Selective pressurized liquid extraction of estrogenic compounds in soil and analysis by gas chromatography-mass spectrometry

A selective pressurized liquid extraction (SPLE) method, followed by gas chromatography–mass spectrometry (GC–MS), for the simultaneous extraction and clean-up of estrone (E1), 17β-estradiol (E2), 17α-ethynylestradiol (EE2), estriol (E3) and bisphenol A (BPA) from soil samples is described. The on-line clean-up of soil by SPLE was achieved using different organic matter retainers, including silica, alumina and Florisil, the most effective being silica. Thus, different amounts of silica, in conjunction with different extraction solvents (acetone, ethyl acetate, isohexane and dichloromethane), either alone or in combination, were used to extract the target chemicals from spiked soil samples. It was shown that 3 g silica resulted in satisfactory rates of recovery of target compounds and acetone:dichloromethane (1:3, v/v) was efficient in extracting and eluting estrogenic compounds for SPLE. Variables affecting the SPLE efficiency, including temperature and pressure were studied; the optimum parameters were 60 °C and 1500 psi, respectively. The limits of detection (LODs) of the proposed method were 0.02–0.37 ng g⁻¹ for the different estrogenic chemicals studied. The outputs using the proposed method were linear over the range from 0.1 to 120 ng g⁻¹ for E1, E2, EE2, 0.2–120 ng g⁻¹ for E3, and 0.5–120 ng g⁻¹ for BPA. The optimized method was further verified by performing spiking experiments in natural soil matrices; good rates of recovery and reproducibility were achieved for all selected compounds and the method was successfully applied to soil samples from Northeast Scotland, for the determination of the target compounds.     

Solid phase extraction of DNA from biological samples in a post-based, high surface area poly(methyl methacrylate) (PMMA) microdevice

This work describes the performance of poly(methyl methacrylate) (PMMA) microfluidic DNA purification devices with embedded microfabricated posts, functionalized with chitosan. PMMA is attractive as a substrate for creating high surface area (SA) posts for DNA capture because X-ray lithography can be exploited for extremely reproducible fabrication of high SA structures. However, this advantage is offset by the delicate nature of the posts when attempting bonding to create a closed system, and by the challenge of functionalizing the PMMA surface with a group that invokes DNA binding. Methods are described for covalent functionalization of the post surfaces with chitosan that binds DNA in a pH-dependent manner, as well as for bonding methods that avoid damaging the underlying post structure. A number of geometric posts designs are explored, with the goal of identifying post structures that provide the requisite surface area without a concurrent rise in fluidic resistance that promotes device failure. Initial proof-of-principle is shown by recovery of prepurified human genomic DNA (hgDNA), with real-world utility illustrated by purifying hgDNA from whole blood and demonstrating it to be PCR-amplifiable.     

Adsorption of anionic and cationic dyes by activated carbons, PVA hydrogels, and PVA/AC composite

The textural and adsorption characteristics of a series of activated carbons (ACs), porous poly(vinyl alcohol) (PVA) gels, and PVA/AC composites were studied using scanning electron microscopy, mercury porosimetry, adsorption of nitrogen (at 77.4 K), cationic methylene blue (MB), anionic methyl orange (MO), and Congo red (CR) from the aqueous solutions. Dye-PVA-AC-water interactions were modeled using the semiempirical quantum chemical method PM6. The percentage of dye removed (C(rem)) by the ACs was close to 100% at an equilibrium concentration (C(eq)) of less than 0.1 mM but decreased with increasing dye concentration. This decrease was stronger at C(eq) of less than 1 mM, and C(rem) was less than 50% at a C(eq) of 10-20 mM. For PVA and the PVA/AC composite containing C-7, the C(rem) values were minimal (<75%). The free energy distribution functions (f(ΔG)) for dye adsorption include one to three peaks in the -ΔG range of 1-60 kJ/mol, depending on the dye concentration range used and the spatial, charge symmetry of the hydrated dye ions and the structural characteristics of the adsorbents. The f(ΔG) shape is most complex for MO with the most asymmetrical geometry and charge distribution and adsorbed at concentrations over a large C(eq) range. For symmetrical CR ions, adsorbed over a narrow C(eq) range, the f(ΔG) plot includes mainly one narrow peak. MB has a minimal molecular size at a planar geometry (especially important for effective adsorption in slit-shaped pores) which explains its greater adsorptive capacity over that of MO or CR. Dye adsorption was greatest for ACs with the largest surface area but as molecular size increases adsorption depends to a greater extent on the pore size distribution in addition to total and nanopore surface areas and pore volume.     

