Direct detection of renal function markers using microchip CE with pulsed electrochemical detection

Creatinine, creatine, and uric acid are three important compounds that are measured in a variety of clinical assays, most notably for renal function. Traditional clinical assays for these compounds have focused on the use of enzymes or chemical reactions. Electrophoretic microchips have the potential to integrate separation power of capillary electrophoresis with devices that are small, portable, and have the speed of conventional sensors. The development of a microchip CE system for the direct detection of creatinine, creatine, and uric acid is presented. The device uses pulsed amperometric detection (PAD) to detect the nitrogen-containing compounds as well as the easily oxidizable uric acid. Baseline separation of creatinine, creatine and uric acid was achieved using 30 mM borate buffer (pH = 9.4) in less than 200 s. Linear calibration curves were obtained with limits of detection of 80 microM, 250 microM and 270 microM for creatinine, creatine and uric acid respectively. An optimization of the separation conditions and a comparison of PAD with other amperometric detection modes is also shown. Finally, analysis of a real urine sample is presented with validation of creatinine concentrations using a clinical assay kit based on the Jaffé reaction.     

Searching for precursors to metal-metal bonded dipalladium species: a study of Pd2(4+) complexes

Reactions of Pd3(OAc)6 with lithium salts of mononegative bidentate N,N-ligands, L, of various types, such as formamidinates, benzamidinates, triazinates, and guanidinates, were investigated in a search for ways to obtain Pd2(4+) compounds that could serve as precursors to paddlewheel complexes with a metal-metal bond and a Pd2(5+) core. It was found that the reactions are complex and that either square planar mononuclear or dinuclear species may be formed depending on the reaction conditions or the method of isolation. For Pd2L4 compounds, alpha and beta isomers were sometimes obtainable. In the alpha isomer, all N,N-ligands serve as bridges, whereas in the beta isomer, two ligands bridge the Pd2(4+) unit and each of the other two chelate to a metal atom. Electrochemistry shows that the paddlewheel compounds Pd2(TolNC(H)NTol)4, Pd2(PhNC(Ph)NPh)4, and Pd2(PhNC(Ph)NPh)3(OAc) and the orthometalated complex cis-Pd2[eta2-C6H4NC(Ph)N(H)Ph]2(mu-OAc)2 have reversible oxidation waves between 0.70 and 0.92 V vs Ag/AgCl, which makes them good candidates for chemical oxidation.     

Regioselectivity in acylation of oligosaccharides catalyzed by the metalloprotease thermolysin

Investigation of the acylation scope of carbohydrates by metalloprotease thermolysin immobilized on Celite as biocatalyst has been carried out. The reactions were performed in DMSO, a good solvent for carbohydrates, where the enzyme has previously shown its activity in transesterifications of sucrose, maltose and maltose-containing oligosaccharides. Surprisingly, no reaction was observed for glucose or the glucose-containing disaccharides, trehalose and lactose. In contrast, laurate monoesters of several sucrose-containing tri- and tetrasaccharides were synthetized through a one step transesterification using vinyl laurate as the acylating agent. Enzyme regioselectivity was accurately determined by HPLC/MS and the structure of the main regioisomers was established by a combination of NMR experiments. The preferred position of acylation in all cases was the 2-OH of the α-d-glucopyranose moiety linked 1→2 to the β-d-fructofuranose unit. These results correlate with the regioselectivity observed in the case of the disaccharide sucrose. A general carbohydrate binding motif for catalysis by thermolysin is proposed.     

Synthesis of 4-aryl-2,3,6,7-tetrahydro-1H-pyrimido[4,5-b][1,4]-diazepin-6-ones from 4,5-diamino-1H-pyrimidin-6-ones and 1-aryl-3-(dimethylamino)-1-propanones

The reaction of 1-aryl-3-(dimethylamino)-1-propanones 1 with one equivalent of 4,5-diamino-1H-pyrimidin-6-ones 2 , in acidic medium, leads to the formation of 4-aryl-2,3,6,7-tetrahydro-1H-pyrimido[4,5-b]-[1,4]diazepin-6-ones 3 . The structure elucidation of the products is based on detail nmr analysis of experiments such as ¹³C, ¹H and DEPT including selective ¹³C{¹H} decoupling experiments.     

