Nondissociative chemisorption of short chain alkanethiols on Au(111)

The adsorption of methanethiol and n-propanethiol on the Au(111) surface has been studied by temperature-programmed desorption (TPD), Auger electron spectroscopy (AES), and low-temperature scanning tunneling microscopy (LT-STM). Methanethiol desorbs molecularly from the chemisorbed monolayer at temperatures below 220 K in three overlapping desorption processes. No evidence for S-H or C-S bond cleavage has been found on the basis of three types of observations: (1) A mixture of chemisorbed CH3SD and CD3SH does not yield CD3SD, (2) no sulfur remains after desorption, and (3) no residual surface species remain when the adsorbed layer is heated to 300 K as measured by STM. On the other hand, when defects are introduced on the surface by ion bombardment, the desorption temperature of CH3SH is extended to 300 K and a small amount of dimethyl disulfide is observed to desorb at 410 K, indicating that S-H bond scission occurs on defect sites on Au(111) followed by dimerization of CH3S(a) species. Propanethiol also adsorbs nondissociatively on the Au(111) surface and desorbs from the surface below 250 K.     

Über das Verhalten der Opiansäure und ihrer Ester gegen einige Aldehydreactionen

Zusammenfassung Zu den früher von mir angeführten Gründen, welche für die aufgestellten Formeln der isomeren Opiansäureester sprechen, sind noch in erster Linie das Verhalten gegen Phenylhydrazin, sowie nach Versuchen Liebermann's das Verhalten gegen -Naphtylamin und Semicarbazid, in zweiter Linie das Verhalten gegen fuchsinschwefelige Säure, Diazobenzol-p-Sulfosäure und vielleicht auch das Verhalten gegen Essigsäureanhydrid und Natriumacetat hinzuzufügen. Da somit die Constitution der Opiansäureester genügend feststeht, ist eine Überprüfung der Beobachtungen Stabil's über die Ester der Phtalaldehydsäure wünschenswerth.Die Aldehydreactionen mit Resorcin und mit Nitroprussidnatrium versagen bei der Opiansäure und ihren Estern; auch die anderen oben erwähnten Farbenreactionen sind hier von geringem Werth.     

Catalyst Design for Methacrolein Oxidation to Methacrylic Acid

Heteropoly compounds (HPCs) with the general formula CsMHPVMo₁₁O₄₀are prepared and tested as catalysts. The influence of elements entering the formula on the catalyst properties is studied: Cs defines the acidity and specific area, V controls the selectivity, and the transition metal M defines the mobility of oxygen in the bulk and the catalyst activity. The mechanism of methacrolein oxidation over HPCs is investigated. Using the response method and mass spectrometry of the reaction mixture, it is shown that only the catalyst oxygen atoms take part in the formation of methacrylic acid and that the transport of active oxygen to adsorbed methacrolein plays a key role in the oxidation process. A correlation between the HPC activity and the redox ability of the metal cation M ⁿ⁺ M ^{n+ i} (i= 1 or 2) is found. New catalysts for methacrolein oxidation to methacrylic acid are developed on the basis of this correlation. These are the salts of PVMo-poly acid with Cs, Cu, and the transition metal M as cations. These catalysts are more active (a conversion of up to 91%) and selective (up to 98%) compared to conventional catalysts for methacrolein oxidation to methacrylic acid.     

Tetraazadibora[3, 3]paracyclophane

Starting from the para‐phenylenediamine derivative HN(SiMe₃)‐C₆H₄‐NH(SiMe₃), a lithiation and subsequent borylation give [(MeO)₂B]N(SiMe₃)‐C₆H₄‐N(SiMe₃)[B(OMe)₂] ( 1 ), the hydridation of which yields Li₂[(H₃B)N(SiMe₃)‐C₆H₄‐N(SiMe₃)(BH₃)] ( 2 ). Applying ZrCl₄ upon 2 initiates a condensation to give the title compound [‐N(SiMe₃)‐p‐C₆H₄‐N(SiMe₃)‐BH‐]₂, a hetero[3, 3]paracyclophane with two N‐B‐N chains that connect the para‐phenylene units. The product 3 crystallizes in the orthorhombic space group P2₁2₁2₁.     

Ligand exchange reactions with η6-arene-η5-cyclopentadienyliron cations under thermal or photochemical conditions

Reactions of various η⁶-arene-η⁵-cyclopentadienyliron or substituted cyclopentadienyliron cations with trimethyl, triethyl or triphenyl phosphite under either thermal or photochemical conditions all resulted in the replacement of the arene ligand with three phosphite ligands to give η⁵-tris(trimethyl, triethyl or triphenyl phosphite)-η⁵-cyclopentadienyliron or substituted cyclopentadienyliron cations. The yields of the phosphite complexes were higher from photolysis than from the analogous thermolysis. Photolysis of the η⁶-chlorobenzene-η⁵-cyclopentadienyliron cation (IX) carried out in the presence of a more basic or more electron-rich aromatic ligand resulted in the exchange of the chlorobenzene of IX with the more basic arene, thus providing synthetic routes to cyclopentadienyliron complexes that may be difficult to prepare by other means. New complexes synthesized in this way are the η⁶-2-phenylethyl tosylate-η⁵-cyclopentadienyliron cation and the CpFe⁺ complexes of thiophene, 2-methylthiophene, 3-methylthiophene and 2,5-dimethylthiophene.     

