表面暴露活性位点的MoS_2纳米催化剂催化硝基化合物的非均相氢转移反应（英文）

MoS_2具有独特的二维层状结构,被广泛用于加氢脱硫过程以及HER反应,而且可以通过减少MoS_2的颗粒尺寸以及层数来进一步改善其催化活性.通过剥离方法得到的MoS_2纳米片虽然表现出优良的加氢脱硫活性,但容易团聚使其循环使用性能很差.如果通过引入纳米碳将单层的MoS_2纳米片进行有效"隔离",则可明显降低团聚的可能性,从而改善其催化性能和稳定性.本文通过一步水热法制备出了碳嵌入的MoS_2纳米颗粒(MoS_2@C),将其应用于硝基苯类化合物的氢转移反应中表现出了非常好的催化性能.进一步通过粉末X射线衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)和在线质谱检测等手段研究了层间距增加的MoS_2催化剂在硝基苯类化合物的氢转移反应中催化性能提升的原因.XRD,SEM和TEM结果表明,通过引入碳材料可以明显增加MoS_2的层间距,同时减小其颗粒尺寸,而且使MoS_2表现出弯曲的(002)晶面.由于存在一定的曲率,这种(002)晶面也会表现出一定的催化能力.氮气物理吸附结果表明,这种MoS_2@C复合物具有较高的比表面积(89 m~2g~(-1))和明显的介孔结构(~20 nm),在催化反应中有利于底物扩散,进而改善催化性能.XPS结果显示,与体相的MoS_2相比,MoS_2@C表面暴露出更多的不饱和Mo原子(Mo/S=0.71(MoS_2@C)vs Mo/S=0.63(MoS_2)),形成了独特的S-Mo-O结构以及缺陷结构.在硝基苯类化合物的氢转移反应中,层间距增加的MoS_2@C由于暴露出更多的活性位和具有弯曲的(002)晶面,表现出了更高的催化活性–(TOF=3.66 s~(-1) vs 1.24 s~(-1)(MoS_2)).通过质谱对反应过程的追踪发现,在只有肼存在的条件下,MoS_2@C催化肼分解的主要气相产物是氨气.这说明MoS_2@C能够使肼发生N-N键的断裂.而当肼和硝基苯同时存在的条件下,质谱检测的气相产物主要是氮气,表明硝基苯的存在可以诱导肼逐步发生N-H键断裂,在催化剂表面形成活性的H物种,进而转移到硝基苯上使其还原得到苯胺.使用偶氮苯和氧化偶氮苯作为反应底物,发现MoS_2@C很难使其还原为苯胺,这说明在该催化体系中,硝基苯的还原过程主要是沿着直接路径(硝基苯-亚硝基苯-苯胺)进行的.     

Phytochemical,cytotoxic and chemotaxonomic study on Ajuga forrestii Diels (Labiatae)

A phytochemical investigation of Ajuga forrestii Diels led to the isolation of 14 compounds, including eight neo-clerodane diterpenes (1–8), two phytoecdysteroids (9, 11), one stigmastane sterol (10) and three iridoid glycosides (12–14). The structures of these compounds were identified by spectroscopic methods and a comparison of their data with those reported in the literature. This is the first report of compounds 1–14 from A. forrestii. The cytotoxic activities of the aqueous extract of A. forrestii and several compounds have been studied and the chemotaxonomic significance of isolated compounds has also been summarised.     

Isolation, structure determination, and synthesis of galaxamide, a rare cytotoxic cyclic pentapeptide from a marine algae Galaxaura filamentosa

Galaxamide (1), a rare cyclic pentapeptide, was isolated from the marine algae Galaxaura filamentosa. A preliminary bioassay of Galaxamide showed remarkable in vitro antiproliferative activities against GRC-1 and HepG2 cell lines. The first total synthesis of the cyclic peptide was achieved for further biological evaluation.     

Selective Determination of Dopamine in the Presence of Ascorbic Acid at Porous‐Carbon‐Modified Glassy Carbon Electrodes

Selective dopamine (DA) determinations using porous‐carbon‐modified glassy carbon electrodes (GCE) in the presence of ascorbic acid (AA) were studied. The effects of structure textures and surface functional groups of the porous carbons on the electrochemical behavior of DA was analyzed based on both cyclic voltammetry (CV) and differential pulse voltammetry (DPV) measurements. The differential pulse voltammetry of DA on the modified GCE was determined in the presence of 400‐fold excess of AA, and the linear determination ranges of 0.05–0.99, 0.20–1.96, and 0.6–12.60 μM with the lowest detected concentrations of 4.5×10^?3, 4.4×10^?2, and 0.33 μM were obtained on the mesoporous carbon, mesoporous carbon with carboxylic and amino groups modified electrodes, respectively.     

