 2-chloropyridine using lithiocuprates prepared from CuX (X=Cl, Br) and LiTMP (TMP=2,2,6,6-tetramethylpiperidido, 2 equiv) was investigated. CuCl was identified as a more suitable copper source than CuBr for this purpose. Different diaryl ketones bearing a halogen at the 2 position of one of the aryl groups were synthesized in this way from azines and thiophenes. These were then involved in palladium-catalyzed ring closure: substrates underwent expected CH-activation-type arylation to afford fluorenone-type compounds, and were also subjected to cyclization reactions leading to xanthones, notably in the presence of oxygen-containing substituents or reagents.