Total Dose Radiation Tolerance of Phase Change Memory Cell with GeSbTe Alloy

Phase change memory （PCM） cell array is fabricated by a standard complementary metal-oxide-semiconductor process and the subsequent special fabrication technique. A chalcogenide Ge2Sb2Te5 film in thickness 50hm deposited by rf magnetron sputtering is used as storage medium for the PCM cell. Large snap-back effect is observed in current-voltage characteristics, indicating the phase transition from an amorphous state （higher resistance state） to the crystalline state （lower resistance state）. The resistance of amorphous state is two orders of magnitude larger than that of the crystalline state from the resistance measurement, and the threshold current needed for phase transition of our fabricated PCM cell array is very low （only several μA）. An x-ray total dose radiation test is carried out on the PCM cell array and the results show that this kind of PCM cell has excellent total dose radiation tolerance with total dose up to 2 ×10^6 rad（Si）, which makes it attractive for space-based applications.     

膨胀的热夸克胶子物质的中等质量双轻子的增强

基于一个描述夸克胶子火柱演化的相对论流体力学模型,研究了夸克相、强子相互作用以及非热过程(DrellYan对、粲强子衰变)的中等质量双轻子的产生.发现由于相边对夸克胶子物质演化的影响和RHIC能量核碰撞产生的夸克胶子物质具有高的初始温度,夸克相对双轻子的贡献显著增强,比那些来自强子相互作用的贡献重要,甚至能与来自非热的贡献比较.表明中等质量双轻子的增强是一个在核碰撞中产生了夸克胶子物质的可能信号. 关键词： 夸克-胶子物质 双轻子增强 相对论流体力学模型     

Temperature dependence of interband transition energy in InGaAsN strain-compensated quantum-well and ridge-waveguide lasers fabricated with pulsed anodic oxidation

Ridge-waveguide InGaAsN triple-quantum-well strain-compensated lasers grown by metal organic chemical vapor deposition were fabricated with pulsed anodic oxidation. The laser’s output power reached 145 mW in continuous-wave mode at room temperature for a 4-?m -stripe-width laser. Continuous-wave single longitudinal mode operation was maintained at a high injection current level with a wavelength of 1287.3 nm at room temperature. Single longitudinal mode operation at 1317.2 nm was achieved at twice the threshold current at 100 °C. The band gap of InGaAsN in the quantum wells at different temperatures was calculated and compared to the measured temperature-dependent laser wavelength.     

Engineering issue study of triple harmonic method for in situ flying height analysis

In situ flying height testing technology is becoming more and more important in slider–disk interaction analysis and manufacturing quality control of disk drives and head-related components. Triple harmonic method is a quite promising choice for in situ flying height analysis, compared with other in situ methods reported up to now. This paper reports results of investigations on engineering issues of applying triple harmonic method for in situ flying height analysis. The paper reports results of analysis on the effects of various testing conditions on flying height testing repeatability and accuracy. Results suggest that working at reasonable high channel density and working on the ratio between third and first harmonics will be an advantage in terms of both flying height testing sensitivity and testing repeatability. Comparing with media thickness effect, the gap-length variation among different heads will be important if it is to study flying height difference among different heads and the testing is at high channel density. Also, it is suggested to work at AC erased track, in order to reduce the non-linearity caused by hard transition.     

新型金属杂冠醚配合物18-MC-6[Mn6(4-Amashz)6(DMF)6]·12DMF的合成

合成了一种新型金属杂冠醚配合物[Mn6(4-amashz)6(DMF)6]·12DMF,并用X射线衍射法对其结构进行了表征.研究了该化合物修饰金电极催化氧还原的性质,结果表明,该化合物具有平面碟状结构,对在碱性溶液中的氧有显著的催化还原作用.     

GA optimization on multi-segments muffler under space constraints

Whilst the space volume of muffler in noise control system is often constrained for maintenance in practical engineering work, the maximization on muffler’s performance becomes important and essential. In this paper, a novel approach genetic algorithms (GAs) based on the principles of natural biological evolution will be used to tackle this optimization of muffler design [M. Mitchell, An Introduction to Genetic Algorithms, The MIT Press, Cambridge, MA, 1996]. Here, the shape optimization of multi-segments muffler coupled with the GA searching technique is presented. The techniques of binary genetic algorithms (BGA) together with the commercial MATLAB package [G. Lindfield, J. Penny, Numerical Method Using Matlab, second ed., Prentice Hall, Englewood Cliffs, NJ, 2000] are applied in GA searching. In addition, a numerical case of pure tone elimination with 2-5 segments on muffler is introduced and fully discussed. To achieve the best optimization in GA, several GA parameters are on trial in various values. Results show that the GA operators, including crossover mutation and elitism, are essential in accuracy. Consequently, results verify that the optimal sound transmission loss at the designed frequency of 500 Hz is exactly maximized. The GA optimization on multi-segments muffler proposed in this study surely provides a quick and correct approach.     

海洋激光雷达测量海中悬移质

研制了一套采用倍频YAG激光器的小型海洋激光雷达，用于测量海中悬移质浓度，2000年8月28日至9月5日，该系统安装于“东方红Ⅱ”号右舷下甲板，在渤海海区进行海中悬移质浓度现场测量，通过对18个站位的海洋激光雷达数据分析，获得的表层悬移质浓度与同步测量的海中悬移质浓度结果吻合较好。     

Synthesis, Spectroscopy, and Electrochemistry of Metallophthalocyanines Substituted by Propylenedithiotetrathiafulvalene Derivatives

Zinc(II) and magnesium(II) phthalocyanines bearing four substituted propylenedithiotetrathiafulvalene (PDT-TTF) units were synthesized and characterized by NMR, MS, EA, and UV/VIS spectra. The absorption peaks of two target molecules were hypsochromically shifted compared with the phthalocyanine parent compound. Studies using cyclic voltammetry indicated that introduction of Zn and Mg as central metals enhanced the electronwithdrawing between the phthalocyanine core and the PDT-TTF unit, thus losing one electron to form (PDT-TTF)⁺ becomes more difficult.