Dielectric Spectroscopy Analysis of Liquid Crystals Recovered from End-of-Life Liquid Crystal Displays

In the present work, the dielectric properties of recycled liquid crystals (LCs) (non-purified, purified, and doped with diamond nanoparticles at 0.05, 0.1, and 0.2 wt%) were investigated. The studied LC mixtures were obtained from industrial recycling of end-of-life LC displays presenting mainly nematic phases. Dielectric measurements were carried out at room temperature on a frequency range from 0.1 to 10⁶ Hz using an impedance analyzer. The amplitude of the oscillating voltage was fixed at 1 V using cells with homogeneous and homeotropic alignments. Results show that the dielectric anisotropy of all purified samples presents positive values and decreases after the addition of diamond nanoparticles to the LC mixtures. DC conductivity values were obtained by applying the universal law of dielectric response proposed by Jonscher. In addition, conductivity of the doped LC mixtures is lower than that of the undoped and non-purified LC.     

Line tension at fluid membrane domain boundaries measured by micropipette aspiration

Line tension is a determinant of fluid phase domain formation kinetics and morphology in lipid bilayer membranes, which are models for biological membrane heterogeneity. We describe the first direct measurement of this line tension by micropipette aspiration. Our data are analyzed with a model that does not rely on independently measured (and composition dependent) secondary parameters, such as bending stiffness or membrane viscosities. Line tension is strongly composition dependent and decreases towards a critical consolute point in a quasiternary room temperature phase diagram.     

Porphyrins and Polyoxometalate Scaffolds

Polyoxometalates (POMs) can act as unique reservoirs for multiple electron transfers. As POMs display only weak absorption in the visible spectrum, they can be associated with chromophores such as porphyrins and porphyrin antennae. In this Minireview, the research dedicated to the combination of porphyrins and polyoxometalates is put in context and the state of the art identifying the challenges addressed in the optimization of hybrid materials for applications is detailed.     

Self-assembled alkanethiol structures on gold: A further insight into the origins of structural rearrangement phenomena

Self-assembled structures of alkanethiols that have been deposited on gold from ethanolic solutions are susceptible to both chemical and physical changes: ethanol provides a medium for the formation of S-alkyl hydrogen thiocarbonates and related compounds via reaction with dissolved, atmospheric, CO₂. Deposition from ethanolic solutions results in multilayered structures incorporating these compounds, which at room temperature are susceptible to time-dependent structural rearrangement and molecular migration.     

Design of metal oxide nanoparticles: Control of size,shape, crystalline structure and functionalization by aqueous chemistry

The aim of this paper is to show that a very simple but well controlled chemistry in an aqueous medium allows one to efficiently control the main characteristics of oxide nanoparticles. Examples concerning titania, alumina, iron and manganese oxides are discussed to illustrate various effects on the control of size, shape and structure of nanoparticles. Some examples of functionalization of these particles are also illustrated. Experimental data, procedures and detailed references can be found in the cited literature.     

Nucleation and growth rates of poly(L-lactic acid) microparticles during precipitation with a compressed-fluid antisolvent

We measured nucleation and growth rates of poly(L-lactic acid) (PLLA) microparticles produced during precipitation with a compressed-fluid antisolvent (PCA). The injector/precipitator used in this study satisfied the constraints and assumptions incorporated in the development of the mixed-suspension, mixed-product-removal population balance theory. A semicontinuous operation mode with batch product filtering was developed, and results from product particle size distributions allowed nucleation and growth rates to be determined through the use of population balances. Kinetic data, obtained by operating the precipitator under various degrees of supersaturation and suspension density, were used to generate a nucleation rate model for PLLA. Model results indicate a relative kinetic order of 1 and a linear dependence of the nucleation rate on the suspension density. First-order dependence of the nucleation rate on suspension density suggests secondary nucleation mechanism(s) are operative within this PCA flow system and may explain the relative insensitivity of particle size distributions to changes in PCA operating conditions.     

Donor-substituted peralkynylated "radiaannulenes": novel all-carbon macrocycles with an intense intramolecular charge-transfer

A novel class of planar, highly conjugated all-carbon macrocycles, which we christened "radiaannulenes", have been prepared based on acetylenic scaffolding using tetraethynylethene (TEE) building blocks; these structures are powerful electron acceptors and, upon peripheral substitution with electron-donating N,N-dialkylanilino groups, display intense intramolecular charge-transfer.     

Comparison of three sequential extraction procedures used to study trace metal distribution in an acidic sandy soil

On an acid sandy soil contaminated with trace metals (Fe, Mn, Cu, Pb and Zn), three sequential extraction procedures were compared to determine the efficiency of the reagents used and the effects of the step order on the fractionation of metal species. In all cases, a magnesium nitrate solution (MgNIT) was previously used to extract exchangeable forms. In the first procedure (I), the next extraction step was performed with sodium acetate buffer (NaOAc), as used on calcareous soils, to dissolve active calcium carbonate. Then trace metals bound to different forms of oxi-hydroxides (NH(2)OH, TAMOx and TAMAs fractions) were extracted before organic matter/sulfide oxidation with hydrogen peroxide at pH 2.0 in nitric acid medium (OMHyd). Finally, residual bound metals (RESID) in each procedure were extracted with a nitric-hydrofluoric-perchloric acid mixture. The second procedure (II) was the same as I, but without the NaOAc step, because of the absence of carbonate in the study soil. In procedure III, the NaOAc step was omitted and the oxidizable organic/sulfide fraction was extracted with sodium hypochlorite at pH 8.5 (OMOCl) before the reducible fractions. This study first showed that NaOAc may remove considerable amounts of metals (especially Mn and Zn) in other forms than exchangeable ones. Procedures II and III give similar results for Fe, Mn and Zn forms, which were mainly found in fractions of inorganic soil components, but not for Cu and Pb. Copper distribution was affected by the position of the oxidation step in the sequence. In procedure II, where the oxidation step (OMHyd) ended the sequence, Cu was mainly recovered in the TAMOx fraction. However, in procedure III, where the oxidation step (OMOCl) preceded the NH(2)OH, TAMOx and TAMAs steps, Cu was found in both OMOCl and TAMOx fractions. Lead distribution varied with oxidation reagent: it was partly removed in the OMHyd fraction of procedures I and II, and to a much lower extent in the OMOCl fraction of procedure III, probably due to the alkaline pH of the reagent in the latter case.