Headspace Solid-phase Microextraction–Gas Chromatographic–Mass Spectrometric Analysis of the Essential Oils of Two Traditional Chinese Medicines, Angelica pubescens and Angelica sinensis

Angelica pubescens and Angelica sinensis belong to the Umbelliferae family and both are used as traditional Chinese medicines. In the present study, headspace solid-phase microextraction (HS-SPME) with gas chromatography-mass spectrometry (GC-MS) was used for the analysis of the volatile constituents present in their roots. Eighty-seven compounds in Angelica pubescens and thirty-six compounds in Angelica sinensis were identified by GC-MS. Their relative contents were calculated by the peak area ratio. HS-SPME was compared to steam distillation (SD) by analyzing the volatile constituents of Angelica sinensis root. A good agreement between results obtained with both techniques was found. As a conclusion, HS-SPME is a powerful tool for determining the volatile constituents present in the TCMs.     

钴-5,10,15,20-四(3-甲氧基-4-羟基苯基)卟啉修饰玻碳电极的L-抗坏血酸化学传感器研究

将水合 5,10,15,20-四-(3-甲氧基-4-羟基苯基)钴卟啉(CoTMHPP)修饰在玻碳电极表面,制成CoTMHPP修饰电极.电极稳定性好且灵敏度高,对抗坏血酸有良好的电催化氧化作用,测定线性响应范围为1.0×10(-5)～1.0×10(-2)mol/L,响应时间小于12s.本文研究了电极的性质和应用,并用于药物中抗坏血酸的测定,其测定结果与碘量法一致.     

喷雾热解法合成球形(Y,Gd)BO3:Eu荧光粉的研究

采用喷雾热解法合成了无团聚的球形(Y,Gd)BO3∶Eu荧光粉。研究了各因素对(Y,Gd)BO3∶Eu荧光粉体的结晶性能、外观形貌及发光强度的影响。结果表明,按120%硼酸的化学计量比于900℃喷雾热解,再经过1200℃后处理2 h,可以合成结晶良好的(Y,Gd)BO3∶Eu荧光粉体;喷雾热解溶液的浓度和载气流量对荧光粉的外观形貌影响较大;铕含量为10%时可以获得最佳的发光强度。在优化喷雾热解实验条件下成功合成出良好发光强度的PDP用(Y0.6Gd0.3)BO3∶Eu0.1荧光粉。     

Synthesis and Crystal Structure of （Et4N）2[Pd2（mp）2（mpH）2]

ＳｙｎｔｈｅｓｉｓａｎｄＣｒｙｓｔａｌＳｔｒｕｃｔｕｒｅｏｆ（Ｅｔ_４Ｎ）_２［Ｐｄ_２（ｍｐ）_２（ｍｐＨ）_２］ＳｈｉＪｉ－Ｃｈｅｎｇ；ＨｕａｎｇＸｉａｏ－Ｙｉｎｇ；ＷｅｎＴｉｎｇ－Ｂｉｎ；ＤｅｎｇＹｕ－Ｈｅｎｇ；ＣｈｅｎｇＣｈａｎｇ－Ｎｅｎｇ；Ｌｉ?..     

Determination of acetone, hexanal and heptanal in blood samples by derivatization with pentafluorobenzyl hydroxylamine followed by headspace single-drop microextraction and gas chromatography–mass spectrometry

In the study, we developed a simple, rapid, sensitive, and inexpensive method for determination of the disease biomarkers of acetone, hexanal and heptanal in human blood. For the first time, derivatization of carbonyls with O-2,3,4,5,6-(pentafluorobenzyl)hydroxylamine (PFBHA) was combined with headspace single-drop microextractin (HS-SDME) and gas chromatography-mass spectrometry (GC–MS) and applied to the analysis of acetone, hexanal, and heptanal in human blood. At first, acetone, hexanal and heptanal in blood were derivatized with PFBHA and formed oximes in several seconds. Sequentially, the oximes were headspace extracted and concentrated by a microdrop solvent. Finally, the extracted oximes were analyzed by GC–MS. HS-SDME conditions and method validations were studied. Due to needing of only 2 μl organic solvent, short extraction time of 8 min, and simple operation, derivatization-HS-SDME was shown to be a rapid, simple, and inexpensive technique for analysis of acetone, hexanal, and heptanal in human blood. Moreover, it had low detection limit values from 0.24 to 0.62 nM, and good reproducibility (R.S.D. less than 12%).     

碘离子选择电极在动力学分析中的应用 Ⅰ.催化电势动力学测锆法研究

本文报道采用碘离子选择电极,系统研究了锆于BO_3~--I~-反应中的定量催化特性,建立了催化电势动力学间接测痕量锆的方法。结果表明,本法专属性较高,55种阴、阳离子均不干扰测锆。     

电动势法测定Cu(Ⅰ)与乙炔生成配合物的热力学函数

乙炔与Cu(I)生成配合物的热力学函数文献报道鲜见,且不同作者的测定结果差异较大。本文用改进的电动势法。对在氯丁橡胶、聚氯乙烯,乙醛等工业过程有重大意义的Cu(I)与乙炔配合物进行测定,得到更合理的结果。     

Selective Oxidation of Isobutene over CsFeCoBiMnMoOx Mixed Oxide Catalyst

Mixed oxide catalyst Cs0.1Fe2Co6BiMnMo12Ox was prepared by the coprecipitation method.Selective oxidation of isobutene was carried out in a fixed-bed reactor over Cs0.1Fe2Co6BiMnMo12Ox.The results showed that the catalyst had high catalytic activity. Under the optimum reaction conditions(n(i-C4):n(O2)=1:2-1:4, space velocity=180 h^-1, T=360℃), the yields of methacrolein and methacrylic acid can reach 80% and 8%, respectively. The total yield of liquid products (methacrolein, methacrylic acid and acetic acid) can reach about 90%.     

The determination of intrinsic reaction coordinates by density functional theory

The first implementation of the intrinsic reaction coordinate (IRC ) method within the density functional theory (DFT ) framework is presented. The implementation has been applied to four different types of chemical reactions represented by the isomerization process, HCN ? HNC (A); the S_N2 process, H^? + CH₄ ? CH₄ + H^? (B); the exchange process, H˙ + HX ? HX + H˙ (X ? F,Cl) (C); and the elimination process, C₂H₅Cl ? C₂H₄ + HCl (D). The present study presents for each process optimized structures and calculated harmonic vibrational frequencies for the reactant(s), the transition state, and the product(s) along with the IRC path connecting the stationary points. The calculations were carried out within the local density approximation (LDA ) as well as the LDA/NL scheme where the LDA energy expression is augmented by Perdew's and Becke's nonlocal (NL ) corrections. The LDA and LDA/NL results are compared with each other as well as the best available ab initio calculations and experimental data. For reaction (D), ab initio calculations based on MP 2 geometries and MP 4SDTQ energies have been added due to the lack of accurate published post-HF calculations on this process. A detailed discussion is provided on the efficiency of the IRC algorithms, the relative accuracy of the DFT and ab initio schemes, as well as the reaction mechanisms of the four reactions. It is concluded that the LDA/NL scheme affords the same accuracy as does the MP 4 method. The post-HF methods seem to overestimate activation energies, whereas the corresponding LDA/NL estimates are too low. The LDA activation energies are even lower than the LDA/NL counterparts. The incorporation of the IRC method into the DFT framework provides a promising and reliable tool for probing the chemical reaction path on the potential energy surfaces, even for large-size systems. IRC calculations by ab initio methods of an accuracy similar to the LDA/NL scheme, such as the MP 4 scheme, are not feasible. © John Wiley & Sons, Inc.