Simple method for synthesizing few-layer graphene as cathodes in surface-enabled lithium ion-exchanging cells

In order to realize a wider application for graphene materials specifically in the field of energy storage, a simple and mass-scalable method described as “the atmospheric, low-temperature, shock-heating process” is proposed in this work. During this low-temperature process, the graphite oxide without pre-treatment is completely exfoliated to form the few-layer graphene materials at atmospheric conditions. The Brunauer-Emmett-Teller (BET)-specific surface area of acquired material at 350 °C can reach 487 m² g^?1. The acquired few-layer graphene materials are also confirmed by X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and high-resolution transmission electron microscopy (HRTEM). The results demonstrate that this simple method is feasible for synthesizing the few-layer graphene materials. Besides that, the acquired graphene is also used as the cathode material in the surface-enabled lithium ion-exchanging cell. The galvanostatic charge/discharge tests show that the graphene prepared from this method is suitable for this system and displays a satisfactory electrochemical performance. The acquired graphene sample exhibits the reversible capacities of around 187, 107, 84, 58, and 45 mAh g^?1 at 0.1, 2, 5, 10, and 15 A g^?1, respectively. At the current density of 0.5 A g^?1, the capacity retention can reach 75 % after 2000 cycles.     

Electrochemical strategy for ultrasensitive detection of microRNA based on MNAzyme-mediated rolling circle amplification on a gold electrode

Microchimica Acta - The authors describe an electrochemical strategy for ultrasensitive and specific detection of microRNA (miRNA). It is based on both multicomponent nucleic acid enzyme (MNAzyme)...     

Large-scale annotation of small-molecule libraries using public databases

While many large publicly accessible databases provide excellent annotation for biological macromolecules, the same is not true for small chemical compounds. Commercial data sources also fail to encompass an annotation interface for large numbers of compounds and tend to be cost prohibitive to be widely available to biomedical researchers. Therefore, using annotation information for the selection of lead compounds from a modern day high-throughput screening (HTS) campaign presently occurs only under a very limited scale. The recent rapid expansion of the NIH PubChem database provides an opportunity to link existing biological databases with compound catalogs and provides relevant information that potentially could improve the information garnered from large-scale screening efforts. Using the 2.5 million compound collection at the Genomics Institute of the Novartis Research Foundation (GNF) as a model, we determined that approximately 4% of the library contained compounds with potential annotation in such databases as PubChem and the World Drug Index (WDI) as well as related databases such as the Kyoto Encyclopedia of Genes and Genomes (KEGG) and ChemIDplus. Furthermore, the exact structure match analysis showed 32% of GNF compounds can be linked to third party databases via PubChem. We also showed annotations such as MeSH (medical subject headings) terms can be applied to in-house HTS databases in identifying signature biological inhibition profiles of interest as well as expediting the assay validation process. The automated annotation of thousands of screening hits in batch is becoming feasible and has the potential to play an essential role in the hit-to-lead decision making process.     

Fluorescence-detecting cationic surfactants using luminescent CdTe quantum dots as probes

A novel fluorescence quenching method for the determination of cationic surfactants (CS), specifically cetyltrimethylammonium bromide (CTAB), dodecyltrimethylammonium bromide (DTAB), and cetylpyridinium chloride (CPC), has been developed using water-soluble luminescent CdTe quantum dots (QDs) modified with thioglycolic acid (TGA). The possible interference from heavy and transition metals (HTM) has been efficiently eliminated through simple sample treatment with mercapto cotton made in-house. Under optimum conditions, the extent of fluorescence quenching of CdTe QDs is linearly proportional to the concentration of CS from 2.0 × 10⁻⁷ to 7.0 × 10⁻⁶ mol L⁻¹ with a detection limit of 5.0 × 10⁻⁸ mol L⁻¹. The relative standard deviation for 1.0 × 10⁻⁶ mol L⁻¹ CTAB is 2.5% (n = 6). The proposed method exhibits high sensitivity and selectivity and furthermore avoided the use of toxic organic solvents and tedious solvent extraction procedures. It has been applied to the determination of trace CS in natural river water and commodity samples with satisfactory results. Potential interference from heavy and transition metals is eliminated during photoluminescence detection of CS through simple sample pre-treatment with mercapto cotton     

半定规划的逆问题

本文提出了半定规划的逆问题,利用半定规划的最优性条件,分别给出了其在ｌ∞,ｌ１,ｌ２ 模意义下的数学模型,它们仍为半定规划问题．     

Fabrication of liquid crystal Fe3O4 composites and their magnetorheological properties

Some supramolecular polyacrylate-based liquid crystal polymers (PLCPs) were prepared by polyacrylic acid, a liquid crystal monomer and 3,5-pyridinedicarboxylic acid. Series of magnetic liquid crystal particles (Fe₃O₄@PLCPs) with core-shell structure were prepared by modifying surface of magnetic nanoparticles Fe₃O₄ by the PLCPs. The Fe₃O₄@PLCPs showed a saturation magnetization strength above 51.17 emu/g, which is similar to pure magnetic Fe₃O₄, indicating good magnetism and magnetic field dependence. Series of magnetorheological fluids were fabricated by Fe₃O₄@PLCPs (using as dispersed phase) and silicone oil (using as carrier liquid). The effects of mesogen, magnetic particle, and the polymer matrix on magnetorheological performance and settling stability were investigated. The magnetorheological fluid based on 10% Fe₃O₄@PLCP-1 showed the best performance at an applied magnetic field of 100 mT in this study. Furthermore, the magnetorheological fluids showed excellent settling stability because the density of Fe₃O₄@PLCPs was lower than that of Fe₃O₄. The Fe₃O₄@PLCPs-based fluids presented certain application potential in the field of magnetic fluid due to the excellent magnetorheological effect and settling stability.