Stability of Copper(II), Nickel(II) and Zinc(II) Binary and Ternary Complexes of Histidine,Histamine and Glycine in Aqueous Solution

The binary and mixed-ligand complexes formed between ligands (histidine (His), histamine (Him) and glycine (Gly)) and some transition metals (Cu(II), Ni(II) and Zn(II)) were studied potentiometrically in aqueous solution at (25.0 ± 0.1) C and I = 0.10 M KCl in order to determine the protonation constants of the free ligands and stability constants of binary and ternary complexes. The complexation model for each system has been established by the software program BEST from the potentiometric data. The most probable binding mode for each binary species of histidine and for all mixed species was also discussed based upon derived equilibrium constants and stability constants related to the binary species. The ambidentate nature of the histidine ligand, i.e. the ability to coordinate histamine-like, imidazolepropionic acid-like and glycine-like modes was indicated from the results obtained. The stability of ternary complexes was quantitatively compared with their corresponding binary complexes in terms of the parameters, log K, log X and ₁₁₁₀. The concentration distributions of various species formed in solution were also evaluated. In terms of the nature of metal ion, the complex stability follows the trend Cu(II) > Ni(II) > Zn(II), which is in agreement with the Irving-Williams order of metal ions. Thus, the results obtained were compared and evaluated with those in the literature.     

Removal of methyl violet from aqueous solution by perlite

The use of perlite for the removal of methyl violet from aqueous solutions at different concentration, pH, and temperature has been investigated. Adsorption equilibrium is reached within 1 h. The capacity of perlite samples for the adsorption of methyl violet was found to increase with increasing pH and temperature and decrease with expansion and increasing acid-activation. The adsorption isotherms are described by means of the Langmuir and Freundlich isotherms. The adsorption isotherm was measured experimentally at different conditions and the experimental data were correlated reasonably well by the adsorption isotherm of Langmuir. The order of heat of adsorption corresponds to a physical reaction. It is concluded that the methyl violet is physically adsorbed onto the perlite. The removal efficiency (P) and dimensionless separation factor (R) have shown that perlite can be used for removal of methyl violet from aqueous solutions, but unexpanded perlite is more effective.     

Ester derivatives of α-hydroxymethylacrylates: Itaconate isomers giving high molecular weight polymers

New ester derivatives of ethyl α-hydroxymethylacrylate were synthesized using acid chlorides (traditional solution reactions), sodium salts of acids (with phase transfer catalysis), and trifluoroacetic anhydride (trifluoroacetate). The interfacial process gave high yields of clean products under very mild conditions. Derivatives obtained include the formate, acetate, hexanoate, stearate, benzoate, trifluoroacetate, and adamantanoate. Bulk polymerizations with 2,2′-azobis (isobutyronitrile) gave high molecular weight polymers with intrinsic viscosities of over 2 dL/g and molecular weights of several million [based on size-exclusion chromatography (SEC) comparison to polystyrene standards]. These high molecular weights were the result of autoacceleration in the bulk as shown by monitoring molecular weight with respect to conversion. Solution polymerization in benzene gave more typical polymer, e.g., the acetate derivative showed an SEC molecular weight of 52,000. Glass transition temperatures for the n-alkyl esters decreased from the formate (77°C) to the hexanoate (15°C); the stearate showed a side-chain melting point of 40°C but no T_g. Glass transitions were observed for the trifluoroacetate, benzoate, and adamantanoate polymers at 69, 130, and 214°C, respectively. Solution ¹³C-NMR showed evidence of tacticity information for the formate and acetate derivatives with appaent preference for syndiotactic polymer formation similar to that of methyl methacrylate. FTIR and solid-state ¹³C-NMR analysis gave spectra with functional group peaks and chemical shift values expected based on composition. The stearate monomer and polymer gave solid-state ¹³C chemical shifts of 34 and 33 ppm, respectively, for the central CH₂ units consistent with monoclinic and orthorhombic crystal packing. © 1994 John Wiley & Sons, Inc.     

Removal of strontium ions by a crosslinked copolymer containing methacrylic acid functional groups</p> </p>

Summary A tail-made polymer matrix is proposed to remove strontium ions from aqueous solutions. The removal behavior of strontium ions on a crosslinked copolymer containing methacrylic acid as functional groups was investigated as a function of sorptive concentration, time, temperature and pH. It was observed that an increase of these parameters enhanced the removal of Sr(II) ions from aqueous solution. It is found that a maximum adsorption of Sr(II) ions can be obtained on the crosslinked copolymer after 30 minutes and at pH 8. The increase of Sr(II) ion concentration in the solution resulted in an increase in the amount of Sr(II) ions adsorbed on the crosslinked copolymer containing methacrylic acid as functional groups. However, after a maximum of Sr(II) concentration in the solution, the percentage of adsorbed Sr(II) ions decreased. The adsorption data are well represented by the Freundlich, Langmuir and Dubinin-Radushkevich (D-R) isotherms. The adsorption capacity of the copolymer and the free energy change were calculated by using the D-R isotherm. For the adsorption of Sr(II) ions on the crosslinked copolymer the thermodynamic parameters (DH°,DS° andDG°) were calculated.</p> </p>     