Spectrophotometric Determination of Zirconium in Monazite Sand

A sensitive spectrophotometric method was developed for the determination of zirconium in monazite sand. The zirconium ion was previously separated from the other interfering elements by a 0.5 M thenoyltrifluoroacetone (TTA)-xylene extraction, then determined with Arsenazo III in 9 M HCl medium. Zirconium reacted with Arsenazo III to form an emeraled green coloured complex having maximum absorbance at 665 nm in 9 M HCl medium. The color was stable for at least 2 hours. Effects of time, HCl concentration, gelatine and various ions have been studied. The system confirms the Beer's law over the concentration range investigated. Optimum condition range for measurement in 1.0 cm quartz cell is 0.1–0.5 μg/ml of zirconium. The molar absorptivity is 1.51×10⁵ liter mole^?1 cm^?1. The metal-ligand ratio of 1:4 was confirmed by Job's Continuous Variation method and the conditional stability constant of Zirconium-Arsenazo III Complex in 4 M HCl and 9 M HCl were also determined by this method.     

聚乙撑二氧噻吩膜在氧化态的充电过程及电容研究

In this paper, the chronoamperometry was used to study the charging processes of polyethylenedioxythiophene (PEDOT) modified electrodes in the potential range where PEDOT was in the oxidized state. The results show that the charging behaviors of the PEDOT films are well agreed with the exhausted finite diffusion model. The dependence of the capacitance values of the films on potential and concentration of solution was also studied in this potential range.     

Metastasis-suppressor KAI1/CD82 induces homotypic aggregation of human prostate cancer cells through Src-dependent pathway

To investigate the functional role of KAI1/CD82, a metastasis suppressor for human prostate cancer, in the regulation of homotypic cell adhesion, we transfected KAI1 cDNA into DU 145 human prostate cancer cells and established stable transfectant clones with high KAI1/CD82 expression. The KAI1 transfectant cells exhibited significantly increased homotypic cell aggregation in comparison with the control transfectant cells. This aggregation of the KAI1 transfectants was further enhanced upon exposure to anti-CD82 antibody, suggesting that KAI1/CD82 may be involved in the intracellular signaling for the cell adhesion. Among several signal pathway inhibitors tested, PP1, an inhibitor of Src family kinases, significantly suppressed homotypic aggregation of the KAI1 transfectant cells. Ligation of KAI1/CD82 with anti-CD82 antibody increased endogenous Src kinase activity of the KAI1 transfectant cells. When different types of src expression constructs were retransfected into the KAI1-transfected DU 145 cells, kinase-negative mutant src transfectant cells exhibited much lower homotypic aggregation than the mock cells transfected with an empty vector. Moreover, homotypic aggregation of the mutant src transfectant cells was not enhanced by KAI1/CD82 ligation with anti- CD82 antibody. These results suggest that Src mediates the intracellular signaling pathway of KAI1/CD82 for the induction of homotypic adhesion of human prostate cancer cells.     

Improved expression by cytomegalovirus promoter/enhancer and behavior of vascular endothelial growth factor gene after myocardial injection of naked DNA

Direct injection of the vascular endothelial growth factor (VEGF) gene plasmid DNA into the myocardium was shown to induce development of new blood vessels to increase the circulation in the heart of patients with coronary artery diseases. However, such angiogenic gene therapy (via naked DNA) was limited by low level of gene expression. Furthermore, the temporal and spatial characteristics of VEGF gene transfer in the heart are not known. In this study, we demonstrated that a plasmid vector, containing the human cytomegalovirus immediate early (HCMV IE) promoter and enhancer, induces greater expression of gene in the rat heart monitored by gene fused to the chloramphenicol acetyl transferase (CAT) reporter, than four different viral and cellular promoters. Interestingly, expression of VEGF121 protein showed an earlier peak, a shorter duration, and a wider distribution than that of CAT only. Therefore, a plasmid vector with an HCMV IE promoter/enhancer provides clear advantages over other previously developed plasmids. Furthermore, expression profile of VEGF121 gene may provide useful information in the design of angiogenic gene therapy in the heart.     

Optical measurement of the deformation of giant lipid vesicles driven by a micropipet electrode

We investigate the deformation of giant lipid vesicles driven by a micropipet electrode by use of differential confocal microscopy. This optical technique provides nanometer depth resolution without mechanical contact and hence prevents large tension or perforation of the soft membrane. For dipalmitoyl phosphatidylcholine (DPPC) membranes in the gel phase, we observed deformations of several hundreds of nanometers when the driving voltage was about 0.1 V. The voltage and frequency responses of the vesicle deformation can be explained by the balance between the electroosmotic force inside the micropipet and the membrane tension. We also used DPPC:cholesterol vesicles to check the validity of this model. In the fluid phase, however, the deformation is independent of the modulation signal because micrometer-scale thermal fluctuations dominate the membrane motion.