A Low‐dimensional Viologen/Iodoargentate Hybrid [(BV)2­(Ag5I9)]n: Structure,Properties, and Theoretical Study

A new low‐dimensional benzyl viologen/iodoargentate hybrid, [(BV)₂(Ag₅I₉)]_n ( 1 ) (BV²⁺ = benzyl viologen) was prepared. In 1 , (Ag₆I₉)_n^2– chain exhibits a new type of one‐dimensional chain constructed from vertex‐sharing of Ag₅I₁₀ units, and its two‐dimensional layer structure was constructed from C–H ··· I hydrogen bonds. Strong luminescence at 404 nm can be detected in 1 . DFT calculation suggests that 1 displays a reduced bandgap, which is led by a more dispersed LUMO band of BV²⁺ compared with MV²⁺ in [MV(Ag₂I₄)]_n.     

One‐Pot Synthesis of Highly Substituted Polyheteroaromatic Compounds by Rhodium(III)‐Catalyzed Multiple C?H Activation and Annulation

A new method for the synthesis of highly substituted naphthyridine‐based polyheteroaromatic compounds in high yields proceeds through rhodium(III)‐catalyzed multiple C H bond cleavage and C C and C N bond formation in a one‐pot process. Such highly substituted polyheteroaromatic compounds have attracted much attention because of their unique π‐conjugation, which make them suitable materials for organic semiconductors and luminescent materials. Furthermore, a possible mechanism, which involves multiple chelation‐assisted ortho C H activation, alkyne insertion, and reductive elimination, is proposed for this transformation.     

Characterization of size‐segregated aerosols using ToF‐SIMS imaging and depth profiling

Size‐segregated particles were collected with a ten‐stage micro‐orifice uniform deposit impactor from a busy walkway in a downtown area of Hong Kong. The surface chemical compositions of aerosol samples from each stage were analyzed using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) operated in the static mode. The ToF‐SIMS spectra of particles from stage 2 (5.6–10 µm), stage 6 (0.56–1 µm), and stage 10 (0.056–0.1 µm) were compared, and the positive ion spectra from stage 2 to stage 10 were analyzed with principal component analysis (PCA). Both spectral analysis and PCA results show that the coarse‐mode particles were associated with inorganic ions, while the fine particles were associated with organic ions. PCA results further show that the particle surface compositions were size dependent. Particles from the same mode exhibited more similar surface features. Particles from stage 2 (5.6–10 µm), stage 6 (0.56–1 µm), and stage 10 (0.056–0.1 µm) were further selected as representatives of the three modes, and the chemical compositions of these modes of particles were examined using ToF‐SIMS imaging and depth profiling. The results reveal a non‐uniform chemical distribution from the outer to the inner layer of the particles. The coarse‐mode particles were shown to contain inorganic salts beneath the organics surface. The accumulation‐mode particles contained sulfate, nitrate, ammonium salts, and silicate in the regions below a thick surface layer of organic species. The nucleation‐mode particles consisted mainly of soot particles with a surface coated with sulfate, hydrocarbons, and, possibly, fullerenic carbon. The study demonstrated the capability of ToF‐SIMS depth profiling and imaging in characterizing both the surface and the region beneath the surface of aerosol particles. It also revealed the complex heterogeneity of chemical composition in size and depth distributions of atmospheric particles. Copyright © 2014 John Wiley & Sons, Ltd.     

Genetic profile characterization and population study of 21 autosomal STR in Chinese Kazak ethnic minority group

Short tandem repeat loci have been recognized as useful tools in the routine forensic application and in recent decades, more and more new short tandem repeat (STR) loci have been constantly discovered, studied, and applied in forensic caseworks. In this study, we investigated the genetic polymorphisms of 21 STR loci in the Kazak ethnic minority as well as the genetic relationships between the Kazak ethnic minority and other populations. Allelic frequencies of 21 STR loci were obtained from 114 unrelated healthy Kazak individuals in the Ili Kazak Autonomous Prefecture, Xinjiang Uigur Autonomous Region of China. We observed a total of 159 alleles in the group with the allelic diversity values ranging from 0.0044 to 0.5088. The highest polymorphism was found at D19S433 locus and the lowest was found at D1S1627. Statistical analysis of the generated data indicated no deviation from Hardy–Weinberg equilibriums at all 21 STR loci. In order to estimate the population differentiation, allelic frequencies of all STR loci of the Kazak were compared with those of other neighboring populations using analysis of molecular variance method. Statistically significant differences were found between the studied population and other populations at 2–7 STR loci. A neighbor‐joining tree was constructed based on allelic frequencies of the 21 STR loci and phylogenetic analysis indicates that the Kazak has a close genetic relationship with the Uigur ethnic group. The present results may provide useful information for forensic sciences and population genetics studies, and can also increase our understanding of the genetic background of this group. The present findings showed that all the 21 STR loci are highly genetically polymorphic in the Kazak group, which provided valuable population genetic data for the genetic information study, forensic human individual identification, and paternity tests.     

