Development and validation of methods for the trace determination of phthalates in sludge and vegetables

A routine method which is simple, quick and precise has been set up and validated for phthalate analysis in environmental samples (tomato plants and sewage sludges). Six phthalates have been studied simultaneously: dimethylphthalate, diethylphthalate, di-n-butylphthalate, n-butylbenzylphthalate, di-2-ethyl-hexyl phthalate (DEHP) and di-n-octylphthalate. Optimization of sample, solvent extraction uses a Soxtec apparatus and extract purification with an a solid-phase extraction cartridge allows between 90 and 110% recovery of phthalates. Precise, sensitive and selective identification and quantifying of analytes is by GC-MS in the single ion monitoring mode. This protocol allows analytes with concentrations as low as 10 microg/kg dry matter (DM) to be determined from small (1-2 g DM) samples. This analytical method has been applied to the phthalate transfer study for agricultural recycling of sludges, where phthalate bioavailability has been studied in aquiculture using two types of experiments. Tomatoes have been grown in containers where the trace organics have been directly introduced as pure substances, and in a second experiment under the same growth conditions, sewage sludge has replaced the pure substances. Transfer of these trace organics has been followed into the various parts of the tomato plant and in general only the DEHP is worthy of note although its percentage transfer remains very low even in an experiment designed to maximize this.     

Comment: 2004's fastest organic and biomolecular chemistry!

In January 2004, the Royal Society of Chemistry launched Organic & Biomolecular Chemistry (OBC) - a journal promising to provide high quality research from all aspects of synthetic, physical and biomolecular organic chemistry. The journal was set to build upon the foundations laid down by its predecessor publications (J. Chem. Soc., Perkin Trans. 1 and J. Chem. Soc., Perkin Trans. 2) as well as complement the subject coverage already published in prestigious general chemistry journals such as Chemical Communications and Chemical Society Reviews. Nearly two years on, just how is the programme developing and what can the community expect to see from the Royal Society of Chemistry (RSC)?     

Mechanism of Reppe's nickel-catalyzed ethyne tetramerization to cyclooctatetraene: a DFT study

In this B3 LYP model study, homoleptic nickel(0) ethyne complexes have been predicted as the catalyst resting state for the title reaction. Ethyne ligand coupling of Ni(C(2)H(2))(3) yields monoethyne nickelacyclopentadiene in the rate-determining step. Ethyne coordination is followed by insertion of an ethyne ligand into the Ni--C sigma bond. A highly strained monoethyne trans-nickelacycloheptatriene is formed. This trans intermediate is unable to reductively eliminate benzene without prior isomerization to a cis-structure. Instead, it rapidly collapses to a nickelacyclononatetraene. Ethyne coordination induces reductive elimination to the cyclooctatetraene complex Ni(eta(2)-C(2)H(2))(eta(2)-C(8)H(8)), followed by facile ligand exchange. Other ethyne coupling pathways have been computed to be less favored. The cyclooctatetraene ligand binds significantly weaker to nickel(0) than ethyne, both for mononuclear, and for dinuclear species. For this reason, C--C bond formation steps at Ni(2)(micro-cot) fragments have been predicted to feature prohibitively high overall reaction barriers.     

Development of a gas chromatography/ion trap mass spectrometry based method for the quantification of polybrominated diphenyl ethers and polychlorinated biphenyls in adipose tissue

A combined gas chromatographic mass spectrometric (GC/MS/MS) method for the determination of seven polybrominated diphenyl ethers (PBDEs) and seven marker polychlorinated biphenyls (PCBs) in adipose tissue has been developed. Adipose tissue was melted and filtered through anhydrous sodium sulphate to obtain pure fat. Clean-up was performed using a glass column containing acidified silica, deactivated alumina and anhydrous sodium sulphate. Polybrominated biphenyl (PBB) 155 and Mirex were added as internal standards for PBDEs and PCBs, respectively. Injection standards, PBB 103 and PCB 143, for PBDEs and PCBs, respectively, were added before analysis with GC/MS/MS. The developed GC/MS/MS method has the advantage of being more selective than single MS methods because matrix effects are largely eliminated. Validation of this method was conducted according to Commission Decision 2002/657/EC. Decision limits for PBDEs and PCBs ranged from 0.06-0.15 ng g(-1) and from 0.35-1.22 ng g(-1), respectively. Detection capabilities were all between 0.23-0.55 ng g(-1) for PBDEs and between 0.98-2.29 ng g(-1) for PCBs. Precision, recovery, bias and selectivity were tested, with satisfactory results.     

THz spectroscopic investigation of 2,4-dinitrotoluene

We have investigated the terahertz (THz) spectrum of 2,4-DNT by using Fourier transform infrared spectroscopy in the 0.2–19.5 THz region. We also examined low-frequency intermolecular or phonon modes between 0.2 and 1.8 THz via THz time-domain spectroscopy. The extracted absorption coefficient and refractive index of an intermolecular band at 1.08 THz are 110 cm⁻¹ and 1.67, respectively. Density functional theory (DFT) was applied to obtain structure and vibrational frequencies of 2,4-DNT. The calculated results are in agreement with the experimental data. Observed vibrational frequencies have been interpreted using DFT. Two intermolecular or phonon modes were identified at 1.08 and 2.52 THz.     

