The Processing of Pyrolysis Fuel Oil by Dielectric Barrier Discharge Plasma Torch

In present paper, an atmospheric-pressure low-temperature plasma treatment of pyrolysis fuel oil (PFO) was investigated in dielectric barrier discharge plasma torch reactor. The effect of the applied voltage and the volume of feedstock, as the main parameters, on the cracking of PFO were studied. By increasing the applied voltage from 10 to 16 kV, the production rate of hydrocarbons containing methane, ethylene, acetylene, propane, propylene, and C₄ rise 18 times. In this case, the production rate of hydrogen increases by approximately 14 times and reaches 7.27 × 10^?3 mol/min for 16 kV. In the feedstock volume investigation, based on limitation of reactor volume, the production rate of hydrocarbons decreased from 0.44 × 10^?3 to 0.15 × 10^?3 mol/min by increasing volume of feedstock from 1 to 5 cc.     

Polyelectrolyte Nanocomposite Membranes Using Imidazole-Functionalized Nanosilica for Fuel Cell Applications

The preparation and characterization of a new type of nanocomposite polyelectrolyte membrane, based on DuPont Nafion/imidazole-modified nanosilica (Im-Si), for direct methanol fuel cell applications is described. Related to the interactions between the protonated imidazole groups, grafted on the surface of nanosilica, and negatively charged sulfonic acid groups of Nafion, new electrostatic interactions can be formed in the interface of Nafion and Im-Si which result in both lower methanol permeability and also higher proton conductivity. Physical characteristics of these manufactured nanocomposite membranes were investigated by scanning electron microscopy, thermogravimetry analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, water uptake, methanol permeability, and ion-exchange capacity, as well as proton conductivity. The Nafion/Im-Si membranes showed higher proton conductivity, lower methanol permeability and, as a consequence, higher selectivity parameter in comparison to the neat Nafion or Nafion/silica membranes. The obtained results indicated that the Nafion/Im-Si membranes could be utilized as promising polyelectrolyte membranes for direct methanol fuel cell applications.     

Oxidation of 1,4-Dihydropyridines under Mild and Heterogeneous Conditions

A combination of NaHSO₄.H₂O and NaNO₂ in the presence of wet SiO₂ was used as an effective oxidizing agent for the oxidation of dihydropyridines to their corresponding pyridine derivatives at room temperature with excellent yields.     

Very sensitive differential pulse adsorptive stripping voltammetric determination of 4-nitrophenol at poly (diphenylamine)/multi-walled carbon nanotube-β-cyclodextrin-modified glassy carbon electrode

In this work, a glassy carbon electrode (GCE) modified with poly (diphenylamine)/multi-walled carbon nanotubes-β-cyclodextrin (PDPA/MWCNT-β-CD) film was constructed and used for the determination of 4-nitrophenol (4-NP). Diphenylamine was successfully electropolymerised onto MWCNT-β-CD-modified GCE by cyclic voltammetry in monomer solution and 5 mol L^?1 H₂SO₄. The surface morphology of PDPA/MWCNT-β-CD film was characterised using scanning electron microscopy and electrochemical impedance spectroscopy. After adsorption of 4-NP on PDPA/MWCNT-β-CD at 0.2 V for 150 s, it showed a well-defined reduction peak in phosphate buffer solution at pH = 7. The PDPA/MWCNT-β-CD film enhanced the reduction peak current due to the complex formation between β-CD and 4-NP, presence of conductive polymer film as electron transfer mediator and also ability of MWCNTs for strong adsorptive and catalytic effect. Peak current increased linearly with 4-NP concentration in the range of 0.1 to 13.9 µg L^?1. The detection limit was obtained as 0.02 µg L^?1, which is better than other reported detection limits for the determination of 4-NP. The results showed that modified electrode has good sensitivity and selectivity. This sensor was used for the determination of 4-NP in water samples.     

Substituted quinolinones. 18. 3-Acetyl-4-methylthioquinolin-2(1H)-one as useful synthon intermediate for synthesis of some new quinolinones

3-Acetyl-4-methylthioquinolin-2(1H)-one (3) has been prepared and its reactivity towards treatment with different reagents, dilute sulfuric acid, aqueous sodium hydroxide, and hydrogen peroxide, is described. The reactions of compound 3 with benzylamine, benzaldehyde, DMF-DMA, Vilsmeier-Haack reagent, 2-chloro-3-formyl-pyridopyrimidone and malononitrile have been carried out under convenient conditions. Compound 3 underwent heterocyclization reactions with some binucleophiles, hydrazine, hydroxylamine, urea, thiourea, semicarbazide, and thiosemicarbazide, furnishing some known five, six, and seven heterocyclic annellated quinolines. All the new compounds have been characterized using different spectral and analytical tools.     

