二氧化碳对质子化甲醇的溶剂化作用 (cited: 1)

利用团簇模型研究了二氧化碳对质子化甲醇的溶剂化作用．H⁺(CH₃OH)(CO₂)_n⁺(n=1～7)的量子化学计算结果表明,需要3个或4个二氧化碳分子完成甲醇的羟基第一溶剂层．除了氢键,二氧化碳分子间的相互作用对大团簇的稳定性也起到了重要的作用．在这些溶剂化作用的早期阶段,不容易发生质子从甲醇到二氧化碳的转移过程．模拟的红外光谱揭示了自由O-H伸缩振动、氢键作用后的O-H伸缩振动、以及二氧化碳的O-C-O伸缩振动频率是研究质子化甲醇溶剂化过程的灵敏探针．     

硅磁微粒/聚苯胺复合物的制备及其对染料废水的吸附-降解性能

通过水热法制备碳微球、共沉淀法制备空心Zn Fe2O4和原位聚合法制备Zn Fe2O4/Si O2/PANI复合物,并表征其结构、形貌、组成和性质.结果表明,Si O2对铁氧体的包覆能提高二元复合物对染料废水的降解性能;铁氧体与二氧化硅物质的量比(nZn Fe2O4/nSi O2)为1:3的Zn Fe2O4/Si O2复合物对染料废水具有较好的降解作用;Zn Fe2O4/Si O2/PANI复合物对染料废水的光催化降解活性随苯胺质量分数(wAn)的增加而增大,当wAn为50%时,Zn Fe2O4/Si O2/PANI复合物对染料废水去除率高达98%.样品因具有磁性而回收方便,重复使用性能良好.     

A statistical model of microcracking of concrete under uniaxial compression

At increasing external load, numerous microcracks propagate in discrete and successive stages within a body of concrete material according to the hierarchy of their tensile fracture strengths. Each microcrack propagation is conditional upon the statistical encounter of its associated fracture criterion. This paper shows the development of a statistical model for the progressive microcrack growth process within a body of concrete material at monotonic uniaxial loading in compression to ultimate failure. This model is formulated by using the Weibull's statistical theory of the strength of materials. The body of heterogeneous concrete material is simulated as a continuum comprising a large population of microscopic “weakest-link” isoenergy elements, each of which contains a unit-volume of representative micro-structural material which is linearly elastic, homogeneous and isotropic. The statistical modelling is derived from the stochastic evaluation of the tensile micro-fracture probabilities of these isoenergy elements at increasing global uniaxial compressive strains.     

Fast reversible electron transfer for photosynthetic reaction center from wild type Rhodobacter sphaeroides re-constituted in polycation sandwiched monolayer film

Direct reversible electron transfer for photosynthetic reaction center from wild type Rhodobacter sphaeroides re-constituted in polycation sandwiched monolayer film was observed in this work. The redox potential E0' = 0.46 V vs. NHE for first primary donor redox couple P/P+ was accurately measured from reversible CV or SWV peaks, which were quite close to those obtained from optic redox titration method. Reaction center (RC) in film was found re-constituted in such an ordered way that the orientation of RC favored the electron transfer in film. Thus, the protein electroactivity seems to be turned on in this artificial biomimic thin film. Furthermore, RC in the film features a photo-induced redox-peak fluctuation, suggesting an intact and functional state for RC in such film. Redox peaks were also found dependent of pH, implying a proton-coupled electron transfer occurring in film. Charge recombination was observed accompanied with change of electrochemical driving force. Electrochemical model assuming several classes of electroactive sites in the films on the electrode with a dispersion of standard potentials successfully fits SWV experimental data at different pulse height and frequency.     

