Dendrimer Templated Synthesis of Carbon Nanotube Supported PdAu Catalyst and its Application as Hydrogen Peroxide Sensor

At present, CNT supported catalysts were prepared by two different methods as NaBH₄ reduction and dendrimer templated NaBH₄ reduction method to observe the effect of preparation method on the sensitivity and activity of H₂O₂ reduction. Then, CNT supported Pd_xAu_y bimetallic nanocatalysts having various atomic ratio were synthesized via novel dendrimer templated NaBH₄ reduction method. The resulting materials were characterized employing XRD and TEM. Crystallite size of 10 %Pd_0.7Au_0.3/CNT_dendrimer was obtained from XRD 17.1 nm and mean particle size obtained from TEM is about 15 nm. Moreover, the electrochemical behavior of these catalysts was characterized by cyclic voltammetry (CV) and chronoamperometry (CA) techniques. Pd_xAu_y bimetallic nanocatalysts have excellent electrocatalytic properties and great potential for applications in electrochemical detection. The sensitivity and the limit of detection values for the prepared sensor with monometallic 10 % Pd/CNT_dendrimer catalysts are 219.78 μA mM^?1cm^?2 and 2.6 μM, respectively. However, the sensor constructed with 10 %Pd_0.7Au_0.3/CNT_dendrimer modified electrode has a very high sensitivity of 316.89 μA mM^?1 cm^?2 with a quick response time of 2 s and a wide linear range of 0.001–19.0 mM. In addition, the interference experiment indicated that the 10 % Pd_0.7Au_0.3/CNT_dendrimer nanoparticles have good selectivity toward H₂O₂.     

Diffusion-weighted imaging features of brain in obesity

PURPOSE: Obesity is characterized by an altered distribution of body fluid. However, distribution of fluid (extracellular/intracellular) in brain tissues has not been studied in obese subjects yet. The purpose of this study was to detect possible brain diffusion changes especially in satiety and hunger related centers in obese subjects by diffusion weighted imaging (DWI). METHODS: Conventional MRI and DWI of the brain was obtained from 81 obese patients (obese=68, morbid obese=13) and 29 age-matched, nonobese. The apparent diffusion coefficient (ADC) values were calculated in hypothalamus; amygdala; hippocampal gyrus; thalamus; insula; cingulate gyrus; orbitofrontal, dorsomedial and dorsolateral frontal, middle temporal and occipital cortex; cerebellum; midbrain and corpus striatum. RESULTS: The ADC values of hypothalamus, hippocampal gyrus, amygdala, insula, cerebellum and midbrain were significantly increased in patients (n:81) when compared to nonobese subjects. The ADC values of thalamus, hippocampal gyrus, amygdala, orbitofrontal, occipital, dorsolateral and middle temporal cortex, insula and midbrain were significantly increased in morbid obese when compared to nonobese subjects. The ADC values of orbitofrontal and occipital cortex were significantly higher in morbid obese than the values in the obese. The body mass index positively correlated with ADC values of amygdala, insula, orbitofrontal and middle temporal cortex. CONCLUSION: We observed increased ADC values of distinct locations related to satiety and hunger that suggest altered fluid distribution and/or vasogenic edema in obese subjects. Awareness of this abnormalities in brain tissue composition/function in obesity may contribute to better understanding of the underlying mechanisms.     

Interactions of Imidazolium Based Ionic Liquids with Water Studied by Density and Speed of Sound Measurements: Effect of the Chain Length of an Alkyl Substituent on the Imidazolium Ion

Densities and speeds of sound of three ionic liquids (ILs), 1-ethyl-3-methyl imidazoliumtetrafluoroborate (C₂mimBF₄), 1-butyl-3-methylimidazoliumtetrafluoroborate (C₄mimBF₄) and 1-hexyl-3-methylimidazoliumtetrafluoroborate (C₆mimBF₄) were measured in aqueous solutions at (288.15, 293.15, 298.15, 303.15 and 308.15) K. These data were used to calculate the volumetric properties apparent molar volume and apparent molar isentropic compression as a function of molality. Infinite dilution values for these properties were evaluated by an extrapolation procedure based on Redlich–Meyer type equations. Apparent molar isobaric expansions at infinite dilution were also obtained from the slopes of the apparent molar volume at infinite dilution versus temperature. All these properties are interpreted in terms of IL–water interactions. The hydrolysis of the \( {\text{BF}}_{4}^{ - } \) anion of the ILs and its effects on the results is discussed.     

Structure of methylphenylhydrazone form of 2-(2-methylphenylazo)-1,3-indandione

The molecule crystallizes in a ketohydrazone tautomeric form. The tautomeric form is stabilized by a strong intramolecular hydrogen bond of 2.709(2) Å binding the 3-oxo to the nearest nitrogen atom in the azine chain. The compound crystallizes in the monoclinic space group P2_l/c witha=7.0470(4),b=11.3090(9),c=16.2250(4) Å, =90.310(3)°, V=1293.0(1) ų, Z=4,Dx=1.3576 g cm^–3 and (Cu-K)=7.03 cm^–1. The molecule is nearly planar not regarding the methyl group; the small deviations from planarity are indicative of intramolecular interactions between the phenylazo group and indandione group. Some of the bond lengths and angles found in the molecule are distorted due to resonance, -electron delocalization and strain. The relation between these chemical effects and structural results are discussed.     

