Synthesis of β-cyclodextrin-lysozyme conjugates and their physicochemical and biochemical properties

Recently a great interest in the field of protein engineering and the design of innovative drug delivery systems employing specific ligands such as cyclodextrins is observed. The paper reports the solid state, thermal method for protein coupling with β-cyclodextrin and the physicochemical and biological properties of the obtained conjugates. The structure of the obtained conjugates was investigated via liquid chromatography-mass spectrometry, dynamic light scattering and circular dichroism analysis. The presented conjugates were biologically active and covalently bound β-cyclodextrin preserved the ability to form inclusion complexes with the model compound. This report demonstrates the great potential of cyclodextrin as a modifying unit that can be used to modulate the properties of therapeutic proteins, additionally giving such conjugates the possibility to transport many therapeutic substances in the form of inclusion complexes. In addition, the paper presents the potential of protein-cyclodextrin conjugates to construct innovative bioactive molecules for biological and medical applications.     

Spherical silica particles decorated with graphene oxide nanosheets as a new sorbent in inorganic trace analysis

Graphene oxide (GO) is a novel material with excellent adsorptive properties. However, the very small particles of GO can cause serious problems is solid-phase extraction (SPE) such as the high pressure in SPE system and the adsorbent loss through pores of frit. These problems can be overcome by covalently binding GO nanosheets to a support. In this paper, GO was covalently bonded to spherical silica by coupling the amino groups of spherical aminosilica and the carboxyl groups of GO (GO@SiO₂). The successful immobilization of GO nanosheets on the aminosilica was confirmed by scanning electron microscopy and X-ray photoelectron spectroscopy. The spherical particle covered by GO with crumpled silk wave-like carbon sheets are an ideal sorbent for SPE of metal ions. The wrinkled structure of the coating results in large surface area and a high extractive capacity. The adsorption bath experiment shows that Cu(II) and Pb(II) can be quantitatively adsorbed at pH 5.5 with maximum adsorption capacity of 6.0 and 13.6 mg g⁻¹, respectively. Such features of GO nanosheets as softness and flexibility allow achieving excellent contact with analyzed solution in flow-rate conditions. In consequence, the metal ions can be quantitatively preconcentrated from high volume of aqueous samples with excellent flow-rate. SPE column is very stable and several adsorption–elution cycles can be performed without any loss of adsorptive properties. The GO@SiO₂ was used for analysis of various water samples by flame atomic absorption spectrometry with excellent enrichment factors (200–250) and detection limits (0.084 and 0.27 ng mL⁻¹ for Cu(II) and Pb(II), respectively).     

Tautomerism, structure and properties of 1,1′,1″-(2,4,6-trihydroxybenzene-1,3,5-triyl)triethanone

According to computational predictions 1,1′,1″-(2,4,6-trihydroxybenzene-1,3,5-triyl)triethanone (triacetylphloroglucinol) (TTT, form a) can exist in five tautomeric forms, among which 2,4,6-tris(1-hydroxyethylidene)-1,3,5-cyclohexanetrione (form e) exhibits thermodynamic stability comparable to that of form a. X-ray investigations reveal that the compound exists in form a in the crystalline solid phase. Analysis of the arrangement of atoms involved in the three intramolecular H-bonds, responsible for the stabilization of tautomer a by 55.4 kcal/mol, suggests that there could be fast H atom (proton) transfer within the hydrogen bonds, bringing about the transformation of a into e and vice versa. Such an effect could explain the unique behaviour and spectral properties of TTT in solutions.     

Selective solid phase extraction of platinum on an ion imprinted polymers for its electrothermal atomic absorption spectrometric determination in environmental samples

An ion-imprinted polymer (IIP) was obtained by copolymerization of methacrylic acid (as a functional monomer) and ethylene glycol dimethacrylate (as a crosslinking agent) in the presence of various chelators for Pt(II) ion and using 2,2??-azo-bis-isobutyronitrile as the initiator. Specifically, acetaldehyde thiosemicarbazone (AcTSn) and benzaldehyde thiosemicarbazone (BnTSn) were used as chelators. The IIPs were applied as sorbents for solid-phase extraction of Pt(II) and Pt(IV) ions from aqueous solutions. The effects of acidity and flow rate of the sample, of elution conditions and of potentially interfering ions were investigated. The imprinting effect of analyte is clearly demonstrated by the fact that only the IIP is capable of quantitative retention of Pt(II) and Pt(IV) ions. The method works best in the pH range from 0.5 to 1 and from 3.5 to 9.5. The ions can be recovered with an acidic solution of thiourea. The Pt-AcTSn polymer displays better sorption properties for the separation of analytes. The selectivity coefficients of the Pt-AcTSn and control polymers for Pt(IV) in the presence Pd(II), Rh(III), Ru(III), Al(III) and Cu(II) were calculated, and the sorbent capacity for Pt(IV) was found to be 4.56???g?g?^-1. The method was successfully applied to the determination of Pt(IV) by electrothermal atomic absorption spectrometry in tap water, tunnel dust and anode slime samples.

