四核钴羰基簇合物Co4(CO)8(μ-CO)2(μ4-PSR)2的合成和晶体结构

The title compounds Co4(CO)8(μ-CO)2 (μ4-PSR) [R=-CH3, -C2H5, -C(CH3)3,-(CHa)4CH3] were synthesized by the reaction of Co2(CO)8 with RSPCl2. They were characterized by IR, 1HNMR, elemental analysis. The crystal and molecular structure of Co4(Co)8(μ-CO)2 (μ4-PSC2H5) has been determined by single crystal diffraction method. Crystal data: monoclinic, space group P21 /c, with a=8-445(3), 6=8.562(3), c= 17.125(6)Å, β=104.26 (3)' 9 V=1200.1Å3, Z=2, Dc=1.937gcm-3. Its molecular structure contains an octahedral Co4P2 skeleton which consists of a rectangular four cobalt atoms core and the Co4 core is capped above and below by two quadruply bridging PSR ligands.     

Kinetic Spectrophotometric Determination of Ritodrine Hydrochloride in Dosage Forms

A simple and sensitive kinetic method was developed for the determination of ritodrine hydrochloride in pharmaceutical preparations. The method is based upon a kinetic investigation of the oxidation reaction of the drug with alkaline potassium permenganate at room temperature for a fixed 12.5 min; the absorbance of the colored permenganate ion was measured at 609 nm. The absorbance concentration plots were rectilinear over the range of 1.6–11.2 μg mL^?1 (r = 0.9992) with a minimum detectability of 0.096 μgmL^?1 (2.88 × 10^?7 M). The different experimental parameters affecting the development and stability of color were carefully studied and optimized. The determination of ritodrine hydrochloride by the fixed concentration and rate constant methods is also feasible with the calibration equations obtained, but the fixed time method has been found to be more applicable. The proposed method was applied successfully to the determination of ritodrine hydrochloride in tablets and ampoules with average recoveries of 100.37 ± 0.93% and 100.42 ± 0.87%, respectively. The results obtained were in good agreement with those obtained using a reference method for comparison. A proposal of the reaction pathway is also presented.     

Dampfdruck- und Leitfähigkeitsuntersuchungen der Ionensolvatation in Amiden

The solvating properties of formamide, N-methylformamide, dimethylformamide, N-ethylformamide and diethylformamide have been investigated by means of vapour pressure and conductivity measurements. For the salts and ions, resp. average solvation numbers have been calculated from vapour pressure data and limiting ionic conductances. The solvation numbers are used for a discussion of the influence of N-substituents on the solvating properties of the amides.

---

---

Mit 2 Abbildungen     

The influence of cross-linking agents on ring-opening metathesis polymerized thermosets

The addition of suitable cross-linking agents with norbornene-based monomers has significant effects on the thermal properties of the resulting polymers formed by olefin metathesis. Ethylidene norbornene (ENB) and endo-dicyclopentadiene (endo-DCPD) were mixed separately with various loadings of three different cross-linking agents and then polymerized with the addition of Grubbs’ catalyst. The polymerization kinetics and resulting glass transition temperature (T _g) of the systems were evaluated by differential scanning calorimetry (DSC). The addition of the first cross-linking agent, norbornadiene (CL-1), to both endo-DCPD and ENB resulted in decreasing glass transition temperatures with increasing concentrations. In contrast, the addition of the other two cross-linking agents (CL-2 and CL-3), which were both custom synthesized bifunctional norbornyl systems, to both endo-DCPD and ENB resulted in a monotonic increases in T _g with cross-linker concentration. By tailoring the loading of these custom cross-linking agents, the properties of these polymer systems can be controlled for various applications, including self-healing composites.     

Poly[μ‐aqua‐μ4‐naphthalene‐1,8‐dicarboxylato‐zinc(II)]

In the title complex, [Zn(C₁₂H₆O₄)(H₂O)]_n, a Zn^II polymer based on naphthalene‐1,8‐dicarboxylate (1,8‐nap), the Zn^II atoms adopt an elongated octahedral coordination geometry. A zigzag chain is formed by μ₂‐aqua ligands and μ₂‐carboxylate groups of the 1,8‐nap ligands. Adjacent parallel chains are further linked by 1,8‐nap ligands, forming a twisted two‐dimensional layer structure along the (100) plane.     

动物尿液中盐酸克伦特罗的分子印迹固相萃取-气相色谱-质谱法研究

采用分子印迹聚合物(MIP)固相萃取小柱提取、净化并富集猪尿液中的盐酸克伦特罗分子,用N,O-双三甲基硅基三氟乙酰胺(BSTFA)衍生化,毛细管气相色谱-质谱联用(选择离子模式,选择离子为277、262、243和86)对衍生物分析。优化了MIP固相萃取柱的淋洗条件,考察了MIP固相萃取柱的净化效果和消除基体干扰能力,建立了对动物尿液中盐酸克伦特罗的定性、定量分析的方法。在优化条件下,本法检出限(LOD)为0.51μg/L,定量限(LOQ)为1.00μg/L;不同盐酸克伦特罗加入量的回收率为71.0%~89.3%;相对标准偏差为3.2%~9.7%。将该方法与农业行业标准方法比较,结果吻合较好。但该方法灵敏度和精密度高,操作更为简单、快捷。     

Antifouling ultrafiltration membrane composed of polyethersulfone and sulfobetaine copolymer

A new random copolymer was synthesized by reacting hydrophilic N,N-dimethyl-N-methacryloxyethyl-N-(3-sulfopropyl) (DMMSA) with hydrophobic butyl methacrylate (BMA) through a conventional radical polymerization. The as-prepared sulfobetaine copolymer (DMMSA–BMA) was blended with polyethersulfone (PES) to fabricate antifouling ultrafiltration membrane for BSA separation. The X-ray photoelectron spectroscopy analysis of blend membranes revealed concentration of sulfobetaine groups at the membrane surfaces that endowed the membrane with higher hydrophilicity and better antifouling property. For the membrane with 8.0 wt% DMMSA–BMA copolymer concentration (No. 5), irreversible fouling has been considerably reduced and the flux recovery rate of the blend membrane reached as high as 82.8%. Furthermore, the blend membrane could effectively resist BSA fouling in a wide pH range from 4.0 to 8.0.     

A study of substituent effect on 1H and 13C nmr spectra of N‐ and C‐substituted carbazoles

¹H and ¹³C nmr spectra of several N‐ and C‐substituted carbazoles (Series 1, 2, 3 and 4) were measured. Correlations between chemical shifts and substituent constants show that these parameters describe properly the substituent effect on the nmr phenomena. Atomic charge densities for carbazoles of Series 1, 2, 3 and 4 were calculated by using the semi empirical PM3 method. These values also show a linear correlation with the ¹³C chemical shifts. The synthesis of several carbazole derivatives 1a – 1g, 2a – 2g, 3a – 3j and 4a – 4g have been carried out according to literature procedures. The carbazoles 3i, 3j and 4c have been synthesized and fully characterized for the first time.     

分子筛体系的氢溢出效应

分子筛体系的氢溢出效应李晓燕，盛太成，杨孔章（山东大学化学院，济南２５０１００）关键词铂／分子筛催化剂，氢溢出，程序升温脱附负载型金属催化剂的表面氢溢出效应近年来引起了人们的重视．人们采用不同的实验方法对此进行了广泛的研究，但对以分子筛为担体的负载型...