Engineering of a redox protein for DNA-directed assembly

Engineered enzyme conjugate of the small laccase enzyme from Streptomyces coelicolor and zinc finger DNA binding domain from Zif268 is demonstrated to bind double stranded DNA in a site specific manner while retaining enzymatic activity.     

Unusual decrease in conductivity upon hydration in acceptor doped, microcrystalline ceria

The impact of hydration on the transport properties of microcrystalline Sm(0.15)Ce(0.85)O(1.925) has been examined. Dense, polycrystalline samples were obtained by conventional ceramic processing and the grain boundary regions were found, by high resolution transmission electron microscopy, to be free of impurity phases. Impedance spectroscopy measurements were performed over the temperature range 250 to 650 °C under dry, H(2)O-saturated, and D(2)O-saturated synthetic air; and over the temperature range 575 to 650 °C under H(2)-H(2)O atmospheres. Under oxidizing conditions humidification by either H(2)O or D(2)O caused a substantial increase in the grain boundary resistivity, while leaving the bulk (or grain interior) properties unchanged. This unusual behavior, which was found to be both reversible and reproducible, is interpreted in terms of the space-charge model, which adequately explains all the features of the measured data. It is found that the space-charge potential increases by 5-7 mV under humidification, in turn, exacerbating oxygen vacancy depletion in the space-charge regions and leading to the observed reduction in grain boundary conductivity. It is proposed that the heightened space-charge potential reflects a change in the relative energetics of vacancy creation in the bulk and at the grain boundary interfaces as a result of water uptake into the grain boundary core. Negligible bulk water uptake is detected under both oxidizing and reducing conditions.     

Hydroxyl Substituent Chemical Shift (SCS) Effects in Alcohols: The 17O NMR of Diols

The ¹⁷O NMR spectra for a series of saturated diols were investigated. From these studies both hydroxyl induced substituent chemical shift (SCS) effects of hydroxyl oxygen ¹⁷O NMR chemical shifts were determined. In addition, linear correlations between the ¹⁷O chemical shift of the hydroxyl oxygen (ROH) and the ¹³C chemical shift for the methyl group in the corresponding hydrocarbon (RCH₃) were obtained.

     

Construction of fiber-optic bundle light-collection systems and calculations of collection efficiency

This paper describes the position-sensitive light-collection system that we use in our fast-beam laser experiments. The collection system consists of fiber-optic bundles whose facets are arranged to accept light emitted from a beam of fluorescent atoms. The flexibility of the fiber bundles allows their use in scanning collection systems with precise position sensitivity. We describe calculations of geometrical collection efficiency using a numerical integration scheme and compare the results with measurements. We also compare the collection efficiencies of the different fiber bundle arrangements that we used as our apparatus evolved with the implementation of various improvements.     

The effects of monophenol chain terminators on the structure–property relationships of controlled epoxy networks

Five families of new controlled epoxy thermosets (CENs) using three monophenol chain terminators were prepared to study systematic changes in the structure and amount of the monophenol and the initial molecular weight between crosslinks (M_c,i) on the properties of epoxy thermosets. Glass transition temperature (T_g) decreases with monophenol mole fraction (χ) in proportion to both the concentration and flexibility of the chain terminator. Distinct serial relations for T_g depression were observed for the three M_c,i families. Dynamic mechanical analysis (DMA) shows significant perturbations of the relaxation behavior with added terminator as evidenced by decrease in peak tan δ and in post T_g damping. The rubbery coefficients of thermal expansion (CTE) increases with monophenol concentration only at χ > 0.05 and shows distinct curvature versus temperature, but is largely invariant with monophenol flexibility. The thermal stability of terminated CENs decreases only slightly with χ and little difference was found with monophenol structure. Most surprisingly, fracture toughness decreases markedly and discontinuously with χ depending on M_c,i. The values of the critical monophenol concentration at which fracture toughness markedly decreases (χ_c) are inversely proportional to M_c,i but are independent of monophenol flexibility. No correlation of χ_c with any of the calculated network structure parameters was apparent. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1632–1640, 2008