Recombination analysis of autosomal short tandem repeats in Chinese Han families

Recombination fractions between forensic STRs can be extrapolated from the International HapMap Project, but the concordance between recombination fractions predicated from genetic maps and derived from observation of STR transmissions in families is still ambiguous for autosomal STRs because of limited family studies. Therefore, the main goal of this study is to compare recombination fractions estimated by pedigree analysis with those derived from HapMap phase SNP data. Genotypes of nine autosomal STR pairs (TPOX‐D2S1772, D5S818‐CSF1PO, D7S3048‐D7S820, D8S1132‐D8S1179, TH01‐D11S2368, vWA‐D12S391, D13S325‐D13S317, D18S51‐D18S1364, and D21S11‐PentaD) from 207 two‐generation families with two to five children (the number of families with five, four, three, and two children was 2, 3, 20, and 182, respectively) were used to analyze the recombination. The linkage analysis showed that significant linkage was observed at six STR pairs (D5S818‐CSF1PO, D8S1132‐D8S1179, TH01‐D11S2368, vWA‐D12S391, D13S325‐D13S317, and D18S51‐D18S1364) with genetic distances <36.22 cM in HapMap. Their recombination fractions calculated from family data were very close to those derived from HapMap. However, three STR pairs of TPOX‐D2S1772, D7S3048‐D7S820, and D21S11‐PentaD showed no significant linkage with genetic distances from 43.38 to 91.49 cM. Our results indicate that recombination fractions extrapolated from HapMap can provide a substitute if empirical data are unavailable for the linkage STR pair with a genetic distance spanned <36.22 cM.     

A simple fabrication method for tapered capillary tip and its applications in high‐speed CE and ESI‐MS

Fabrication of capillaries with tapered tips is an important technique that is required in many analytical chemistry areas, such as ESI‐MS, CE, electrochemical analysis, and microinjection. This paper describes a simple and effective grinding‐based fabrication method for capillaries with tapered tips. A novel grinding mode utilizing the combination of rotation and precession of an elastic capillary was developed, which significantly improved the controllability to the grinding process as well as the capillary tip shape. The capillary was fabricated by fixing it in an electric drill installed perpendicularly, and grind the capillary tip rotated around its own axis as well as the drill axis on sandpapers. Compared with conventional fabrication techniques for capillary tips, the present method is easy to control the capillary tip shape in routine laboratories without the requirement of expensive equipments or poisonous reagent (e.g. hydrofluoric acid (HF) solution). Various capillaries with different tip diameters and tip taper angles could be fabricated using the present method with good controllability and reproducibility. These capillaries were applied in high‐speed CE and ESI‐MS analysis to demonstrate the feasibility and potential of this fabrication method.     

Thermal-Induced Dimerization Cyclization of Ethyl N-(Styrylcarbamoyl)acetates: Formation of 4-Hydroxy-2(1H)-pyridone-3- carboxamide Derivatives

Thermal-induced dimerization cyclization of ethyl N-(styrylcarbamoyl)acetate derivatives has been investigated, leading to 4-hydroxy-2(1H)-pyridone-3-carboxamide derivatives with good yields in diphenyl ether on 200–210 °C. Ethyl N-(styrylcarbamoyl)acetate derivatives readily provided the intermolecular cyclization products 4-hydroxy-2(1H)-pyridone-3-carboxylates on reflux in xylene. In addition, several related 3-acetyl-4-hydroxy-5-phenylpyridin-2(1H)-ones have been prepared. It provided an efficient preparation of 4-hydroxy-2(1H)-pyridone-3-carboxamide derivatives.     

Dopamine derivatives from the insect Polyrhachis dives as inhibitors of ROCK1/2 and stimulators of neural stem cell proliferation

Polyrhachis dives is consumed as an insect food in some regions of China. In this study, new dopamine derivatives, (+)-polyrhadopamine A (1a) and (−)-polyrhadopamine A (1b), (+)-polyrhadopamine B (2a) and (−)-polyrhadopamine B (2b), and polyrhadopamines C–E (3–5), were isolated from this species. The structures and stereochemistry of these substances were assigned by using spectroscopic and computational methods. Compounds 1a, 1b, 2a, and 2b are dimeric N-acetyldopamine derivatives, 3 is a dopamine analog containing an unusual sulfone group, and 4 and 5 possess a rare benzo[d]thiazole moiety. The functions of these substances as ROCK1/2 inhibitors, neural stem cell (NSCs) proliferation stimulators, immunosuppressive, and anti-inflammatory agents were determined.     

Solvent-free Brønsted acid-catalyzed Michael addition of nitrogen- and carbon-containing nucleophiles by ultrasound activation

A new method has been developed for the Michael addition of nitrogen- and carbon-containing nucleophiles to cyclic enones. Using this conjugate addition reaction, a variety of different nucleophiles can react with a range of cyclic enones in the presence of p-toluenesulfonic acid under solvent-free ultrasound irradiation conditions affording the corresponding C–N or C–C adducts in good to excellent yields. Comparatively, performing the reaction under ultrasound irradiation gives higher yields, is more efficient and environmentally benign than performing it at high pressure.