Facile and versatile synthesis of rod‐coil poly(3‐hexylthiophene)‐based block copolymers by nitroxide‐mediated radical polymerization

A well‐defined and monofunctional poly(3‐hexylthiophene)‐based (P3HT) macroinitiator has been obtained through a clean, simple, and an efficient multistep synthesis process. The macroinitiator is obtained via intermolecular radical 1,2‐addition onto an ω‐acrylate‐terminated P3HT macromonomer. In a second step, well‐defined rod‐coil block copolymers were obtained by nitroxide‐mediated radical polymerization (NMRP) using the so‐called Blocbuilder^®. The polymerization was found to be controlled with various monomers such as styrene, isoprene, 4‐vinylpyridine, or methyl acrylate. This process constitutes a very promising way to obtain versatile and clean materials for organic electronics. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Metal catalyst-free amination of meso-bromoporphyrins: an entry to supramolecular porphyrinoid frameworks

meso-Bromoporphyrins can be conveniently substituted by primary and secondary amines in a metal catalyst-free reaction which gives access to a large variety of meso-N-substituted derivatives. In some cases, considerable acceleration of this amination can be effected under microwave irradiation. The amino anchor on the porphyrin skeleton is useful for constructing novel self-assembling porphyrinoids as demonstrated by a single crystal X-ray analysis as well as stationary absorption and fluorescence spectroscopies.     

Dilational rheology of an air–water interface functionalized by biomolecules: the role of surface diffusion

As an attempt to develop a sensitive device for biomolecule detection, a micromechanical methodology based on the rheological change of an air–water interface is put forward (Berthier and Davoust, CEA/CNRS patent, PCT International Application WO 2003/080209 A3, 2003). Capillary waves induced from the vertical electrodynamic vibration of a brimful cylindrical tank filled with water stand as a good way to identify dilational elasticity and viscosity of an aging interface. Before, we were interested of the fact that complex wave number and the frequency of waves are obtained through an optical technique, which allows us to accurately recognize the whole interface geometry. These two parameters, a modeling based on a dispersion relation (Lucassen-Reynders and Lucassen, Adv Colloid Interface Sci, 2:347, 1969) and the surface mass transport equation, are jointly used to identify the surface diffusivity and the dilational rheology of the interface for a nonsoluble biochemical surfactant. Preliminary results obtained from a water surface functionalized by DNA, thanks to a lipidic monolayer, demonstrate the capabilities of the proposed methodology. The sensitivity of dilational rheology and the surface diffusivity on DNA adsorption on lipids is made evident.This paper was presented at the Annual Meeting of the European Society of Rheology, Grenoble, April 2005.     

Light‐Driven Reversible Alignment Switching of Liquid Crystals Enabled by Azo Thiol Grafted Gold Nanoparticles

Stimuli‐directed alignment control of liquid crystals (LCs) with desired molecular orientation is currently in the limelight for the development of smart functional materials and devices. Here, photoresponsive azo thiol (AzoSH) was grafted onto gold nanoparticles (GNPs). The resulting hybrid GNPs were able to homogeneously mix with a commercially available nematic LC host, as evidenced by Cryo‐TEM. Interestingly, the LC nanocomposites were found to undergo reversible alignment transition upon light irradiation as a consequence of the trans–cis photoisomerization of the azo groups on the GNP surface. LC molecules in either planar or bare glass cells were able to change their alignment to vertical upon UV irradiation, while the vertically aligned LC molecules returned to the planar or random orientation under visible irradiation. Neither the azo thiol molecules nor the unfunctionalized GNPs alone promoted the alignment of the LC molecules in the system upon light irradiation. The photoinduced vertical alignment without applied electric or magnetic field was very stable over time and with respect to temperature. Furthermore, an optically switchable device based on the photostimulated reversible alignment control of LCs was demonstrated.     

ortho‐, meta‐, and para‐Dihydroindenofluorene Derivatives as Host Materials for Phosphorescent OLEDs

This work reports the first structure–properties relationship study of ortho [2,1‐c]‐, meta [1,2‐a]‐, and para [1,2‐b]dihydroindenofluorenes, highlighting the influence of bridge rigidification on the electronic properties. This study has made it possible to devise an extended π‐conjugated molecule with both a high triplet state energy level and excellent thermal and morphological stability. As a proof of concept, dihydroindenofluorenes were used as the host in sky‐blue phosphorescent organic light‐emitting diodes (PhOLEDs) w ith high performance.     

Liquid chromatography–high-resolution mass spectrometry for identifying aqueous chlordecone hydrate dechlorinated transformation products formed by reaction with zero-valent iron

Chlordecone (CLD) is a persistent toxic chlorinated pesticide which contaminates different ecosystems in French West Indies. A soil remediation process including zero-valent iron (ZVI) has produced promising results but failed to completely degrade CLD, and the analytical procedures used yielded little information on the transformation products. To fill these gaps, dechlorination of aqueous CLD by micrometric particles of ZVI has been investigated. Aliquots of water with 25% (v/v) of acetone spiked with 100 ppm CLD were taken at different times during a 30-day ZVI treatment and directly analysed by ultra-high-performance liquid chromatography in negative electrospray ionisation mode. CLD has been totally transformed after 14 days into 14 dechlorinated degradation products, including 9 isomeric compounds. The maximum chloride concentrations appearing in the medium represent 44% of that which would result from total dechlorination of CLD. The CLD transformation products identified by accurate mass measurements on an ultra-high-resolution Q-TOF mass spectrometer (Q-TOF-MS) were C₁₀H₃Cl₉O₂, C₁₀H₄Cl₈O₂, C₁₀H₅Cl₇O₂, C₁₀H₆Cl₆O₂ and C₁₀H₇Cl₅O₂. The results show the interest of LC-Q-TOF-MS for identifying transformation products of organic contaminants, and the effectiveness of micrometric ZVI particles to totally transform CLD into less chlorinated products.     

