Nanoplatelet-based reconstructed hydrotalcites: towards more efficient solid base catalysts in aldol condensations

Rehydration of Mg-Al hydrotalcite in the liquid phase using ultrasounds or a high stirring speed leads to nanoplatelets with surface areas of 400 m(2) g(-1), displaying catalytic activities in aldol condensations up to 8 times higher than the best catalytic system reported in the literature.     

Effect of rehydration conditions on the catalytic activity of hydrotalcite-derived Mg-Al oxides in aldolization of acetone

Summary Mg-Al hydrotalcite-derived oxides with a varying Mg/Al molar ratio, ranging from 2.6 to 3.2, were rehydrated in the vapor phase at different temperatures (20-90°C). The catalytic performance of the materials obtained was studied in the aldol condensation of acetone. The initial activity of the rehydrated catalysts depended strongly on the Mg/Al molar ratio and the activation temperature. It was found that the re-arrangement of active sites, leading to the reconstruction of hydrotalcite-like phase, occurred during the catalytic test.     

Memory effect of activated Mg-Al hydrotalcite: in situ XRD studies during decomposition and gas-phase reconstruction

The thermal decomposition of Mg-Al hydrotalcite and the subsequent reconstruction of the decomposed products in the presence of water vapor (2 vol. % H(2)O in N(2)) have been investigated by in situ XRD. Thermographic analysis and temperature-programmed desorption MS results complemented the diffraction data. Valuable mechanistic and kinetic insights into these processes, which are of prime importance for optimal activation of this type of material for catalytic applications, were obtained. Hydrotalcite decomposition to the mixed oxide proceeds via formation at 423-473 K of an intermediate phase, consisting of a highly disordered, dehydrated, layered structure. The latter evolves by removal of interlayer water on heating, causing a shrinking of the interlayer space (it is up to 45 % smaller than in the as-synthesized hydrotalcite). Above 623 K, Mg(Al)O(x) oxide with the periclase structure is formed. Reversion of the intermediate dehydrated structure to hydrotalcite upon contact with water vapor is complete and very fast at room temperature. Recovery of hydrotalcite from the oxide calcined at 723 K is two orders of magnitude slower than rehydration of the intermediate layered structure and one order of magnitude slower than the typically practiced liquid-phase reconstruction. In contrast to the decomposition, the reconstruction mechanism does not involve an intermediate phase. The gas-phase rehydration and reconstruction was interrupted above 303 K. This is attributed to the poor wetting of the surface of the decomposed materials induced by hampered H(2)O adsorption above room temperature at the water vapor pressure applied. The Avrami-Erofe'ev model describes the reconstruction kinetics well.     

Liquid-phase catalytic processing of biomass-derived oxygenated hydrocarbons to fuels and chemicals

Biomass has the potential to serve as a sustainable source of energy and organic carbon for our industrialized society. The focus of this Review is to present an overview of chemical catalytic transformations of biomass-derived oxygenated feedstocks (primarily sugars and sugar-alcohols) in the liquid phase to value-added chemicals and fuels, with specific examples emphasizing the development of catalytic processes based on an understanding of the fundamental reaction chemistry. The key reactions involved in the processing of biomass are hydrolysis, dehydration, isomerization, aldol condensation, reforming, hydrogenation, and oxidation. Further, it is discussed how ideas based on fundamental chemical and catalytic concepts lead to strategies for the control of reaction pathways and process conditions to produce H(2)/CO(2) or H(2)/CO gas mixtures by aqueous-phase reforming, to produce furan compounds by selective dehydration of carbohydrates, and to produce liquid alkanes by the combination of aldol condensation and dehydration/hydrogenation processes.     

Acid catalyzed aldol condensation in the gas phase

The gas phase reaction of acetaldehyde with a Brønsted acid in a chemical ionization source yields protonated crotonaldehyde, as shown by its collisional activation mass spectrum. This is thus analogous to the well known aldol condensation in solution, in which the initial aldol adduct loses water to yield crotonaldehyde. The possibility of a common mechanism for the gas phase and solution reactions is discussed.     

