REALISIS: a medicinal chemistry-oriented reagent selection, library design, and profiling platform

REALISIS is a software system for reagent selection, library design, and profiling, developed to fit the workflow of bench chemists and medicinal chemists. Designed to be portable, the software offers a comprehensive graphical user interface and rapid, integrated functionalities required for reagent retrieval and filtering, product enumeration, and library profiling. REALISIS is component-based, consisting of four main modules: reagent searching; reagent filtering; library enumeration; and library profiling. Each module allows the chemist to access specific functionalities and diverse filtering and profiling mechanisms. By implementing the entire process of reagent selection, library design, and profiling and by integrating all the necessary functionalities for this process, REALISIS cuts the time required to design combinatorial and noncombinatorial libraries from several days to a few hours.     

New dehydration in the pyrrolo[1,2–6-b]isoquinoline series. Preparation and structural identification of 3,5-dihydrobenz[f]indolizin-3-one

3,5-Dihydrobenz[f]indolizin-3-one was prepared by a novel dehydration reaction involving the heating of 1,2,3,5,10,10a-hexahydro[f]indolizine-3,10-dione with polyphosphoric acid. The structure of this new compound was established by X-ray crystallography, by nmr spectroscopy and by reduction to the known products 1,2,3,5-tetrahydrobenz[f]indolizin-3-one and 1,2,3,5,10,10a-hexahydrobenz[f]indolizin-3-one.     

CsMoO2(HO3P–CH2–PO3): a new metallodiphosphonate with a hybrid framework

Crystals of caesium molybdeno­methyl­enedi­phospho­nate, [CsMoO₂(CH₃O₆P₂)], were hydro­thermally synthesized at 473 K. The monoclinic structure, as determined from single‐crystal X‐ray diffraction, is two‐dimensional and consists of stacked mixed layers of corner‐sharing tetrahedral di­phosphon­ate groups and MoO₆ octahedra, between which Cs⁺ cations are intercalated.     

Aldol condensations over reconstructed Mg-Al hydrotalcites: structure-activity relationships related to the rehydration method

Two different rehydration procedures in the liquid or gas phase have been applied to reconstruct mixed oxides derived from calcined hydrotalcite-like materials to be used as catalysts for aldol condensation reactions. The as-synthesized hydrotalcite, its decomposition product, as well as the reconstructed solids upon rehydration were characterized by XRD, N(2) adsorption, He pycnometry, FTIR, SEM, TEM, (27)Al MAS-NMR and CO(2)-TPD (TPD=temperature-programmed desorption). Compared to the Mg-Al mixed oxide rehydrated in the gas phase (HT-rg), that rehydrated in the liquid phase (HT-rl) exhibits a superior catalytic performance with respect to the aldol condensation of citral with ketones to yield pseudoionones and in the self-aldolization of acetone. The textural properties of HT-rl and HT-rg differ strongly and determine the catalytic behavior. A memory effect led to a higher degree of reconstruction of the lamellar structure when the mixed oxide was rehydrated in the gas phase rather than in the liquid phase, although liquid-phase rehydration under fast stirring produced a surface area that was 26 times greater. This contrasts to typical statements in the literature claiming a higher degree of reconstruction in the presence of large amounts of water in the medium. CO(2)-TPD shows that the number of OH(-) groups and their nature are very similar in HT-rg and HT-rl, and cannot explain the markedly different catalytic behavior. Accordingly, only a small fraction of the available basic sites in the rehydrated samples is active in liquid-phase aldol condensations. Our results support the model in which only basic sites near the edges of the hydrotalcite platelets are partaking in aldol reactions. Based on this, reconstructed materials with small crystallites (produced by exfoliation during mechanical stirring), that is, possessing a high external surface area, are beneficial in the reactions compared to larger crystals with a high degree of intraplatelet porosity.     

New developments in the Pd-catalysed cyclisation-coupling reaction of alkene-containing carbonucleophiles with organic halides (and triflates). The first examples of asymmetric catalysis.

The results of our preliminary investigations directed toward asymmetric catalysis of the cyclocarbopalladation of alkenes bearing a proximate nucleophile with organic halides (or triflates) are disclosed. A series of bidentate phosphine ligands were evaluated in intramolecular versions of this reaction using (E)-2-[7-(2-bromophenyl)-hept-4-enyl]-malonic acid dimethyl ester (1) and (Z)-2-[7-(2-trifluoromethanesulfonyloxy-phenyl)-hept-4-enyl]-malonic acid dimethyl ester (9) as model substrates. The highest enantioselective induction was obtained with aryl triflate 9 which produced the corresponding cyclopentylindane as a single diastereomer in 54% chemical yield and 43% ee by using PdCl₂[S-(−)-TolBINAP] as chiral catalyst and K₂CO₃ as base.     

