量子点敏化太阳电池

基于量子限域效应的新型太阳电池——量子点敏化太阳电池(QD-SSCs),由于其最大理论转化效率超过了传统的Shockley-Queisser极限效率,已经成为目前最具研究潜力的太阳电池之一。本文综述了近几年来QD-SSCs领域的研究进展,主要从半导体氧化物纳米材料,特别是其低维纳米结构下的特殊性能;金属硫族化合物纳米晶;电解质;对电极等几个方面评述了电池材料的研究进展。另外,从量子点材料的制备和组装方面简述了目前电池光阳极的研究情况,并介绍了提高量子点光敏化性能的几个新途径。最后,从开路电压和短路电流角度分析了影响电池性能的几个关键因素,并对QD-SSCs今后的发展进行了展望。     

A Hairpin Electrochemical Aptasensor for Sensitive and Specific Detection of Thrombin Based on Homogenous Target Recognition

An electrochemical aptasensor was developed for sensitive and specific detection of thrombin by combining homogenous recognition strategy and gold nanoparticles (AuNPs) amplification. Streptavidin‐alkaline phosphatase was used as reporter molecule. Compared with the traditional hairpin aptasensor monitoring the distance of the redox molecule from the electrode surface, the proposed aptasensor successfully overcome the limitations of distance and improved the stability and high affinity of the aptamer hairpin through homogenous recognition, which enhanced the sensitivity and selectivity of the sensors effectively. Additionally, AuNPs were employed to increase the active area and conductivity of the electrode, thus, improving the sensitivity of the aptasensor. As a result, the designed thrombin detection sensor obtained a lower detection limit of 0.52 pM in buffer and 6.9 pM in blood serum.     

Electrochemical Recognition of Chiral Molecules with Poly(4‐bromoaniline) Modified Gold Electrode

A poly(4‐bromoaniline) (PBA) film is electrochemically synthesized on a gold electrode for the recognition of amino acids enantiomers. Scanning electron microscopy measurements show that the porous PBA films are made up of nano‐ribbons. At the PBA modified Au electrode differential pulse voltammograms of L ‐ and D ‐glutamic acids not only have very different current densities, but also produce different waveforms, providing an intuitive way to differentiate the two chiral molecules. Similar results are obtained in analyzing L ‐ and D ‐aspartic acids. Control experiments suggest that the observed sensing behavior arises from synergistic interactions between Au and the PBA film, where polymerization at the meta‐position creates a steric structure needed for differentiating chiral molecules.     

Electrochemical DNA Biosensor Based on Partially Reduced Graphene Oxide Modified Carbon Ionic Liquid Electrode for the Detection of Transgenic Soybean A2704‐12 Gene Sequence

In this work a partially reduced graphene oxide (p‐RGO) modified carbon ionic liquid electrode (CILE) was prepared as the platform to fabricate an electrochemical DNA sensor, which was used for the sensitive detection of target ssDNA sequence related to transgenic soybean A2704‐12 sequence. The CILE was fabricated by using 1‐butylpyridinium hexafluorophosphate as the binder and then p‐RGO was deposited on the surface of CILE by controlling the electroreduction conditions. NH₂ modified ssDNA probe sequences were immobilized on the electrode surface via covalent bonds between the unreduced oxygen groups on the p‐RGO surface and the amine group at the 5′‐end of ssDNA, which was denoted as ssDNA/p‐RGO/CILE and further used to hybridize with the target ssDNA sequence. Methylene blue (MB) was used as electrochemical indicator to monitor the DNA hybridization. The reduction peak current of MB after hybridization was proportional to the concentration of target A2704‐12 ssDNA sequences in the range from 1.0×10^?12 to 1.0×10^?6 mol/L with a detection limit of 2.9×10^?13 mol/L (3σ). The electrochemical DNA biosensor was further used for the detection of PCR products of transgenic soybean with satisfactory results.     

Analytical Properties of Solid-substrate Electrospray Ionization Mass Spectrometry

Conventional electrospray ionization mass spectrometry (ESI-MS) uses a capillary for sample loading and ionization. Along with the development of ambient ionization techniques, ESI-MS using noncapillary emitters has attracted more interest in recent years. Following our recent report on ESI-MS using wooden tips (Anal. Chem. 83, 8201–8207 (2011)), the technique was further investigated and extended in this study. Our results revealed that the wooden tips could serve as a chromatographic column for separation of sample components. Sequential and exhaustive ionization was observed for proteins and salts on wooden tips with salts ionized sooner and proteins later. Nonconductive materials that contain microchannels/pores could be used as tips for ESI-MS analysis with sample solutions loaded to the sharp-ends only, since rapid diffusion of sample solutions by capillary action would enable the tips to become conductive. Tips of inert materials such as bamboo, fabrics, and sponge could be used for sample loading and ionization, while samples such as tissue, mushroom, and bone could form tips to induce ionization for direct analysis with application of a high voltage.