Enhancement of β-Glucan Biological Activity Using a Modified Acid-Base Extraction Method from Saccharomyces cerevisiae

Beta glucan (β-glucan) has promising bioactive properties. Consequently, the use of β-glucan as a food additive is favored with the dual-purpose potential of increasing the fiber content of food products and enhancing their health properties. Our aim was to evaluate the biological activity of β-glucan (antimicrobial, antitoxic, immunostimulatory, and anticancer) extracted from Saccharomyces cerevisiae using a modified acid-base extraction method. The results demonstrated that a modified acid-base extraction method gives a higher biological efficacy of β-glucan than in the water extraction method. Using 0.5 mg dry weight of acid-base extracted β-glucan (AB extracted) not only succeeded in removing 100% of aflatoxins, but also had a promising antimicrobial activity against multidrug-resistant bacteria, fungi, and yeast, with minimum inhibitory concentrations (MIC) of 0.39 and 0.19 mg/mL in the case of resistant Staphylococcus aureus (MRSA) and Pseudomonas aeruginosa, respectively. In addition, AB extract exhibited a positive immunomodulatory effect, mediated through the high induction of TNFα, IL-6, IFN-γ, and IL-2. Moreover, AB extract showed a greater anticancer effect against A549, MDA-MB-232, and HepG-2 cells compared to WI-38 cells, at high concentrations. By studying the cell death mechanism using flow-cytometry, AB extract was shown to induce apoptotic cell death at higher concentrations, as in the case of MDA-MB-231 and HePG-2 cells. In conclusion, the use of a modified AB for β-glucan from Saccharomyces cerevisiae exerted a promising antimicrobial, immunomodulatory efficacy, and anti-cancer potential. Future research should focus on evaluating β-glucan in various biological systems and elucidating the underlying mechanism of action.     

Synthesis and cytotoxic evaluation of novel brominated N-alkyl pyrano[3,2-c]quinolinones

A novel series of 6-alkyl-4-bromopyrano[3,2-c]quinoline-2,5-diones ( 2a–c ), 6-alkyl-3,4-dibromopyrano[3,2-c]quinoline-2,5-diones ( 4a–c ), and 6-alkyl-3-amino-bromopyrano[3,2-c]quinoline-2,5-diones ( 6a–c ) were synthesized via appropriate conventional methods and in good yields. The structures of target compounds were approved by elemental analysis, IR, ¹H NMR, ¹³C NMR, and mass spectrometry. The antitumor inhibitory activities of the new compounds were evaluated on several cancer cell lines, A-549 (human lung cancer), HCT-116 (human colon cancer), MCF-7 (breast cancer), and HePG-2 (human liver cancer). Moreover, 50% inhibitory concentrations, IC₅₀, were established. 5-Fluorouracil was used as a positive control in the viability assay. The screening results showed that most of the examined compounds exposed powerful inhibition activity toward various cell lines. Particularly, Compound 4c exhibited higher cytotoxic activity against four tumor cell lines than the reference drug, 5-fluorouracil, with significantly lower IC₅₀ values. Accordingly, most of the synthesized compounds would be a better prospective growth in the anticancer drug discovery.     

Alizarin-modified sulfonate carbon nanoparticles in vanadium sensing

The adsorption processes of alizarin onto hydrophilic carbon nanoparticles (Emperor 2000?) are investigated. The significant increase in voltammetric responses for pre-adsorbed alizarin compared with those for solution confirms high affinity of alizarin to carbon nanoparticles (possibly due to π–π stacking interaction between aromatic rings of alizarin and surface-sulfonated carbon nanoparticles). To obtain the optimum of adsorption conditions, the effects of pH, agitation rate, and adsorption time are investigated. Under square wave voltammetry conditions, the peak current for the reduction of alizarin shows a linear relationship with concentration in the range from 2.0 to 10.0 nM. The limit of detection is estimated 5.8?×?10^?9 mol L^?1. Next, alizarin is applied as a receptor for sensing of trace vanadium in acetate buffer pH 5. Linear calibration curves are obtained for vanadium in the range of 1.0?×?10^?6 to 1.0?×?10^?4 mol L^?1 and the limit of detection is estimated 9.6?×?10^?8 mol L^?1. Determination of vanadium in real samples such as sea and tap water is demonstrated.