Highly sensitive and selective amperometric sensors for nanomolar detection of iodate and periodate based on glassy carbon electrode modified with iridium oxide nanoparticles

Iridium oxide nanoparticles are grown on a glassy carbon electrode by electrodepositing method. The electrochemical behavior and electrocatalytic activity of modified electrode towards reduction of iodate and periodate are studied. The reductions of both ions occur at the unusual positive peak potential of 0.7 V vs. reference electrode. The modified electrode is employed successfully for iodate and periodates detection using cyclic voltammetry, hydrodynamic amperometry and flow injection analysis (FIA). In the performed experiments, flow injection amperometric determination of iodate and periodate yielded calibration curves with the following characteristics: linear dynamic range up to 100 and 80 μM, sensitivity of 140.9 and 150.6 nA μM⁻¹ and detection limits of 5 and 36 nM, respectively. The repeatability of the modified electrode for 21 injections of 1.5 μM of iodate solution is 1.5%. The interference effects of NO₂⁻, NO₃⁻, ClO₃⁻, BrO₃⁻, ClO₄⁻, SO₄²⁻, Cu²⁺, Zn²⁺, Mn²⁺, Mg²⁺, Cd²⁺, Ca²⁺, Na⁺, K⁺, NH₄⁺ and K⁺, CH₃COO⁻ and glucose were negligible at the concentration ratio of more than 1000. The obtained attractive analytical performance together with high selectivity and simplicity of the proposed method provide an effective and e novel modified electrode to develop an iodate and periodate sensor. Sensitivity, selectivity, the liner concentration range and the detection limit of the developed sensor are all much better than all known similar sensors in the literature for iodate and periodate determination.     

Vapor-Phase Alkylation of Phenol with Tert-butyl Alcohol Catalyzed by H3PO4/MCM-41

 The catalytic performance of Al-MCM-41 containing 5?5 wt% H3PO4 was studied for the vapor phase alkylation of phenol with tert-butyl alcohol (TBA) from 383 to 493 K. 4-Tert-butyl phenol was produced as the main product with moderate selectivity. The product distribution depends on the reaction temperature, number of acid sites, and the Br鰊sted to Lewis sites ratios. A lower molar ratio of reactants (TBA/phenol = 2) and a higher space velocity facilitated the production of 4-tert-butyl phenol. The influence of various parameters such as temperature, reactant feed molar ratio, feed rate, and time on stream were investigated for conversion yield and product selectivity.     

Mixed finite difference and Galerkin methods for solving Burgers equations using interpolating scaling functions

The current paper proposes a technique for the numerical solution of Burgers equations. The method is based on finite difference formula combined with the Galerkin method, which uses the interpolating scaling functions. Several test problems are given, and the numerical results are reported to show the accuracy and efficiency of the new algorithm. Copyright © 2013 John Wiley & Sons, Ltd.     

A spatio-temporal dynamic regression model for extreme wind speeds

This paper presents a hierarchical regression type model for analyzing the dependency of sample extremes on time, space and a covariate effect. The model is based on the assumption that the observations follow independently a generalized extreme value distribution given location, scale and shape parameters. Then a multivariate spatial process is considered to accommodate the association and spatial correlation in the distribution parameters. The mean of the process incorporates the underlying dynamics which is elaborated on the lower stage of hierarchy. Finally, three spatio-temporal dynamic linear models drive independently this mean function to take the variations in the parameters separately into account. In a Bayesian setting, the model structure leads to parallel implementation of the Markov chain Monte Carlo algorithm in a sense that it is less time consuming. Our methodology is applied to the monthly maxima of wind speed with temperature as a covariate for which the relationship is expressed in terms of a penalized spline regression model. The comparison of the proposed model with several simpler ones suggests considerable improvements in wind speed analysis.     

Rapid production of monodisperse cross-linked red blood corpuscle-like particles via scalable one-pot dispersion polymerization

Cross-linked polystyrene (PS) particles having red blood corpuscle (RBC)-like shape were synthesized by one-pot dispersion polymerization of styrene with ethanol/water mixture and ethylene glycol dimethacrylate (EGDMA) as the reaction medium and cross-linker, respectively. Monitoring of the reaction showed that RBC-like shape forms due to asymmetric shrinkage of a cross-linked network during the phase separation. In addition, three dimensional phase diagram was generated based on the yielded data that showed that the formation of such unique shape extremely depends on the polarity of the medium and injection time of the cross-linker. In situ synthesis of RBC-like particles, as promising biomaterials in targeted drug delivery and a model for the understanding of the cell behavior, via such fast and high solid content approach makes it to be conducive to subsequent scale up, i.e. potential commercial adoption.     