Electroactive planar waveguide studies of Ru(bpy)3(2+) intercalated in a thin clay film: I. Transport and electrochemical phenomena

Electroactive planar waveguide (EAPW) instrumentation was used to perform potential modulated absorbance (PMA) experiments at indium tin oxide (ITO) electrodes coated with 0-, 300-, 800-, and 1200-nm-thick SWy-1 montmorillonite clay. PMA experiments performed at low potential modulation monitor mass transport events within 100 nm of the ITO surface and, thus, when used in conjunction with cyclic voltammetry (CV), can elucidate charge transport mechanisms. The data show that at very thin films electron transfer is controlled by electron hopping (sensitive to the anion species in the electrolyte) in an adsorbed Ru(bpy)(3)(2+) layer. As the thickness of the clay film grows, electron transfer may become controlled by mass transfer of Ru(bpy)(3)(2+) within the clay film to and from the electrode surface, a mechanism that is affected by the swelling of the film. Film swelling is controlled by the cation of the electrolyte. Films loaded with Ru(bpy)(3)(2+) while being subjected to evanescent wave stimulation demonstrate a large hydrophobic layer. The growth of the hydrophobic layer is attributed to the formation of Ru(bpy)(3)(2+*), which has negative charge located at the periphery of the molecule enhancing clay/complex repulsion. The results suggest that the structure of the film and the mechanism of charge transport can be rationally controlled. Simultaneous measurements of the ingress of Ru(bpy)(3)(2+) into the clay film by CV and PMA provide a means to determine the diffusion coefficient of the complex.     

A new method to analyze copolymer based superplasticizer traces in cement leachates

Enhancing the flowing properties of fresh concrete is a crucial step for cement based materials users. This is done by adding polymeric admixtures. Such additives have enabled to improve final mechanicals properties and the development of new materials like high performance or self compacting concrete. Like this, the superplasticizers are used in almost cement based materials, in particular for concrete structures that can have a potential interaction with drinking water. It is then essential to have suitable detection techniques to assess whether these organic compounds are dissolved in water after a leaching process or not. The main constituent of the last generation superplasticizer is a PolyCarboxylate-Ester copolymer (PCE), in addition this organic admixture contains polyethylene oxide (free PEO) which constitutes a synthesis residue. Numerous analytical methods are available to characterize superplasticizer content. Although these techniques work well, they do not bring suitable detection threshold to analyze superplasticizer traces in solution with high mineral content such as leachates of hardened cement based materials formulated with superplasticizers. Moreover those techniques do not enable to distinguish free PEO from PCE in the superplasticizer.Here we discuss two highly sensitive analytical methods based on mass spectrometry suitable to perform a rapid detection of superplasticizer compounds traces in CEM I cement paste leachates: MALDI-TOF mass spectrometry, is used to determine the free PEO content in the leachate. However, industrial copolymers (such as PCE) are characterized by high molecular weight and polymolecular index. These two parameters lead to limitation concerning analysis of copolymers by MALDI-TOFMS. In this study, we demonstrate how pyrolysis and a Thermally assisted Hydrolysis/Methylation coupled with a triple-quadrupole mass spectrometer, provides good results for the detection of PCE copolymer traces in CEM I cement paste leachates.     

Violet-to-blue tunable emission of aryl-substituted dispirofluorene-indenofluorene isomers by conformationally-controllable intramolecular excimer formation

Two series of DiSpiroFluorene-IndenoFluorene (DSF-IF) positional isomers, namely dispiro[2,7-diarylfluorene-9',6,9',12-indeno[1,2-b]fluorenes], (1,2-b)-DSF-IFs 1 and dispiro[2,7-diarylfluorene-9',6,9',12-indeno[2,1-a]fluorenes], (2,1-a)-DSF-IFs 2 have been synthesized. These violet-to-blue fluorescent emitters possess a 3π-2spiro architecture, which combines via two spiro links two different indenofluorene cores, that is, (1,2-b)-IF or (2,1-a)-IF and 2,7-substituted-diaryl-fluorene units. Due to their different geometric profiles, the two families of positional isomers present drastically different properties. The marked difference observed between the properties of (1,2-b)-DSF-IF (1) and (2,1-a)-DSF-IF (2) is discussed in terms of intramolecular π-π interactions occurring in (2,1-a)-DSF-IF (2) leading to conformationally-controllable intramolecular excimer formation. Indeed, the original geometry of the (2,1-a)-DSF-IF (2) family, with face-to-face "aryl-fluorene-aryl" moieties, leads to remarkable excimer emission through intramolecular π-π interactions in the excited state. Furthermore, the emission wavelengths can be gradually modulated by the control of the steric hindrance between the adjacent substituted phenyl rings. Thus, through a comparative and detailed study of the (1)H NMR, electrochemical and photophysical properties of DSF-IFs 1 and 2, we have evidenced the intramolecular π-π interactions occurring between the two "aryl-fluorene-aryl" moieties in the ground state and in the excited state. These properties have been finally correlated to the spectacular conformational change modeled by density functional theory (DFT) calculations. Indeed, the two "aryl-fluorene-aryl" moieties switch from a staggered conformation in the ground state to an eclipsed conformation in the first excited state.