Chemical and rheological investigations of the sol-gel transition in organically-modified siloxanes

Ormosils are well-known organic-inorganic sol-gel derived materials also called heteropolysiloxanes. This paper presents two basic heteropolysiloxane structures where the organic part is either a short organic chain bridging two silicon atoms for the first material or an organic polymer backbone for the second. Their synthesis is detailed and a variety of experimental techniques (IR, ¹³C and ²⁹Si NMR and CP-MAS NMR, GPC) have been employed to investigate the chemical structure of these new materials. Their mechanical properties, more precisely their viscoelastic behaviour, have been evaluated using dynamic rheological techniques. The storage and loss moduli have been followed during the sol-gel transition at fixed and variable oscillation frequencies. The results have been correlated to the ²⁹Si CP-MAS NMR informations concerning the network polycondensation and compared to a pure inorganic sol-gel material prepared from tetraethoxysilane.     

Evaluation of an accurate calibration and spectral standardization procedure for Raman spectroscopy

Due to modern developments Raman spectroscopy has evolved into a fast vibrational technique. Detailed fingerprints in combination with non-destructivity and minimal sample preparation has allowed the construction of reference libraries in a variety of research fields. Long-term stability and comparability are important characteristics when developing reference libraries. In addition, small shifts in highly similar spectra of different samples may limit the full potential of Raman spectroscopy. Since libraries often contain a large number of different and/or highly similar spectra, it is important that each data point in all the spectra corresponds to the exact Raman wavenumber. This is often not the case, due to shifts in optical pathway and/or shifts in laser wavelength. This paper describes a complete calibration protocol (wavelength and intensity) and evaluates the procedure for both short and long term stability, by means of 60 randomly selected measurement sessions spread over a period of nine months. A two-step standardization procedure is proposed to deal with spectral shifts.     

Preparation of amphiphilic polyisobutylenes-b-polyethylenamines by mannich reaction. I. Synthesis and characterization of α-phenololigoisobutylenes

The cationic polymerization of isobutylene initiated by 4-(2-hydroxy-2-propyl)phenol/BCl₃ system results mainly in α-phenol-ω-chlorooligoisobutylene; however p-(2-chloro-2,4-dimethyl-4-pentyl)phenol is present in all cases. α-Methyl-ω-chlorooligoisobutylene is formed only when the temperature is below?50°C; it results from initiation by the phenol/BCl₃ system. Thermal dehydrochlorination of α-phenol-ω-chlorooligoisobutylene is quantitative and leads to a mixture of isomeric ω-unsaturated oligoisobutylenes. α-Methyl-ω-phenololigoisobutylene is prepared by the Friedel—Crafts reaction between industrial unsaturated oligoisobutylene and phenol in the presence of SnCl₄ at ?30°C; the reaction is quantitative between ?50 and ?30°C degradation takes place. © 1993 John Wiley & Sons, Inc.     

FeCp]+-induced hexafunctionalization of hexamethylbenzene with dendrons for the direct synthesis of redox-active iron-centered metallodendrimers

Phenol tri- and nonaallyl dendrons (3 and 7, respectively) were functionalized at the focal position to give the new triallyl dendrons 4 and 6 and the nonaallyl dendrons 11 and 13 that contain a iodoalkyl or a bromobenzyl termini. All these dendrons were used for the [FeCp]+-induced hexafunctionalization of hexamethylbenzene in [FeCp(eta6-C6Me6)][PF6] (1) under mild conditions in the presence of KOH. These reactions directly yielded the 18-allyl and 54-allyl dendrimers 9, 10, and 14 with a [FeCp(eta6-arene)]+ unit located at the dendrimer core. Cyclic voltammetry studies were recorded in THF and DMF with these metallodendrimers and compared with those of analogous dendrimers or complexes of smaller size that contain a [FeCp(eta6-arene)]+ unit at the core. The decreased rate of heterogeneous electron transfer when the dendritic size increases first disclosed by Diederich and Gross is confirmed. The variation of the redox potential of the Fe(II/I) redox system with increasing dendritic size is negligible even in a solvent of high dielectric constant such as DMF. This trend is attributed to fact that the involved "redox" orbital is buried on the metal center, well protected by the shell of alkyl chains (electron-reservoir nature), unlike in ferrocene. The chemical irreversibility increases in THF as the dendrimer size increases, due to more facile ligand substitution with THF at the 19-electron level when the chain bulk increases.     

Energy filtered transmission electron microscopy for the physico-chemical characterization of aquatic submicron colloids

A combination of energy filtered transmission electron microscopic (EF-TEM) procedures is proposed for the non-perturbing physico-chemical characterization of submicron mineral and organic colloids in aquatic systems. Synthetic hematite microparticles and xanthan polysaccharides were used as well-characterized model colloids in order to determine the optimum EF-TEM analysis conditions. In this paper, it is demonstrated that (i) our model colloids are morphologically representative of naturally occurring mineral/organic associations, (ii) EF-TEM allows the detection of fine xanthan ultrastructures without artefacts of conventional staining methods and (iii) submicron hematite particles can be specifically visualized and spectrometrically measured by EF-TEM within a hematite/xanthan mixture. This EF-TEM procedure appears to be appropriate for the characterization of real aquatic samples.