Recovery and sporicidal resistance of various B. subtilis spore preparations on porcelain penicylinders compared with results from AOAC test methods

Sporicidal test results obtained from carriers inoculated with 4 types of defined Bacillus subtilis spore preparations were compared with the standard AOAC sporicidal test using soil extract nutrient broth (SENB) B. subtilis 19659 spores. Recoveries of spores inoculated on penicylinders from B. subtilis clean spores (washed and suspended in water) and B. subtilis 19659 spores inoculated from culture filtrates according to the AOAC method were compared. Spores were exposed to 6 concentrations (0.5-3.0% w/v) of glutaraldehyde in phosphate buffer (pH 7.5) for 10 h. Concentrations were established by titrimetry and liquid chromatography. Recoveries of surviving spores were determined for 3 types of clean B. subtilis var. niger preparations, one clean B. subtilis 19659 preparation, and the SENB B. subtilis 19659 filtrates. Spore carriers, inoculated by the standard AOAC protocol, resulted in as much as a 2-log number difference in runs 1-12, but not more than 0.5 log number for each clean spore preparation. The SENB spores varied most in resistance to glutaraldehyde, with no growth in recovery media from 3 different batches of 1, 1.5, and 2% glutaraldehyde. Separate batches of SENB preparations of B. subtilis 19659 were resistant and destroyed by 1.0% glutaraldehyde, with 3.98 and 6.0 log numbers of spores on penicylinders, respectively. Clean spore preparations of B. subtilis 19659 on porcelain penicylinders were more resistant to glutaraldehyde than were SENB spores. Nutrient agar/Mg/Ca and nutrient agar/Mg spore preparations of B. subtilis var. niger showed the most uniform resistance to glutaraldehyde. Spores with calcium added showed increased resistance to glutaraldehyde. B. subtilis 19659 spores from the Columbia broth spore preparation were the most resistant and were recovered after exposure to 3.0% glutaraldehyde.     

The dissociation quotients of formic acid in sodium chloride solutions to 200°C

The dissociation quotients of formic acid were measured potentiometrically from 25 to 200°C in NaCl solutions at ionic strengths of 0.1, 0.3 1.0, 3.0, and 5.0 mol-kg^–1. The experiments were carried out in a concentration cell with hydrogen electrodes. The resulting molal acid dissociation quotients for formic acid, as well as a set of infinite dilution literature values and a calorimetrically-determined enthalpy of reaction, were fitted by an empirical equation involving an extended Debye Hückel term and seven adjustable parameters involving functions of temperature and ionic strength. This regressional analysis yielded the following thermodynamic quantities for 25°C: logK=–3.755±0.002, H^o=–0.09±0.15 kJ-mol^–1, S^o=–72.2±0.5 J-K^–1-mol^–1, and C _p ^o =–147±4 J-K^–1-mol^–1. The isocoulombic form of the equilibrium constant is recommended for extrapolation to higher temperatures.     

Synthesis of mixed acid anhydrides from methane and carbon dioxide in acid solvents

[reaction: see text] The reaction of CH(4) with CO(2) has been performed in anhydrous acids using VO(acac)(2) and K(2)S(2)O(8) as promoters. NMR analysis establishes that the primary product is a mixed anhydride of acetic acid and the acid solvent. In sulfuric acid, the overall reaction is CH(4) + CO(2) + SO(3) --> CH(3)C(O)-O-SO(3)H. Hydrolysis of the mixed anhydride produces acetic acid and the solvent acid. When trifluoroacetic acid is the solvent, acetic acid is primarily formed via the reaction CH(4) + CF(3)COOH --> CH(3)COOH + CHF(3).     

Investigations of thermal polymerization in the stable free‐radical polymerization of 2‐vinylnaphthalene

The feasibility of utilizing stable free‐radical polymerization (SFRP) in the synthesis of well‐defined poly(2‐vinylnaphthalene) homopolymers has been investigated. Efforts to control molecular weight by manipulating initiator concentration while maintaining a 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (TEMPO):benzoyl peroxide (BPO) molar ratio of 1.2:1 proved unsuccessful. In addition, systematic variations of the TEMPO: BPO molar ratio did not result in narrow molecular weight distributions. In situ Fourier transform infrared spectroscopy (FTIR) indicated that the rate of monomer disappearance under SFRP and thermal conditions were identical. This observation indicated a lack of control in the presence of the stable free radical, TEMPO. The similarities in chemical structure between styrene and 2‐vinylnaphthalene suggested thermally initiated polymerization occurred via the Mayo mechanism. A kinetic analysis of the thermal polymerization of styrene and 2‐vinylnaphthalene suggested that the additional fused ring in 2‐vinylnaphthalene increased the propensity for thermal polymerization. The observed rate constant for thermal polymerization of 2‐vinylnaphthalene was determined using in situ FTIR spectroscopy and was one order of magnitude greater than styrene, assuming pseudo‐first‐order kinetics. Also, an Arrhenius analysis indicated that the activation energy for the thermal polymerization of 2‐vinylnaphthalene was 30 kJ/mol less than styrene. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 583–590, 2002; DOI 10.1002/pola.10131     