Natural radioactivity in soil samples of Kocaeli basin, Turkey

The city of Kocaeli is in the western part of Anatolia in Turkey and has a population of approximately 1.000.000. There is no information about radioactivity in the Kocaeli soils samples so far. For this reason, the concentrations of the natural radionuclides in soil samples from 27 different sampling stations in Kocaeli Basin and its surroundings have been determined. The results have been compared with other radioactivity measurements in different country"s soils. The typical concentrations of ¹³⁷Cs, ²³⁸U, ⁴⁰K, ²²⁶Ra, ²³²Th found in surface soil samples ranged from 2±0.6 to 25±6 Bq/kg, from 11±4 to 49±10 Bq/kg, from 161±30 to 964±127 Bq/kg, from 10±4 to 58±11 Bq/kg, and from 11±3 to 65±13 Bq/kg, respectively.     

Peak area determination and energy dependence of gamma- and X-ray peak tailing

Two analytical shape functions representing the shapes of - and characteristic X-ray photopeak sides obtained with a Ge(Li) detector are described. The photopeak centroid is accurately determined by using these functions. Energy dependence of photopeak tailing at the lower energy side of the photopeaks are obtained by the least-squares fitting method. The present method can be used for the analysis of partly overlapped photopeaks, one side of which is well resolved, with a sufficient accuracy.     

Measurement of L&agr; and Lß X-ray fluorescence cross sections in Er, Ta, W and Au by 16.896–59.543 keV photons

La and Lb X-ray fluorescence cross sections in Er, Ta, W and Au at excitation energies of 16.896, 22.581, 25.770, 32.890, 38.184, 43.949, 50.214 and 59.5 keV were investigated. Measurements were made using a low energy Si(Li) detector coupled to a model 4096 computerized multi-channel analyser. The experimental results were compared with the theoretically calculated values of L X-rays fluorescence cross sections and other experimental results. Good agreement was observed between experimental and theoretical values.     

Selective Voltammetric Detection of Epinephrine in the Presence of Ascorbic Acid at Poly(4-Methoxyphenol)-Modified Electrode1

A gold electrode was modified with electropolymerized films of 4-methoxyphenol by its oxidative polymerization from an alkaline solution by cyclic voltammetry. The modified electrode was then used to determine epinephrine (EP) in the presence of a high concentration of ascorbic acid (AA) by differential pulse voltammetry. The peak positions as well as relative sensitivity EP/AA were affected by the potential window used for the polymerization. For polymerization between 0 and 1.3 V, the peak potentials recorded in a phosphate buffer solution (pH = 7.2) were 516 and 312 mV vs. Ag/AgCl for EP and AA, respectively. In addition the effects of pH and the type of electrolyte on the linearity range and detection limit are investigated. The detection limit for 3s-test is 0.1 M. The high selectivity and sensitivity for epinephrine was found to be due to charge discrimination/analyte accumulation.     

Sm~(3 )在硼酸盐玻璃中的发光及Bi~(3 )对Sm~(3 )的敏化作用

早在六十年代,人们为了寻找较好的激光玻璃,曾对Sm~(3 )离子掺杂的玻璃中的光谱进行过研究。为了探寻新型的激光,发光玻璃,又进一步研究了Sm~(3 )在玻璃中的发光和敏化。我们以寻找一种高亮度,低成本的发光玻璃为目的,研究了基质玻璃组成,敏化离子及其浓度对Sm~(3 )发光性质的影响。 选择B_2O_3-BaO-M_mO_n(M_mO_n=Li_2O,Na_2O,K_2O,MgO,CaO,SrO)玻璃体系,所用原料的纯度皆为分析纯以上,用陶瓷坩埚在1250℃掺杂氧化钐(纯度均大于99％),玻璃的荧光谱和激发光谱,用MPF-4型荧光分光光度计测定。     

Determination of adsorptive properties of clay/water system: methylene blue sorption

In this study, adsorption of methylene blue onto clay was investigated. The effect of adsorption time and temperature on the adsorption process was studied. To reveal the adsorptive characteristics of the clay studied, porosity and BET surface area measurements were made. It was observed that the adsorption capacity decreases with increasing temperature, and adsorption equilibrium was attained within 1 h. It was found that the data fit well to Langmuir, Halsey, Henderson, and Harkins-Jura models but experimental data deviate significantly from BET and Freundlich models at especially high concentrations. Furthermore, isosteric adsorption enthalpy and entropy are calculated as -7.99 kJ mol(-1) and 25.41 JK(-1)mol(-1), respectively.