大空间位阻β-二亚胺镁配合物的合成、晶体结构及硅氢化反应

2,4-戊二酮分别与不同的伯胺反应,合成出2种新的大空间位阻的β-二亚胺配体。其中β-二亚胺配体1与格氏试剂甲基碘化镁（MeMgI）反应得到相应四配位镁的甲基配合物,配体1的锂盐与溴化镁（MgBr₂）反应制备出Mg-Li双金属溴配合物。新β-二亚胺配体和相应镁的甲基配合物和溴配合物的晶体结构均通过单晶X射线衍射确定,相应镁的甲基配合物和溴配合物在苯乙酮的硅氢化反应中显示了较好的催化活性。     

稀土掺杂Lu3Al5O12荧光粉的发光特性及能量传递

采用高温固相法制备了Ce、Sm共掺Lu_3Al_5O_(12)荧光粉。通过X射线衍射分析、荧光光谱分析研究了样品的结构、发光特性,并通过理论计算研究了能量传递效率、能量传递的临界距离以及能量传递方式。X射线衍射分析表明所制备的荧光粉具有单一的石榴石结构;荧光光谱分析表明,在464 nm蓝光激发下,Sm~(3+)的引入可增加Lu_3Al_5O_(12)∶Ce,Sm发射光谱中红光成分,并且随着Sm~(3+)浓度的增加,Ce~(3+)发光强度逐渐减弱。计算出Ce~(3+)、Sm~(3+)之间的能量传递效率高达77.42%,确定了Ce~(3+)、Sm~(3+)之间的能量传递机制为偶极-偶极相互作用。     

模板剂缓释法合成分子筛大单晶

在分子筛的合成中,通过使用四咪唑基取代的硼类化合物（四咪唑硼钠）作为模板剂,在溶剂热条件下,成功得到了磷酸铝盐分子筛AlPO₄-11的大单晶。电喷雾质谱、¹⁹F和¹¹B NMR等研究结果表明,在溶剂热条件下四咪唑硼钠起到了缓释剂的作用,其自身经历缓慢分解,持续释放低浓度咪唑分子的过程。由其释放出来的咪唑分子起到事实上的模板作用。因其浓度较低,限制了分子筛结晶过程中晶核形成的数量,从而易于导向分子筛大单晶的生成。通过引入不同种类的四取代硼类化合物作为模板剂,这种分子筛大单晶的合成策略可潜在应用于其它分子筛材料。     

基于金银纳米立方体构建高灵敏CA-153传感器的研究

癌抗原-153(CA-153)是乳腺癌最重要的特异性标志物。利用CA-153与其抗体之间的特异性识别性构建"三明治"夹心结构的免疫传感器,在玻碳电极上修饰金纳米/氧化石墨烯复合材料,通过纳米金和CA-153抗体之间的吸附作用,将抗体固定于电极表面,以牛血清白蛋白封闭非特异性吸附位点。金银(AuAg)纳米立方体标记CA-153二抗,标记的AuAg纳米立方体催化过氧化氢氧化电子媒介体硫堇,采用差分脉冲伏安法检测CA-153的电化学信号。在最优条件下,此传感器的响应电流与CA-153浓度的对数在2.0×10~(-5)~100 U/mL范围内呈良好的线性关系,检出限(S/N=3)为7.0×10~(-6)U/mL。对实际血清样品进行加标回收实验,回收率为92.2%~110.2%,相对标准偏差不大于8.7%。     