Dielectric Relaxations in Plasma-Polymerized Hydrocarbons and Fluorocarbons

The dielectric behavior of plasma-polymerized ethylene (PPE), ethylene/acetylene (PPEA), ethane/vinyl chloride (PPEVC) and tetrafluoroethylene (PPTFE) was studied over a frequency range of 10² to 10⁵ Hz between -150 and 100°C. After exposure to the atmosphere, each of the polymers exhibited a pronounced loss peak. This relaxation process was designated as the γ_pprocess, and was attributed to the local mode motion of several molecular segments. The average activation energy for all four polymers was found to be 13.8 kcal/mole. It was proposed that oxidation introduces carbonyl groups into the nonpolar polymer chain. The added polar carbonyl groups then act as tracers to render the molecular motions observable by dielectric measurements. The presence of these carbonyl groups was confirmed by concomitant IR spectroscopic determinations. Comparison of the experimental data with the Kirkwood-Froelich theory was found to be satisfactory.     

Siloxyaluminate and Siloxygallate Complexes as Models for Framework and Partially Hydrolyzed Framework Sites in Zeolites and Zeotypes

Anionic molecular models for nonhydrolyzed and partially hydrolyzed aluminum and gallium framework sites on silica, M[OSi(OtBu)₃]₄⁻ and HOM[OSi(OtBu)₃]₃⁻ (where M=Al or Ga), were synthesized from anionic chlorides Li{M[OSi(OtBu)₃]₃Cl} in salt metathesis reactions. Sequestration of lithium cations with [12]crown-4 afforded charge-separated ion pairs composed of monomeric anions M[OSi(OtBu)₃]₄⁻ with outer-sphere [([12]crown-4)₂Li]⁺ cations, and hydroxides {HOM[OSi(OtBu)₃]₃} with pendant [([12]crown-4)Li]⁺ cations. These molecular models were characterized by single-crystal X-ray diffraction, vibrational spectroscopy, mass spectrometry and NMR spectroscopy. Upon treatment of monomeric [([12]crown-4)Li]{HOM[OSi(OtBu)₃]₃} complexes with benzyl alcohol, benzyloxide complexes were formed, modeling a possible pathway for the formation of active sites for Meerwin–Ponndorf–Verley (MPV) transfer hydrogenations with Al/Ga-doped silica catalysts.     

Poling and crosslinking processes in NLO polymers

A series of photocrosslinkable polymers bearing hyperpolarizable side chain chromophores was synthesized, poled and evaluated on the basis of the thermal stability of Second Harmonic Generation (SHG). Photoinitiation allowed for control of the onset of curing. Crosslinking was monitored by infrared spectroscopy and optimal conversion was achieved by applying a slow temperature ramp during exposure. The ultimate stability of the poled polymers was directly related to the number of crosslinking substituents that were attached to the chromophore pendant group. With two reactive groups per chromophore significant SHG was retained at temperatures above the initial polymer glass transition temperature. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2769–2775     

Simulation of laser-driven,ablated plasma flows in collisionless shock experiments on OMEGA and the NIF

Experiments investigating the physics of interpenetrating, collisionless, ablated plasma flows have become an important area of research in the high-energy-density field. In order to evaluate the feasibility of designing experiments that will generate a collisionless shock mediated by the Weibel instability on the National Ignition Facility (NIF) laser, computer simulations using the Center for Radiative Shock Hydrodynamics (CRASH) radiation-hydrodynamics model have been carried out. This paper reports assessment of whether the experiment can reach the required scale size while maintaining the low interflow collisionality necessary for the collisionless shock to form. Comparison of simulation results with data from Omega experiments shows the ability of the CRASH code to model these ablated systems. The combined results indicate that experiments on the NIF are capable of reaching the regimes necessary for the formation of a collisionless shock in a laboratory experiment.     

MCRs reshaped into a switchable microwave-assisted protocol toward 5-aminoimidazoles and dihydrotriazines

A tunable microwave-assisted protocol for the synthesis of two biologically relevant families of heterocycles has been designed. Via a simple switch of reaction conditions, the same starting materials can be engaged in either an improved synthesis of the dihydrotriazine scaffold or a novel, first-in-class MCR to render the challenging 5-aminoimidazole nucleus in a single step. An additional first-in-class MCR is also reported utilizing guanidines to afford 2,5-aminoimidazoles.