Activity of Basic Catalysts in the Meerwein-Ponndorf-Verley Reaction of Benzaldehyde with Ethanol

The Meerwein-Ponndorf-Verley (MPV) reaction of benzaldehyde with ethanol in the liquid phase in the presence of basic catalysts consisting of magnesium oxide, calcium oxide, and mixed oxides obtained by calcination of layered double hydroxides, was studied. The catalysts were characterized using various techniques including X-ray diffraction and gas adsorption (viz nitrogen physisorption to determine textural properties and carbon dioxide chemisorption to elucidate surface basic properties). The catalyst consisting of calcium oxide, which was that possessing the highest density of basic sites, was found to be the most active in the process; the MPV reaction was accompanied by two other, competing reactions (viz aldol condensation and the Tishchenko cross-reaction). The MPV reaction of benzaldehyde with other alcohols was also examined, the highest conversion being obtained with secondary alcohols as hydrogen sources. Copyright 2001 Academic Press.     

On the nature and accessibility of the Brønsted-base sites in activated hydrotalcite catalysts

Base catalysis is of importance for organic synthesis in general and fine chemicals manufacture in particular. Activated hydrotalcites have recently received a great deal of attention as solid base catalysts; however, no systematic work on the nature of their active sites has been published up till now. In this work two different methods have been applied to activate Mg-Al hydrotalcites to obtain Br?nsted-base catalysts for liquid-phase condensation reactions. Activation via thermal treatment followed by rehydration (HT-reh) resulted in irregularly stacked platelets ( approximately 60 nm), whereas the sample activated via aqueous ion-exchange (HT-exc) preserved its original hexagonal hydrotalcite platelets ( approximately 100 nm). The specific activity for the self-condensation of acetone of HT-reh was over 10 times that of HT-exc. The enthalpy of CO2 adsorption on the activated hydrotalcites determined with calorimetry to gain insight into the strength of the basic sites showed very similar values. IR spectra of adsorbed CDCl3 as probe molecule on the differently activated samples revealed large differences in adsorbed amounts, but again the strength of the basic sites appeared to be the same. These results point to steric hindrance for the substrate molecules as the main factor determining differences in catalytic activity. The high accessibility of Br?nsted-base sites in HT-reh is proposed to involve a distorted edge structure of the platelets. The edge structure of exchanged samples could be distorted too, either by exchange under reflux conditions or under ultrasonic treatment. In line with the proposed model, the distorted exchanged samples displayed a much higher catalytic activity than HT-exc.     

Facile Aldol Reaction Between Unmodified Aldehydes and Ketones in Bronsted Acid Ionic Liquids

A series of condensation reactions of unmodified ketones and aromatic aldehydes to prepare α,β-unsaturated carbonyl compounds by means of Aldol reactions in Bronsted acid ionic liquids(BAILs)was explored.1-Butyl-3-methylimidazolium hydrogen sulphate(BMImHSO4)acting as an effective media and catalyst in aldol reactions was compared with other BAILs,with the advantages of high conversion and selectivity.The product was easily isolated and the left ionic liquid can be readily recovered and reused at least 3 times with almost the same efficiency.The scope and limitation of the present method were explored and the possible catalytic mechanism was speculated.     

Review of the aldol reaction

Aldol condensation is an important synthetic method widely used in organic synthesis. Development of catalytic methods that avoids the production of stoichiometric by-products while maintaining high levels of control available from stoichiometric processes provides an atom-economical alternative for these important transformations. Indeed, numerous catalysts for the aldol reaction have been reported in recent years, including enzymes, catalytic antibodies, organometals, organocatalysts, and small molecules. The direct aldol reaction is the most important reaction employed by synthetic chemists and is common in nature. Recently, various Lewis acids have been examined as catalysts for aldol reactions, but aldol condensation in a micellar medium has not been studied in detail so far. Because of stronger environmental concerns, organic reactions in green media, especially in water, have attracted more attention. It is believed that micelles act as nano reactors to enhance the reaction rates and give very good to excellent yields of end products.     