Detection of dopamine in the presence of excess ascorbic acid at physiological concentrations through redox cycling at an unmodified microelectrode array

The electrochemical behavior of dopamine was examined under redox cycling conditions in the presence and absence of a high concentration of the interferent ascorbic acid at a coplanar, microelectrode array where the area of the generator electrodes was larger than that of the collector electrodes. Redox cycling converts a redox species between its oxidized and reduced forms by application of suitable potentials on a set of closely located generator and collector electrodes. It allows signal amplification and discrimination between species that undergo reversible and irreversible electron transfer. Microfabrication was used to produce 18 individually addressable, 4-μm-wide gold band electrodes, 2 mm long, contained in an array having an interelectrode spacing of 4 μm. Because the array electrodes are individually addressable, each can be selectively biased to produce an overall optimal electrochemical response. Four adjacent microbands were shorted together to serve as the collector, and were flanked on each side by seven microbands shorted as the generator (a ratio of 1:3.5 of electroactive area, respectively). This configuration achieved a detection limit of 0.454?±?0.026 μM dopamine at the collector in the presence of 100 μM ascorbic acid in artificial cerebrospinal fluid buffer, concentrations that are consistent with physiological levels. Enhancement by surface modification of the microelectrode array to achieve this detection limit was unnecessary. The results suggest that the redox cycling method may be suitable for in vivo quantification of transients and basal levels of dopamine in the brain without background subtraction.

Tuning of Ti-doped mesoporous silica for highly efficient enrichment of phosphopeptides in human placenta mitochondria

Extraction of phosphopeptides from rather complex biological samples has been a tough issue for deep and comprehensive investigation into phosphoproteomes. In this paper, we present a series of Ti-doped mesoporous silica (Ti-MPS) materials with tunable composition and controllable morphology for highly efficient enrichment of phosphopeptides. By altering the molar ratio of silicon to titanium (Si/Ti) in the precursor, the external morphology, Ti content, internal long-rang order, and surface area of Ti-MPS were all modulated accordingly with certain regularity. Tryptic digests of standard phosphoprotein α- and β-casein were employed to assess the phosphopeptide enrichment capability of Ti-MPS series. At the Si/Ti molar ratio of 8:1, the optimum enrichment performance with admirable sensitivity and capacity was achieved. The detection limit for β-casein could reach 10 fmol, and 15 phosphopeptides from the digest of α-casein were resolved in the spectrum after enrichment, both superior to the behavior of commercial TiO₂ materials. More significantly, for the digest of human placenta mitochondria, 396 phosphopeptides and 298 phosphoproteins were definitely detected and identified after enrichment with optimized Ti-MPS material, demonstrating its remarkable applicability for untouched phosphoproteomes. In addition, this research also opened up a universal pathway to construct a composition-tunable functional material in pursuit of the maximum performance in applications.

Synthesis and self-assembly behaviors of four-armed amphiphilic polystyrene-b-poly(N-isopropylacrylamide) copolymers

Four-armed amphiphilic block copolymers polystyrene-b-poly(N-isopropyl acrylamide) (PSt-b-PNIPAAM)₄ were synthesized by atom transfer radical polymerization (ATRP) in two steps. Star narrow dispersed polystyrene, (PSt-Br)₄, with controlled number-average molecular weight was firstly synthesized by ATRP of styrene (St) using pentaerythritol tetrakis (2-bromoisobutyrate) (4Bri-Bu) as four-armed initiator. Then, (PSt-b-PNIPAAM)₄ was prepared using (PSt-Br)₄ as macroinitiator by ATRP. The structures of (PSt-Br)₄ and (PSt-b-PNIPAAM)₄ were confirmed by characterization by nuclear magnetic resonance (¹H NMR). The apparent viscosity of the four-armed (PSt-b-PNIPAAM)₄ was significantly lower than that of the linear PSt-b-PNIPAAM with the same amount of repeat units of PSt and PNIPAAM. The self-assembly behavior of the four-armed amphiphilic block copolymers (PSt-b-PNIPAAM)₄ in mixed solution (DMF/H₂O) and the lower critical solution temperature (LCST) of the resulting micelles were investigated by scanning electron microscopy (SEM), dynamic light scattering (DLS) and UV-VIS spectroscopy. The results show that the size of the mono-dispersed spherical micelles decreased with the increment of the chain length of PNIPAAM in the block copolymers, while LCST increased.     

Coupling of ultrasound‐assisted extraction and expanded bed adsorption for simplified medicinal plant processing and its theoretical model: Extraction and enrichment of ginsenosides from Radix Ginseng as a case study

A high‐efficient and environmental‐friendly method for the preparation of ginsenosides from Radix Ginseng using the method of coupling of ultrasound‐assisted extraction with expanded bed adsorption is described. Based on the optimal extraction conditions screened by surface response methodology, ginsenosides were extracted and adsorbed, then eluted by the two‐step elution protocol. The comparison results between the coupling of ultrasound‐assisted extraction with expanded bed adsorption method and conventional method showed that the former was better than the latter in both process efficiency and greenness. The process efficiency and energy efficiency of the coupling of ultrasound‐assisted extraction with expanded bed adsorption method rapidly increased by 1.4‐fold and 18.5‐fold of the conventional method, while the environmental cost and CO₂ emission of the conventional method were 12.9‐fold and 17.0‐fold of the new method. Furthermore, the theoretical model for the extraction of targets was derived. The results revealed that the theoretical model suitably described the process of preparing ginsenosides by the coupling of ultrasound‐assisted extraction with expanded bed adsorption system.     

Separation,interconversion, and insecticidal activity of the cis‐ and trans‐isomers of novel hydrazone derivatives

A series of cis‐ and trans‐isomers of hydrazone derivatives were separated and analyzed through HPLC with diode‐array detection and HPLC‐MS/MS using ESI and ion trap MS. Two single crystals (A‐5‐1 and C‐2‐1) of the trans‐isomers were obtained and determined using X‐ray crystallography data, and the cis‐ to trans‐isomerization under different conditions was discussed. Both of the cis‐ and trans‐isomers of A‐4 and A‐5 exhibited good insecticidal activities against Plutella xylostella.