The entropy of small clusters of atoms using an Einstein model

We present a generalized Einstein model for calculating thermodynamic properties of small clusters of atoms and demonstrate its validity by comparing its predictions with Burton's exact calculations. The simplicity of the method enables one to easily compute thermodynamic quantities for many systems beyond those previously considered.     

Effect of trace amounts of water on organic solvent transport through gamma-alumina membranes with varying pore sizes

The transport behavior of toluene and n-hexane in gamma-alumina membranes with different pore diameters was studied. It was shown that the permeability of water-lean hexane and toluene is in agreement with Darcy's law down to membrane pore diameters of 3.5 nm. The presence of molar water fractions of 5-8 x 10(-4) in these solvents led to a permeability decrease of the gamma-alumina layer by a factor of 2-4 depending on pore size. In general, a lower permeability was found for hexane than for toluene. Moreover, in the presence of water a minimum applied pressure of 0.5-1.5 bar was required to induce net liquid flow through the membrane. These phenomena were interpreted in terms of capillary condensation of water in membrane pores with a size below a certain critical diameter. This is thought to lead to substantial blocking of these pores for transport, so that the effective tortuosity of the membrane for transport of hydrophobic solvents increases.     

Selective pervaporation of water through a nonselective microporous titania membrane by a dynamically induced molecular sieving mechanism

Pervaporation experiments were performed on microporous titania membranes using several binary liquids containing 2-20 wt % water. The membrane was nonselective in the separation of water from alcohols and p-dioxane but showed a remarkably high selectivity in the separation of water from ethylene glycol/water mixtures with < or =15 mol % water. The absence of selectivity under most conditions is explained by the large pore size (0.9 nm) of microporous titania. The high selectivity for water in the separation from ethylene glycol can be explained by the formation of a hydrogen-bonded network of ethylene glycol in the micropores, which blocks transport of ethylene glycol, while water can still permeate through. These networks are disrupted by water at higher concentrations, leading to full loss of membrane selectivity.     

1,3‐Dimethyl‐2‐oxo‐4,6‐diphenyl‐1,2,3,4‐tetrahydropyridine‐3‐carbonitrile

The crystal structure of the title compound, C₂₀H₁₈N₂O, reveals a distorted half‐chair conformation of the central tetra­hydro­pyridine (THP) ring, with the cyano‐ and adjacent phenyl‐substituted C atoms displaced by 0.329 (1) and ?0.315 (1) Å, respectively, from the THP best plane. Steric interactions force the phenyl rings out of the THP plane by 49.21 (9) and 65.76 (5)°. The cyano moiety is coplanar with the THP plane.     

Potassium carbonate,a support for the green synthesis of azoles and diazines

A novel potassium carbonate mediated synthesis of 2‐amino‐1,3‐thia/oxa zoles, 2‐amino‐1,3,4‐thia/oxa diazines and 2‐hydrazino‐1,3,4‐thiadiazines has been described here. The use of K₂CO₃ allows for an aqueous workup thereby eliminating the organic solvent from both the reaction step and post reaction stage, without compromising the yield and reaction time.     

Large‐scale extrusion processing and characterization of hybrid nylon‐6/SiO2 nanocomposites

Solution impregnations, pulltrusion and film stacking are widely used methods to prepare thermoplastic composite materials. Extruders are used to melt the polymer and to incorporate fibers into the polymer in order to modify physical properties. In this article, the compounding of colloidal silica nanoparticles filled polyamide‐6 (PA‐6) is achieved using a twin‐screw extruder, which has a significant market share due to its low cost and easy maintenance. The experiments were performed at 250 rpm and the bulk throughput was 6 kg h^?1 with a pump pressure of 30 bars. The composites were characterized with nuclear magnetic resonance (NMR), wide angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). As determined by WAXD, the PA‐6 showed higher amounts of γ‐phase when compared to other synthesis methods such as in situ polymerization. TEM pictures showed that the silica particles aggregated nevertheless, upon addition of 14% (w/w) silica the E‐modulus increased from 2.7 to 3.9 GPa indicating that an effective mechanical coupling with the polymer was achieved. The behavior, illustrated with dynamic mechanical analysis (DMA) curves, indicated that in general when a filled system is compared to unfilled material, the values of the moduli (E′ and E″) increased and tan δ decreased. Determination of molecular mass distribution of the samples by means of size exclusion chromatography (SEC) coupled to a refractive index (RI), viscosity (DV) and light scattering (LS) detector revealed that the addition of silica did not decrease the average molecular weight of the polymer matrix, which is of importance for composite applications. Copyright © 2004 John Wiley & Sons, Ltd.     