手性胺有机小分子不对称催化的研究进展

扼要综述了有机手性胺催化在过去十年中的发展,列举了具有代表性的活化模式(如仲胺催化的活化模式)、催化剂(如手性叔胺有机催化剂)和反应类型(如分子内Aldol环化反应,分子间Aldol缩合反应,Lewis酸活化羰基化合物机制,手性胺催化等),并提出了该领域新的研究方向.手性胺不对称催化在手性合成中具有广阔的应用前景.     

Switching the reactivity of dihydrothiopyran-4-one with aldehydes by aqueous organocatalysis: Baylis-Hillman, aldol, or aldol condensation reactions

An aqueous medium containing catalytic amounts of a tertiary amine was employed to direct the chemoselectivity of the reaction of aldehydes with 1a. With DBU, 2 was formed at room temperature as a rare exemplary of Baylis-Hillman reactions in heterocyclic enones. DABCO alternated the pathway toward an aldol reaction to form syn/anti mixtures of 3 with the syn isomers being the major products. With Et(3)N, aldol condensation dominated.     

Pt- and Pd-containing nanodiamonds in hydrogenation and hydroamination reactions

The catalytic activity of platinum- and palladium-containing nanodiamonds has been investigated in liquid-phase nitrobenzene, allyl alcohol, and cyclohexene hydrogenation and propanal hydroamination with 4-aminobenzoic acid as model reactions. The catalysts suggested are significantly more active than commercial Pd/C. The catalysts with a low metal weight content are the most effective in liquid phase catalytic hydrogenation.     

Dibutyltin dimethoxide-catalyzed aldol reaction of enol trichloroacetates

A catalytic aldol condensation of aldehydes with enol trichloroacetates was achieved using dibutyltin dimethoxide as a novel catalyst in a mixed solvent consisting of THF and MeOH. Various β-hydroxy ketones were diastereoselectively obtained in high yields up to 99%.     

Porous magnesium carboxylate framework: synthesis, X-ray crystal structure, gas adsorption property and heterogeneous catalytic aldol condensation reaction

A new three-dimensional alkaline-earth metal-organic framework (MOF) compound, [Mg(Pdc)(H(2)O)](n) (1) (H(2)Pdc = pyridine-2,5-dicarboxylic acid), has been synthesized and structurally characterized by single crystal X-ray diffraction analysis. Compound 1 features a 3D porous framework afforded by the Mg(2)-diad centers through formation of interconnected chair like structural motifs. A nitrogen adsorption study confirms the microporosity of compound 1 with a BET surface area of 211 ± 12 m(2) g(-1). Upon dehydration, the BET surface area of 1 is enhanced to a value of 463 ± 36 m(2) g(-1) due to removal of coordinated water molecule. After rehydration, the compound reverts to its original form as evidenced by powder X-ray diffraction and IR spectroscopic analysis and N(2) sorption measurement. Compound 1 retains its pore structure with a variable BET surface area in several cycles of dehydration and rehydration processes indicating robustness of the framework in [Mg(Pdc)(H(2)O)](n) (1). Compound 1 catalyzes the aldol condensation reactions of various aromatic aldehydes with acetone and cyclohexanone in heterogeneous conditions. Notably, the catalytic activity of the compound is enhanced upon dehydration. The catalyst can be recycled and reused several times without significant loss of activity.     

手性季铵盐类相转移催化剂的新进展

叙述了手性季铵盐类相转移催化剂在不对称催化反应（包括活性亚甲基的烷基 化、Michael加成、双键的环氧化、Darzens缩合、氮杂环丙烷的合成、羟醛缩合以 及Horner-Wadsworth-Emmons反应）中应用的新进展。     

Direct beta-alkylation of secondary alcohols with primary alcohols catalyzed by a CpIr complex

A new catalytic system for beta-alkylation of secondary alcohols has been developed. In the presence of [CpIrCl(2)](2) (Cp = pentamethylcyclopentadienyl) catalyst and base, the reactions of various secondary alcohols with primary alcohols give beta-alkylated higher alcohols in good to excellent yields without any hydrogen acceptor or hydrogen donor. This reaction proceeds via successive hydrogen-transfer reactions and aldol condensation. [reaction: see text]     

Preparation of C9-aldehyde via aldol condensation reactions in ionic liquid media

C9-aldehyde has been prepared via aldol condensation reactions in ionic liquid media; catalyst investigation showed enhanced product selectivity for the desired aldehyde in ionic liquid media than in conventional solvent systems.     