Structural,electrical and optical properties of SnO2 films deposited on Y-stabilized ZrO2 (1 0 0) substrates by MOCVD

SnO₂ films have been deposited on Y-stabilized ZrO₂ (YSZ) (1 0 0) substrates at different substrate temperatures (500–800 °C) by metalorganic chemical vapor deposition (MOCVD). Structural, electrical and optical properties of the films have been investigated. The films deposited at 500 and 600 °C are epitaxial SnO₂ films with orthorhombic columbite structure, and the HRTEM analysis shows a clear epitaxial relationship of columbite SnO₂(1 0 0)||YSZ(1 0 0). The films deposited at 700 and 800 °C have mixed-phase structures of rutile and columbite SnO₂. The carrier concentration of the films is in the range from 1.15×10¹⁹ to 2.68×10¹⁹ cm⁻³, and the resistivity is from 2.48×10⁻² to 1.16×10⁻² Ω cm. The absolute average transmittance of the films in the visible range exceeds 90%. The band gap of the obtained SnO₂ films is about 3.75–3.87 eV.     

Rapid Determination of Polyphenols in Tobacco by MLC

A rapid, simple and reliable analytical procedure has been developed for the determination of polyphenols, including chlorogenic acid, rutin and scopoletin, in tobacco samples. After extraction, the polyphenols were analyzed by micellar liquid chromatography coupled with UV detection at 340 nm without sample preparation step. The compositions of the micellar mobile phase for the separation of these polyphenols were selected adequately by a chemometric method. The optimal resolution and satisfactory peak shapes were achieved with 0.022 mol L^?1 sodium dodecyl sulfate and 0.45% (volume fraction) 1-propanol solution at pH 5.0 using Eclipse XDB-C18 (250 mm × 3.0 mm, 5 μm) column. The limits of detection for chlorogenic acid, rutin and scopoletin were 0.15, 0.29 and 0.22 μg mL^?1, respectively. This validated method was successfully applied to qualitatively and quantitatively analyze the polyphenols in tobacco in less than 10 min.     

Four divalent metal thiocyanate coordination compounds containing a rigid functional pyridine ligand

A series of new coordination compounds Zn(SCN)₂L₂ (1), Co(SCN)₂L₂ (2), [Cd(SCN)₂L₂·2L]_n (3) and [CdHg(SCN)₄L₂]_n (4) have been prepared by self-assembly of a rigid functional pyridine ligand, trans-4-[4′-(N-methyl-N-hydroxyethyl)amimo]styryl pyridine (abbreviated as L) with M(SCN)_x (M: Zn, Co, Cd, CdHg; x: 2, 4). The crystal structures indicate that 1 and 2 are mononuclear compounds while 3 and 4 are coordination polymers. O–H?N, C–H?O, O–H?π and C–H?π hydrogen bonds play significant roles in the final crystal structures. The solid-state luminescence properties have been measured. The results indicate that the photoluminescence spectra of all the compounds can be changed by the frameworks and introducing of different metal ions.     

Diffusion coefficients of metal acetylacetonates in supercritical carbon dioxide

Binary diffusion coefficients, D₁₂, of the metal acetylacetonates, palladium(II) acetylacetonate and cobalt(III) acetylacetonate, were measured from 308.2 to 343.2 K over the pressure range from 9 to 40 MPa at infinite dilution in supercritical carbon dioxide using the chromatographic impulse response method. The effects of pressure, temperature, density, and viscosity on D₁₂ values were examined. It was observed that the D₁₂ values of palladium(II) acetylacetonate and cobalt(III) acetylacetonate were larger than those of lipids with similar molecular weights, such as arachidonic acid and monoolein, respectively. Furthermore, the measured D₁₂ data of each metal acetylacetonate were well correlated by the hydrodynamic equation D₁₂/T as a function of carbon dioxide viscosity.     

丁二酸二异辛酯磺酸钠(AOT)/TritonX-100混合反胶束体系中纤维素酶降解纤维素的研究

对于底物不溶于水的纤维素降解反应而言,为了增强纤维素酶的活性,在丁二酸二异辛酯磺酸钠(AOT)/异辛烷反胶束体系中加入非离子表面活性剂TritonX-100进行纤维素降解实验.结果表明,在AOT中加入非离子表面活性剂TritonX-100可以使纤维素酶的活性提高,非离子表面活性剂TritonX-100与AOT的最佳物质的量之比是0.20.考察了水与表面活性剂的物质的量之比(Wo)、不同酸度(pH)和不同温度(T)等其他反应条件对纤维素降解反应的影响.研究结果表明,反应的最佳条件是:Wo为3.3,T为315.11K,pH为5.10.