Crystallization kinetics of the borax decahydrate

The growth and dissolution rates of borax decahydrate have been measured as a function of supersaturation for various particle sizes at different temperature ranges of 13 and 50 °C in a laboratory-scale fluidized bed crystallizer. The values of mass transfer coefficient, K, reaction rate constant, k_r and reaction rate order, r were determined. The relative importances of diffusion and integration resistance were described by new terms named integration and diffusion concentration fraction. It was found that the overall growth rate of borax decahydrate is mainly controlled by integration (reaction) steps. It was also estimated that the dissolution region of borax decahydrate, apart from other materials, is controlled by diffusion and surface reaction. Increasing the temperature and particle size cause an increase in the values of kinetic parameters (K_g, k_r and K). The activation energies of overall, reaction and mass transfer steps were determined as 18.07, 18.79 and 8.26 kJmol⁻¹, respectively.     

Spectroscopic, thermal and voltammetric studies of crystalline complex trans-N,N'-bis(salicylidene)-1',2'-cyclohexanediamine with Cu(II)

The dimeric complex, [C20H20CuN2O2]2, has been prepared and characterized by thermal analysis, IR spectroscopy and single-crystal X-ray diffraction techniques. The Cu atom in the binuclear complex exists in a distorted square-pyramidal configuration, defined by three O atoms and two N atoms. The crystal structure is stabilized by intermolecular C-H...O hydrogen bonding interaction. The electrochemical property of the complex was investigated in CH2Cl2 by cyclic voltammetry at 100 mV s(-1) scan rate.     

In situ electrochemical solid-phase extraction of anions and cations using polypyrrole and overoxidized sulfonated polypyrrole

A new method for the extraction of both anions and cations is proposed using electro-synthesized polypyrrole (PPy) and overoxidized sulfonated polypyrrole film (OSPPy). In situ anion (chloride, nitrate, sulfate) and cation (calcium, magnesium) uptake and release were examined under controlled potential conditions for prospective applications in electrochemically controlled solid-phase extraction (EC-SPE). The PPy film was used as an anode (anion-exchanger) and OSPPy film was used as a cathode (cation-exchanger) material and reverse order of the electrodes were investigated in EC-SPE. This new cell arrangement containing two ion exchanger polymer electrodes was developed to provide in situ removal of both anions and cations from aqueous solution. Simple preparation of the film coatings on a platinum plate was possible using a constant potential method. Applied positive and negative potentials facilitated the in situ extraction and desorption of ions, respectively. Both anions and cations were desorbed into sample aliquot and were determined by ion chromatography (IC). The method was validated using a standard reference material and tested for the determination of the ions in real water samples.     

Acid modified diatomaceous earth--a sorbent material for thin layer chromatography

Natural diatomaceous earth (DE) is modified by flux calcination and refluxing with acid. To characterize natural DE, modified DE's [flux calcinated (FC)DE and FCDE-I] and silica gel 60GF(254) (Si-60GF(254)) are analyzed microscopically, physically, and chemically by various techniques. FCDE-I and Si-60GF(254) are investigated for their usefulness in the stationary phase of thin layer chromatography (TLC) both individually and in composition. Sodium diethyldithiocarbamate (DEDTC) and ammonium pyrrolidinedithiocarbamate (PyDTC) are prepared as Co or Cu (M) complexes [M(DEDTC)(2) and M(PyDTC)(2), respectively]. These complexes and their mixtures are run on thin layers of Si-60GF(254) and FCDE-I individually, and on various FCDE-I and Si-60GF(254) mixtures. Pure toluene and various toluene-cyclohexane mixtures (3:1, 1:1, 1:2, 1:3, v/v) are used as mobile phases for the running the complexes. The best analytical separations of both M(DEDTC)(2) and M(PyDTC)(2) complexes are obtained when using pure toluene and toluene-cyclohexane (3:1, 1:1, v/v) as mobile phases on FCDE-I-Si-60GF(254) (1:3, 1:1, w/w) layers as stationary phases. This study shows that it is possible to qualitatively analyze and to satisfactorily separate a mixture Cu(2+) and Co(2+) cations on cited chromatographic systems.     

On a Submersion Between Reinhart Lightlike Manifolds and Semi-Riemannian Manifolds

In this paper, we introduce a new submersion, namely, screen lightlike submersion between a lightlike manifold and a semi-Riemannian manifold. We give an example and obtain a characterization for lightlike manifold to be Reinhart under such submersion. Then, we investigate the geometry of a screen lightlike submersion when the total manifold is a Reinhart lightlike manifold. Received: March 6, 2007 Revised: October 4, 2007 and November 2, 2007 Accepted: December 6, 2007