含钯类水滑石衍生复合氧化物Pd/M3AlO(M=Mg,Co, Ni,Cu, Zn)催化剂上氯苯的催化氧化

采用共沉淀法制备了系列含Pd类水滑石材料, 类水滑石基体为M3Al-HT (M=Mg, Co, Ni, Cu, Zn), 经焙烧制备出含Pd类水滑石衍生复合氧化物催化剂. 通过X射线衍射(XRD), 热重-差热分析(TG-DTG), H2程序升温还原(H2-TPR), O2程序升温脱附(O2-TPD)和N2吸脱附等表征技术手段研究了不同二价金属元素对含Pd类水滑石衍生复合氧化物催化剂物理化学性质及其对挥发性有机污染物氯苯催化氧化性能的影响. XRD和TG-DTG结果表明, 不同二价金属元素, 除Cu外, 都能形成类水滑石层状结构, Pd在不同类水滑石前驱物中均能良好分散. 不同的二价金属元素对催化剂性能的影响不同, 其中Pd/Co3AlO催化剂表现出最高的氯苯催化氧化活性, 其起燃温度和全转化温度分别为182和283 ℃. H2-TPR和O2-TPD测试表明, Pd和类水滑石衍生复合氧化物存在着协同作用, Pd的引入促进了复合氧化物的还原, 从而影响氧化物的氧化还原性能. Pd/M3AlO系列催化剂的活性主要受催化剂的氧化还原性能及其表面活性氧物种的影响.     

Environmentally friendly one-pot synthesis of alpha-alkylated nitriles using hydrotalcite-supported metal species as multifunctional solid catalysts

A ruthenium-grafted hydrotalcite (Ru/HT) and hydrotalcite-supported palladium nanoparticles (Pd(nano)/HT) are easily prepared by treating basic layered double hydroxide, hydrotalcite (HT, Mg(6)Al(2)(OH)(16)CO(3)) with aqueous RuCl(3)n H(2)O and K(2)[PdCl(4)] solutions, respectively, using surface impregnation methods. Analysis by means of X-ray diffraction, and energy-dispersive X-ray, electron paramagnetic resonance, and X-ray absorption fine structure spectroscopies proves that a monomeric Ru(IV) species is grafted onto the surface of the HT. Meanwhile, after reduction of a surface-isolated Pd(II) species, highly dispersed Pd nanoclusters with a mean diameter of about 70 A is observed on the Pd(nano)/HT surface by transmission electron microscopy analysis. These hydrotalcite-supported metal catalysts can effectively promote alpha-alkylation reactions of various nitriles with primary alcohols or carbonyl compounds through tandem reactions consisting of metal-catalyzed oxidation and reduction, and an aldol reaction promoted by the base sites of the HT. In these catalytic alpha-alkylations, homogeneous bases are unnecessary and the only by-product is water. Additionally, these catalyst systems are applicable to one-pot syntheses of glutaronitrile derivatives.     

Direct Asymmetric Aldol Type Reaction with Ethyl Diazoacetate: Stereoselective Synthesis of α, β-Dihydroxy Esters

Enantioselective aldol condensation under catalytic condition remains a challenging task in modern organic synthesis, and numerous efforts have been directed to this area. In particular, the direct catalytic asymmetric aldol reaction is very attractive considering the requirement of atom efficiency. This has been studied only recently, and several very practical processes have been developed. We have recently initiated a study on the direct asymmetric aldol type reaction with ethyl diazoacetate as nucleophile. Moderate enantioselectivities (65% ～91% ee ) were achieved in the condensation of aldehydes with ethyl diazoacetate catalyzed by the chiral complex of BINOL derivatives-Zr (OBu- t )4. [1]