Molecular nitrides containing group 4 and 5 metals: single and double azatitanocubanes

Treatment of [[Ti(eta(5)-C(5)Me(5))(micro-NH)](3)(micro(3)-N)] (1) with the imido complexes [Ti(NAr)Cl(2)(py)(3)] (Ar=2,4,6-C(6)H(2)Me(3)) and [Ti(NtBu)Cl(2)(py)(3)] in toluene affords the single azatitanocubanes [[Cl(2)(ArN)Ti]( micro(3)-NH)(3)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]].(C(7)H(8)) (2.C(7)H(8)) and [[Cl(2)Ti](micro(3)-N)(2)(micro(3)-NH)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]] (3), respectively. Similar reactions of complex 1 with the niobium and tantalum imido derivatives [[M(NtBu)(NHtBu)Cl(2)(NH(2)tBu)](2)] (M=Nb, Ta) in toluene give the single azaheterometallocubanes [[Cl(2)(tBuN)M](micro(3)-N)(micro(3)-NH)(2)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]] (M=Nb (4), Ta (5)), both complexes react with 2,4,6-trimethylaniline to yield the analogous species [[Cl(2)(ArN)M](micro(3)-N)(micro(3)-NH)(2)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]].(C(7)H(8)) (Ar=2,4,6-C(6)H(2)Me(3), M=Nb (6.C(7)H(8)), Ta (7.C(7)H(8))). Also the azaheterodicubanes [M[micro(3)-N)(2)(micro(3)-NH)](2)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)](2)].2C(7)H(8) [M=Ti (8.2C(7)H(8)), Zr (9.2C(7)H(8))], and [M[(micro(3)-N)(5)(micro(3)-NH)][Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)](2)].2 C(7)H(8) (Nb (10.2C(7)H(8)), Ta (11.2C(7)H(8))) were prepared from 1 and the homoleptic dimethylamido complex [M(NMe(2))(x)] (x=4, M=Ti, Zr; x=5, M=Nb, Ta) in toluene at 150 degrees C. X-ray crystal structure determinations were performed for 6 and 10, which revealed a cube- and double-cube-type core, respectively. For complexes 2 and 4-7 we observed and studied by DNMR a rotation or trigonal-twist of the organometallic ligands [[Ti(eta(5)-C(5)Me(5))(micro-NH)](3)(micro(3)-N)] (1) and [(micro(3)-N)(micro(3)-NH)(2)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]](1-). Density functional theory calculations were carried out on model complexes of 2, 3, and 8 to establish and understand their structures.     

Paired electrosynthesis of cyanoacetic acid

Cyanoacetic acid is formed by cathodic reduction of CO(2) and anodic oxidation of the tetraalkylammonium salt anion; the process is conduced in acetonitrile using a divided cell with a medium porosity glass-frit diaphragm. A mechanism for this paired electrochemical reaction is proposed.     

Incorporating zosteric acid into silicone coatings to achieve its slow release while reducing fresh water bacterial attachment

Biofouling has posed serious problems in maritime industry including increased fuel consumptions, economic loss from ship-hull maintenances, contamination of drinking water, and serious corrosion for mechanical instruments. Minimizing the attachment of bacteria and formation of biofilm could be advantageous in reducing the early stages of biofouling. Zosteric acid, a natural product present in eelgrass, was found to have ability for preventing the attachment of some bacteria and barnacles. In this study, the antifouling ability of zosteric acid during the early stages of fouling was evaluated using attachment studies of fresh water bacteria. Simultaneously, various methods were sought for incorporating zosteric acid into silicone to prolong the release of the compound. The main results from this study were that zosteric acid exhibited anti-bacterial attachment regardless of whether it dispersed in water or incorporated into a coating. In addition, the release rate of zosteric acid from the incorporated coatings, particularly those where zosteric acid was uniformly dispersed with aggregates size of 4 microm or less, was orders of magnitude slower than those of previous reports. The release results indicate that the service life of our coatings could be far extended even with a small amount of zosteric acid incorporated.     