走滑断裂分段叠置区物理模拟及构造差异性解析——以塔里木盆地顺北1号断裂为例

走滑断裂分段叠置区通常包括拉分叠置区和挤压叠置区,其形成及演化与油气藏关系密切,其内部构造特征对油气运聚具有重要影响。塔里木盆地顺托果勒地区顺北1号断裂叠置区分段发育特征明显,油气勘探表明,拉分叠置区和挤压叠置区对油气运聚的控制能力有一定差异。在分析构造特征的基础上,对走滑断裂拉分叠置区和挤压叠置区开展了物理模拟实验研究,结果显示,拉分叠置区内发育有多组里德尔（R）剪切和压剪性（P）剪切,在叠置区内多组断裂组成一套平面范围较小、垂向断距较大的雁列地堑系统;挤压叠置区内仅发育一组R剪切、P剪切及单条共轭里德尔（R'）剪切,并在叠置区内形成平面范围较大、垂向断距较小的地垒。因此认为,基底断裂的几何形态、运动性质是控制叠置区发育类型的关键因素。叠置区内断裂发育的数量、规模均受控于总走滑量,并与之呈正相关。相较于挤压叠置区,拉分叠置区的断层数更多,分布更密且地层破碎变形程度更高。在构造特征及力学机制上,拉分叠置区均表现出更强的油气富集潜力。     

Influence of the structure parameters on the gain and noise figure in silicon parametric amplifiers based on SOI Rib waveguides

Gain and Noise figure (NF) characteristics in dual-pump parametric amplifier based on silicon on insulator (SOI) Rib waveguides are numerically investigated in the presence of nonlinear losses. The impact of structure parameters of the silicon optical parametric amplifiers (SOPAs) on the gain and the NF are also analyzed. The results show that both the height and the width of the silicon on insulator (SOI) can affect the gain and the NF of SOPAs. 354 nm bandwidth (3 dB) and 8.135 maximum gain can be achieved by tailoring the structure parameters of the SOI rib waveguides. Moreover, the dispersion and the effective mode area of SOI are also analyzed.     

Impact of CHFa Plasma Treatment on A1GaN/GaN HEMTs Identified by Low-Temperature Measurement

We investigate the impact of CHFa plasma treatment on the performance of AIGaN/GaN HEMT （F-HEMT） by a temperature-dependent measurement in the thermal range from 6 K to 295 K. Tlle temperature dependence of the transconductance characteristics in F-HEMT declares that the Coulomb scattering and the optical phonon scattering are effectively enhanced by the fluorine ions in the A1GaN layer. The fluorine ions not only provide immobile negative charges to deplete 2DEG, but also enhance the Schottky barrier height of the metal gate. Thermal activation of the carrier traps induced by CHF3 plasma for F-HEMT contributes to the negative shift of the threshold voltage by -3.4mV/℃ with the increasing temperature. The reverse gate-leakage current of F-HEMT is decreased by more than two-order magnitude in comparison with that of conventional A1GaN/GaN HEMT （C-HEMT） without fluorine ions.     

Novel Image Optimization Method for Joint Photoacoustic Tomography

The distribution of speed of sound （SOS） in biomedical tissue and delay compensation （DC） have significant impact on the image quality of photoacoustic tomography （PAT）. When imaging human peripheral joints, using fixed SOS and DC can only ensure that the reconstructed images are focused in a limited depth range, whereas they are defoeused at other depths, which cause severe artifacts and blurring. In this work, a linear-DC based reconstruction approach is proposed to focus the whole PAT image region. It is proved by two in vivo experiments that, compared with traditional delay-and-sum back projection algorithms, the proposed method can effectively optimize the image quality of articular tissues in PAT.     

Passively Q-Switched Tm,Ho：YVO4 Laser with Cr：ZnS Saturable Absorber at 2 μm

A stable diode-pumped passively Q-switched Tm,Ho：YVO4 laser with Cr：ZnS saturable absorber is reported. The shortest pulse duration of -500 ns with the central wavelength of 2041 nm is obtained at the pump power of 7.4 W, corresponding to the pulse energy of 3.5 μd at repetition rate of 65 kHz.     

基于腔面非注入区的半导体激光器的热特性分析

利用Ansys有限元分析软件模拟了宽条形激光器腔面在不同生热率条件下对有源区温度的影响,并对带有腔面非注入区的激光器结构进行了热分析,比较了不同长度的非注入区结构的器件的温度特性。腔面的温升对器件可靠性影响极大,计算结果表明随着非注入区宽度的增加,芯片前腔面有源区的温度明显降低。结果为采用非注入区结构提高COD阈值功率提供了设计参考。