Self-repairing polymers: poly(dioxaborolane)s containing trigonal planar boron

The molecular weight of poly(dioxaborolane)s can be controlled during the polymerization reaction or through post-polymerization processing in such a manner that hydrolytic damage to these materials may be repaired, thereby regenerating the polymer.     

Dications of fluorenylidenes. The relationship between redox potentials and antiaromaticity for meta- and para-substituted diphenylmethylidenefluorenes

[reaction: see text] Electrochemical oxidation of meta-substituted diphenylmethylidenefluorenes (3a-g) results in the formation of fluorenylidene dications that are shown to be antiaromatic through calculation of the nucleus independent chemical shift (NICS) for the 5- and 6-membered rings of the fluorenyl system. There is a strong linear correlation between the redox potential for the dication and both the calculated NICS and sigma(m). Redox potentials for formation of dications of analogously substituted tetraphenylethylenes shows that, with the exception of the p-methyl derivative, the redox potentials for these dications are less positive than for formation of the dications of 3a-g and for dications of p-substituted diphenylmethylidenefluorenes, 2a-g. The greater instability of dications of 2a-g and 3a-g compared to the reference system implies their antiaromaticity, which is supported by the positive NICS values. The redox potentials for formation of the dications of meta-substituted diphenylmethylidenes (3a-g) are more positive than for the formation of dications of para-substituted diphenylmethylidenes (2a-g), indicating their greater thermodynamic instability. The NICS values for dications of 3a-g are more antiaromatic than for dications of 2a-g, which is consistent with their greater instability of the dications of 3a-g. Although the substituted diphenylmethyl systems are not able to interact with the fluorenyl system through resonance because of their geometry, they are able to moderate the antiaromaticity of the fluorenyl cationic system. Two models have been suggested for this interaction, sigma to p donation and the ability of the charge on the substituted ring system to affect delocalization. Examination of bond lengths shows very limited variation, which argues against sigma to p donation in these systems. A strong correlation between NICS and sigma constants suggests that factors that affect the magnitude of the charge on the benzylic (alpha) carbon of the diphenylmethyl cation affect the antiaromaticity of the fluorenyl cation. Calculated atomic charges on carbons 1-8 and 10-13 show an increase in positive charge, and therefore greater delocalization of charge in the fluorenyl system, with increasing electronegativity of the substituent. The change in the amount of positive charge correlated strongly with NICS, supporting the model in which the amount of delocalization of charge is related to the antiaromaticity of the species. Thus, both aromatic and antiaromatic species are characterized by extensive delocalization of electron density.     

Quantitative analysis by high-performance liquid chromatography atmospheric pressure chemical ionization mass spectrometry: The determination of the renin inhibitor CP-80,794 in human serum

A specific method was developed for the quantitative determination of the renin inhibitor CP-BO,794. Serum extracts containing the drug and an internal standard were injected into a standard reverse-phase high-performance liquid chromatography (HPLC) column. The mobile phase, methanol/water (8/2), flowed at 1 ml/min through the column and then via a heated nebulizer interface into a corona discharge atmospheric pressure chemical ionization source. The assay minimum limit of quantification was 50 pg/mL. It exhibits satisfactory accuracy and precision over the range 50 pg/ml, to 10 ng/mL. A minor modification of the HPLC mobile phase was necessary to attain extremely low detection limits. The addition of a structural analogue contributed to enhancing the precision of the assay.     

Etude comparative de l'alkylation des tetraphenylporphyrines de l'etain et de leurs formes reduites par les reactifs de grignard

A comparative study of alkylation by Grignard reagents of PSn(OH)₂ (P = tetraphenylporphyrin (TPP), tetraphenylchlorine (TPC), tetraphenylisobacteriochlorine (TPiBC)) shows that dialkylstannylisobacteriochlorines are the most easily obtained. The presence of transition metals in the magnesium crystals directs the reaction towards reduction of the macrocycle instead of alkylation on tin. This is supplementary proof for the intervention of a single electron transfer mechanism (SET) in alkylation of a macrocycle by Grignard reagents.These results fit very well with earlier electrochemical experiments and the measurements of the reduction potentials of the Group IVB metalloporphyrins and their reduced forms.     

The use of high-speed differential scanning calorimetry (Hyper-DSC™) to study the thermal properties of carbamazepine polymorphs

The thermal properties of two polymorphs of the drug carbamazepine, Forms I and III, were studied using high-speed differential scanning calorimetry (DSC). Previously, accurate determination of the heat enthalpy of fusion of Form III has not been possible using DSC at typical heating rates, due to concurrent exothermic recrystallisation to the higher-melting Form I. Here, it is demonstrated that heating rates of 250° C/min altered the kinetics of the melting transition of Form III such that this concurrent exothermic recrystallisation was inhibited. This allowed direct measurement of the enthalpy of the melting endotherm for Form III from a single transition. The enthalpy of this transition was found to be 109.5 J/g. Further investigations were then performed to test the utility of this technique in quantifying relative amounts of Forms I and III in mixtures of the two polymorphs. It was demonstrated that a limit of detection of 1% (w/w) was possible in this system. However, accurate quantification was not possible due to seeding effects initiating recrystallisation to Form I in these mixtures, even at these elevated heating rates. The utility of this novel technique as a fast analytical tool for studying the polymorphic behaviour of metastable polymorphs has been successfully demonstrated.