Magnetically aligned phospholipid bilayers with large q ratios stabilize magnetic alignment with high order in the gel and L(alpha) phases

The magnetic alignment behavior ofbicelles (magnetically alignable phospholipid bilayered membranes) as a function of the q ratio (1,2-dihexanoyl-sn-glycerol phosphatidylcholine/1,2-dimyristoyl-sn-glycerol phosphatidylcholine mole ratio) and temperature was studied by spin-labeled X-band electron paramagnetic resonance (EPR) spectroscopy and solid-state 2H and 31P NMR spectroscopy. Well-aligned bicelle samples were obtained at 45 degrees C for q ratios between 2.5 and 9.5 in both the EPR and NMR spectroscopic studies. The molecular order of the system, S(mol), increased as the q ratio increased and as the temperature decreased. For higher q ratios (> or = 5.5), bicelles maintained magnetic alignment when cooled below the main phase transition temperature (approximately 30 degrees C when in the presence of lanthanide cations), which is the first time, to our knowledge, that bicelles were magnetically aligned in the gel phase. For the 9.5 q ratio sample at 25 degrees C, S(mol) was calculated to be 0.83 (from 2H NMR spectra, utilizing the isotopic label perdeuterated 1,2-dimyristoyl-sn-glycerol phosphatidylcholine) and 0.911 (from EPR spectra utilizing the spin probe 3beta-doxyl-5alpha-cholestane). The molecular ordering of the high q ratio bicelles is comparable to literature values of S(mol) for both multilamellar vesicles and macroscopically aligned phospholipid bilayers on glass plates. The order parameter S(bicelle) revealed that the greatest degree of bicelle alignment was found at higher temperatures and larger q ratios (S(bicelle) = -0.92 for q ratio 8.5 at 50 degrees C).     

Fluxional processes in diamagnetic and paramagnetic allyl dicarbonyl and 2-methylallyl dicarbonyl molybdenum histidinato complexes as revealed by spectroscopic data and density functional calculations

This work describes a detailed study on the structure and dynamics of pseudooctahedral low-valent complexes of the type [Mo(His-N(epsilon)-R)(eta-2-R'-allyl)(CO)(2)] (His=N(delta),N,O-L-histidinate; R=H, R'=H (1); R=C(2)H(4)CO(2)Me, R'=H (2); R=H, R'=Me (3); R=C(2)H(4)CO(2)Me, R'=Me (4)). These diamagnetic 18-electron complexes were comprehensively characterized spectroscopically and by X-ray crystallography. In the solid state, the (substituted) allyl ligand is in an endo position in all compounds, but it is trans to the His-N(delta) atom in 1 and 2, whereas it is trans to the carboxylate O atom for the 2-Me-allyl compounds 3 and 4. In solution, both isomers are present in a solvent-dependent equilibrium. The third isomer (allyl trans to His-NH(2)) is not spectroscopically observed in solution. This is in agreement with the results from density functional (DFT) computations (BPW 91 functional) for 1 and 3, which predict a considerably higher energy (+6.3 and +5.9 kJ mol(-1), respectively) for this isomer. A likely path for isomerization is calculated, which is consistent with the activation energy determined by variable temperature NMR measurements. At least for 3, the preferred path involves several intermediates and a rotation of the 2-Me-allyl ligand. For the paramagnetic 17-electron congeners, DFT predicts the exo isomer of 3(+) with the 2-Me-allyl ligand trans to the carboxylate O atom to be by far the most stable isomer. For 1(+), an endo-exo equilibrium between the isomers with the allyl ligand trans to the carboxylate O atom is suggested. These suggestions are confirmed by EPR spectroscopy on the electrochemically generated species, which show signals for one- (4) and two- (2) metal-containing compounds. The appearance of the EPR spectra may be rationalized by inspection of the SOMOs from DFT calculations of the species in question. The notion of a metal-centered oxidation is also substantiated by IR spectroelectrochemistry and by UV/Vis spectra of the 17-electron complexes. Upon depleting the metal of electron density, the stretching vibrations of the carbonyl ligands shift more than 100 cm(-1) to higher wavenumbers, and the carbonyl vibration of the metal-coordinated carboxylate shifts by about 50 cm(-1). A color change from yellow to green upon oxidation is observed visually and quantified by the appearance of a new band at 622 nm (2(+)) and 546 nm (4(+)), respectively.     

Facile route to 3,5-disubstituted morpholines: enantioselective synthesis of O-protected trans-3,5-bis(hydroxymethyl)morpholines

[reaction: see text] (3R,5R)-1 R1 & R2 = TBDPS, (3S,5R)-2 R1 = Bn,R2 = TBDPS, (3S,5S)-3 R2 & R2 = Bn. trans-3,5-Bis(benzyl/tert-butyldiphenylsilyloxymethyl)morpholines, promising candidates for the C(2)-symmetric class of chiral reagents, were prepared with excellent optical purity. A key step in the synthesis is the coupling of a serinol derivative with 2,3-O-isopropylideneglycerol triflate or its equivalent. This methodology was extended to the synthesis of chiral trans-3-(benzyloxymethyl)-5-(tert-butyldiphenylsilyloxymethyl)morpholine, a potentially useful chiral building block.     

C—H⋯N and C—H⋯π interactions in 2‐ethoxy‐4,6‐diphenylpyridine‐3‐carbonitrile

The title compound, C₂₀H₁₆N₂O, has two mol­ecules in the asymmetric unit and the crystal structure shows that the central pyridine ring of each mol­ecule has a flat boat conformation. The terminal C atom in one of the mol­ecules is disordered over two positions, with relative occupancies of 0.594 (14) and 0.398 (14). Intermolecular C—H?N and C—H?π interactions and π–π stacking, along with intramolecular C—H?N and C—H?π interactions, help to stabilize the structure.