Palladium-catalyzed stereoselective synthesis of 3-(aminomethylene)-oxindoles

An efficient palladium-catalyzed protocol for the stereoselective synthesis of 3-(aminoarylmethylene)-oxindoles has been developed. In this approach, Ugi-4-component reaction adducts were used as starting materials for carbopalladative cyclization-Buchwald reaction sequences.     

Finding the efficiency score and RTS characteristic of DMUs by means of identifying the efficient frontier in DEA

Data envelopment analysis (DEA) is basically a linear programming based technique used for measuring the relative performance of organizational units, referred to as decision-making units (DMUs), where the presence of multiple inputs and outputs makes comparisons difficult. The ability of identifying frontier DMUs prior to the DEA calculation is of extreme importance to an effective and efficient DEA computation. In this paper, a method for identifying the efficient frontier is introduced. Then, the efficiency score and returns to scale (RTS) characteristic of DMUs will be produced by means of the equation of efficient frontier.     

Contribution of Diffuse Reflectance Spectroscopy to Monitoring the Synthesis Improvement of Encapsulated Complexes

Diffuse reflectance spectroscopy (DRS) can be regarded as a solid state technique contribution to monitoring the process of encapsulation of transition metal complexes into cavities of zeolites. By employing DRS, it was revealed that the effectiveness of a method suggested for higher encapsulation of a tris(bipyridine) cobalt(II) complex into zeolite Y can easily be manifested. In addition to that, simple diffuse reflectance spectra give information about a relative amount of two spin states of the cobalt bipyridine complexes and their alteration upon the method used.__________From Koordinatsionnaya Khimiya, Vol. 31, No. 8, 2005, pp. 618–620.Original English Text Copyright © 2005 by Zanjanchi, Tabatabaeian, Hosseinzadeh.This text was submitted by the authors in English.     

Preparation of conductive,flexible and transparent films by in situ deposition of polypyrrole nanoparticles on polyethylene terephthalate

In this study polypyrrole (PPy) nanoparticles were deposited as a thin film on the modified surface of polyethyleneterephthalate (PET) by in situ chemical polymerization in the presence of sodium dodecylsulfate (SDS), sodium dodecylbenzenesulfonate (DBSNa) and mixture of them as the surfactant. The surface of PET was modified by KOH before deposition and was investigated for conductivity and adhesion of PPy nanoparticles to PET. Resulting conductive flexible films were characterized by UV–Vis spectroscopy, fieldemission scanning electron microscopy, contact angle measurements and four-point-probe technique for conductivity. Direct morphological observation (FESEM) and electrical measurements indicated that the morphology, conductivity and the nature of deposited PPy films depend on surfactant, surface modification of PET and monomer concentration. In optimized process condition, uniform conductive films of PPy were obtained with good adhesion to PET.     

Magnetically nano core–shell Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@Cu(OH)<Subscript>x</Subscript>: a highly efficient and reusable catalyst for rapid and green reduction of nitro compounds

Magnetically separable nano core–shell Fe₃O₄@Cu(OH)_x with 22 % Cu content was prepared by the addition of sodium hydroxide to a mixture of CuCl₂·2H₂O and nano Fe₃O₄ in water. Characterization of the impregnated copper hydroxide was carried out by X-ray fluorescence (XRF), X-ray diffraction (XRD) atomic absorption spectroscopy (AAS), scanning electron microscopy (SEM), value stream mapping (VSM) and Brunauer–Emmett–Teller (BET) analysis. The core–shell nanocatalyst exhibited the excellent catalytic activity toward reduction of various nitro compounds to the corresponding amines with NaBH₄. All reactions were carried out in H₂O (55–60 °C) within 3–15 min to afford amines in high to excellent yields. Reusability of core–shell Cu(OH)_x catalyst was examined 9 times without significant loss of its catalytic activity.