Viscometric study of gelatin in dilute aqueous solutions

The viscosities of aqueous solutions of gelatin at different temperatures were carefully measured in a common glass‐capillary Ubbelohde viscometer at dilute to extremely dilute concentrations. The adsorption effect that occurred in the viscosity measurements was theoretically analyzed and discussed. A theory based on Langmuir isotherms could adequately describe the existing data. Some structural information was obtained by the use of an iterative fitting procedure to treat the reduced viscosity data, which disclosed that individual gelatin chains underwent a coil‐to‐helix transition as the solution cooled from 40 to 15 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1804–1812, 2006     

Preparation and characterization of rigid poly(vinyl chloride)/MMT nanocomposites. II. XRD,morphological and mechanical characteristics

A Haake torque rheometer equipped with an internal mixer is used to study the influence of the amount of sodium montmorillonite (Na⁺‐MMT) and organically modified MMT (O‐MMT) on X‐ray diffraction (XRD), morphology, and mechanical characteristics of rigid poly (vinyl chloride) (PVC)/Na⁺‐MMT and PVC/O‐MMT nanocomposites, respectively. Results of XRD and transmission electron microscopy (TEM) indicate that MMT is partially encapsulated and intercalated in the rigid PVC/Na⁺‐MMT nanocomposites. However, results of XRD and TEM show MMT is partially intercalated and exfoliated in the rigid PVC/O‐MMT nanocomposites. Tensile strength, yield strength, and elongation at break of the rigid PVC/MMT nanocomposites were improved simultaneously with adding 1–3 wt % Na⁺‐MMT or O‐MMT with respect to that of pristine PVC. However, the addition of Na⁺‐MMT or O‐MMT should be kept as not more than 3 wt % to optimize the mechanical properties and the processing stability of the rigid PVC/MMT nanocomposites. SEM micrographs of the fractured surfaces of the rigid PVC/Na⁺‐MMT and PVC/O‐MMT nanocomposites both before and after tensile tests were also illustrated and compared. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2145–2154, 2006     

基于CT算法的束团横向相空间测量

精确测量束团的发射度和横向相空间, 在高亮度电子束的产生和应用中具有重要意义. 传统测量方法在测量发射度时需要对束团在相空间内分布进行初始假设, 且只能给出相椭圆的twiss参数;基于CT(computerized tomography)算法的束团横向相空间测量方法无需先验假设, 能给出粒子在相空间内的真实分布, 测量结果更为精确. 介绍了基于CT算法的束团横向相空间测量的原理和初步实验结果, 并与四极透镜扫描法测量的结果进行了比较.     

Tunable negative refraction by electro-optical control in two-dimensional photonic crystal

This paper describes a simple hydrothermal procedure for high-yield synthesis of single-crystalline ZnO hexagonal nanoplates in a surfactant-free system at 70 °C. The structures and morphologies of the synthesized ZnO nanoplates are derived from characterisation by X-ray diffraction, and scanning and transmission electron microscopy. Their optical properties are recorded by Raman and photoluminescence spectroscopy. These ZnO hexagonal nanoplates exhibit the enhanced photocatalytic activity of phenol photodecomposition, suggesting that they could be served as an active system for the treatment of the waste water, in addition to their common applications. PACS 81.10.Dn; 61.10.Nz; 68.37.Hk; 78.55.Hx     

聚甲基丙烯酸甲酯掺杂Ce3+的飞秒激光三维信息存储

用飞秒激光(200 fs,1 kHz,800 nm)脉冲在掺杂稀土离子Ce3 的聚甲基丙烯酸甲酯(PMMA)膜中进行了光存储实验研究,包括对样品的吸收光谱、激光照射前后的电子旋转共振(Electron spin resonance,ESR)光谱的测量和讨论。结果表明掺杂稀土离子Ce3 的聚甲基丙烯酸甲酯膜具有较低的写入阈值,有利于高速、并行的三维光存储。实验结果采用传统光学显微镜并行读出。给出了四层存储结果(点间距和层间距分别是4μm和16μm),并讨论了脉冲能量的大小对空腔尺寸的影响,进行高密度存储时,在保证读出信号灰度值足够大的情况下,应选择尽量小的激光脉冲写入能量。实验结果表明这种材料可以应用于三维光信息存储。     

高分子阳离子絮凝剂用于炼油废水处理研究

用聚二甲基二烯丙基氯化铵型高分子阳离子絮凝剂处理炼油废水考察了险油和化学耗氧量的动态变化规律。对产生的浮渣性质及滤饼的成份进行了研究。并且与聚合铝的处理效果进行对照。研究结果表明，ＨＣＡ除油和化学耗管氧量的性能优于ＰＡＣ，ＨＣＡ产生的浮渣是ＰＡＣ的三分之一，而浮渣中的含油量则是ＰＡＣ的三倍。     

LF λ-subgroup Generated by LF Subset

In this paper .an important property layer-preserving of LF group and an concept LF λ-subgroup generated by LF subset will be introduced. On the height of LF group theory ,we recognize the concept generated subgroup more clearly.     

牛血清白蛋白的压电免疫测定及电极的洗脱

在镀银石英晶片上用压电免疫方法测定了０．５～５０ｍｇ／Ｌ范围内的牛血清白蛋白的浓度，得到线性响应；并较全面地研究了压电晶片的回复性使用问题，以０．２ｍｏｌ／Ｌ甘氨酸－盐酸（ｐＨ＝２．０）溶液洗脱时效果较好