Flow analysis-vapor phase generation-Fourier transform infrared (FA-VPG-FTIR) spectrometric determination of nitrite

In this work, the coupling between flow analysis (FA)–vapor phase generation (VPG) and Fourier transform infrared spectrometry (FTIR) has been proposed as a novel and alternative strategy for the determination of nitrite. The analyte was transformed into the gaseous nitric oxide (NO) by on-line reaction with potassium iodide (KI) or ascorbic acid in acidic medium. The gaseous NO generated was transported by means of a N₂ gas carrier stream inside the IR gas cell and the corresponding FTIR spectrum was acquired in a continuous mode. The absorbance at 1876 cm⁻¹, corrected by a baseline established between 1879 and 1872 cm⁻¹ at a nominal resolution of 2 cm⁻¹, was selected as a measurement criterion. The effect of different spectroscopic and flow analysis experimental parameters, such as nominal resolution, number of scans, reducing agent and its concentration, acidic medium, reagents and sample flow rates, and the carrier gas flow rate on the analytical signal, and then in the figures of merit were initially evaluated by using a standard short path length (10 cm) IR gas cell. The optimization of the system was carried out by the univariate method. The main aims of this study were: (i) to investigate the on-line generation of gaseous nitric oxide in a continuous flow system, and (ii) the use of Fourier transform infrared spectrometry as an alternative and selective detector for the determination of nitrite. The proposed method was initially tested and applied for the determination of nitrite in samples with very high concentration of nitrite, such as frankfurters.     

Nuclear quadrupole resonance in 2,4-dinitrochlorobenzene

A study of the spin lattice relaxation (T₁) and the nuclear quadrupole resonance frequency (ν_Q) gives an important information about the dynamics of molecular groups in molecular solids. In the present paper, we analyze the contributions of the reorientational motion of nitro groups of 2,4-dinitrochlorobenzene to the NQR parameters of the chlorine nucleus in the molecule.

We found two contributions to T₁ and ν_Q due to the onset of the reorientation of nitro groups in the molecule; one of these contributions is mostly due to intermolecular effects in the crystal. For the chlorine nuclei, the efficiency of the modulation mechanism is usually provided by the change of the electric field gradient due to the moving molecular group; this gives us a way of how to assign each contribution to T₁ from the ortho and para positions of the NO₂ groups in the molecule. It is observed that there are two different potential barriers depending on the position of the nitro groups in the molecule. The behavior in the temperature dependence of the line width shows a thermal history dependence of the molecular crystal.     

4‐(2‐Hydroxyphenyl)‐2‐phenyl‐2,3‐dihydro‐1H‐1,5‐benzodiazepine and the 2‐(2,3‐dimethoxyphenyl)‐, 2‐(3,4‐dimethoxyphenyl)‐ and 2‐(2,5‐dimethoxyphenyl)‐substituted derivatives

The 1,5‐benzodiazepine ring system exhibits a puckered boat‐like conformation for all four title compounds [4‐(2‐hydroxyphenyl)‐2‐phenyl‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₁H₁₈N₂O, (I), 2‐(2,3‐dimethoxyphenyl)‐4‐(2‐hydroxyphenyl)‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₃H₂₂N₂O₃, (II), 2‐(3,4‐dimethoxyphenyl)‐4‐(2‐hydroxyphenyl)‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₃H₂₂N₂O₃, (III), and 2‐(2,5‐dimethoxyphenyl)‐4‐(2‐hydroxyphenyl)‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₃H₂₂N₂O₃, (IV)]. The stereochemical correlation of the two C₆ aromatic groups with respect to the benzodiazepine ring system is pseudo‐equatorial–equatorial for compounds (I) (the phenyl group), (II) (the 2,3‐dimethoxyphenyl group) and (III) (the 3,4‐dimethoxyphenyl group), while for (IV) (the 2,5‐dimethoxyphenyl group) the system is pseudo‐axial–equatorial. An intramolecular hydrogen bond between the hydroxyl OH group and a benzodiazepine N atom is present for all four compounds and defines a six‐membered ring, whose geometry is constant across the series. Although the molecular structures are similar, the supramolecular packing is different; compounds (I) and (IV) form chains, while (II) forms dimeric units and (III) displays a layered structure. The packing seems to depend on at least two factors: (i) the nature of the atoms defining the hydrogen bond and (ii) the number of intermolecular interactions of the types O—H...O, N—H...O, N—H...π(arene) or C—H...π(arene).