Liquid chromatography tandem mass spectrometry with ion trap and triple quadrupole analyzers for determination of thyreostatic drugs in urine and muscle tissue

Liquid chromatography tandem mass spectrometry methods were developed and validated to screen for and confirm residues of the thyreostatic drugs: tapazole, thiouracil, methylthiouracil, propylthiouracil, and phenylthiouracil in bovine and porcine urine and muscle tissues using dimethylthiouracil as internal standard. Thyreostats were extracted from urine samples with diethyl ether after derivatisation with 3-iodobenzylbromide in basic medium (pH 8.0) and analyzed by gradient elution on a Nucleosil C18 column with ion trap mass spectrometry detection using an electrospray source and triple quadrupole MS detection with turbo spray source. Thyreostats were extracted from muscle tissue with methanol, the denaturation of matrix protein was performed and then the same steps as for the urine samples were carried out. The methods were validated in accordance with the Commission Decision 2002/657/EC. Good thyreostats recoveries were obtained (from 82% to 117%) as well as acceptable within-lab reproducibility. The values of the decision limit CCα and the detection capability CCβ of five thyreostatic drugs are found to be below the recommended concentration set at 10 μg L(-1) (kg(-1)). The results of the validation demonstrate that liquid chromatography mass spectrometry with ion trap detection does not meet the criteria for confirmation for some thyreostats and therefore was applied for screening purpose only.     

Self-organization of 1-methylnaphthalene on the surface of artificial snow grains: a combined experimental-computational approach

A combined experimental-computational approach was used to study the self-organization and microenvironment of 1-methylnaphthalene (1MN) deposited on the surface of artificial snow grains from vapors at 238 K. The specific surface area of this snow (1.1 × 10(4) cm(2) g(-1)), produced by spraying very fine droplets of pure water from a nebulizer into liquid nitrogen, was determined using valerophenone photochemistry to estimate the surface coverage by 1MN. Fluorescence spectroscopy at 77 K, in combination with molecular dynamics simulations, and density functional theory (DFT) and second-order coupled cluster (CC2) calculations, provided evidence for the occurrence of ground- and excited-state complexes (excimers) and other associates of 1MN on the snow grains' surface. Only weak excimer fluorescence was observed for a loading of 5 × 10(-6) mol kg(-1), which is ～2-3 orders of magnitude below monolayer coverage. However, the results indicate that the formation of excimers is favored at higher surface loadings (>5 × 10(-5) mol kg(-1)), albeit still being below monolayer coverage. The calculations of excited states of monomer and associated moieties suggested that a parallel-displaced arrangement is responsible for the excimer emission observed experimentally, although some other associations, such as T-shape dimer structures, which do not provide excimer emission, can still be relatively abundant at this surface concentration. The hydrophobic 1MN molecules, deposited on the ice surface, which is covered by a relatively flexible quasi-liquid layer at 238 K, are then assumed to be capable of dynamic motion resulting in the formation of energetically preferred associations to some extent. The environmental implications of organic compounds' deposition on snow grains and ice are discussed.     

Microporous {[Ni(cyclam)]3[W(CN)8]2}n affording reversible structural and magnetic conversions

Methanol adsorption into the porous 2D bimetallic coordination network {[Ni(cyclam)](3)[W(CN)(8)](2)}(n) (cyclam = 1,4,8,11-tetraazacyclotetradecane) causes significant modification of its structure and magnetic properties. Fully reversible transformations between the three states of the network: anhydrous, hydrated and methanol-modified are observed with the transition to the magnetic ordered state at T(c) equal to 4.9 K, 8.3 K and 11.4 K respectively. All three phases have a metamagnetic character but the methanol-modified one most easily turns to ferromagnetic and shows a hysteresis loop with coercivity field of 250 Oe. The differences in magnetic behaviour of the anhydrous and guest-induced forms of the compound are discussed in terms of changes in the structure: CN-bridge geometry and distance between the layers.     

Evaluation of 1‐arylpiperazine derivative of hydroxybenzamides as 5‐HT1A and 5‐HT7 serotonin receptor ligands: An experimental and molecular modeling approach

The synthesis and evaluation as 5‐HT_1A and 5‐HT₇ serotonin receptor ligands of the two sets of O‐substituted hydroxybenzamides, structurally related to 2‐{3‐[4‐(2‐methoxyphenyl)piperazin‐1‐yl]propoxy}benzamide ( 1 ), (K_i 5‐HT_1A = 21 nM, 5‐HT₇ = 234 nM) are reported. To affect the affinity for 5‐HT_1A and 5‐HT₇ receptors, an amide moiety ( 2 , 3 , 4 , 5 , 6 ) and a hydrocarbon chain length ( 7 , 8 , 9 , 10 ) were modified. The serotonergic activity of compounds 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 was generally higher in the case of 5‐HT_1A receptors compared with 5‐HT₇ ones; the most active 5‐HT_1A ligands being meta‐isomer 2 (K_i = 7 nM) and both analogs of 1 with the longest spacer, i.e., penta‐ and hexa‐methylene derivatives 9 and 10 (K_i = 4 and 3 nM, respectively). The observed biological properties of compounds 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 were elucidated using molecular modeling procedures. J. Heterocyclic Chem., (2010).     

The highly crosslinked dimethacrylic/divinylbenzene copolymers

The thermal stability of the ionic liquids (ILs) 1-n-butyl-3-methylimidazolium bromide, [BMIM]Br, and 1-n-octyl-3-methylimidazolium bromide, [OMIM]Br, was evaluated through thermogravimetry (TG). Long-term isothermal TG studies revealed that both of these ILs exhibit appreciable decomposition even at temperatures significantly lower than the onset decomposition temperature, previously determined from fast scan TG experiments. The long-term TG studies of both the ILs showed linear mass loss as a function of time at each temperature of 10 °C interval in the range 533–573 K over a period of 10 h. The kinetics of isothermal decomposition of ILs was analyzed using pseudo-zero-order rate expression. The activation energies for the isothermal decomposition of [BMIM]Br and [OMIM]Br under nitrogen atmosphere are 219.86 and 212.50 kJ mol⁻¹, respectively. The moisture absorption kinetics of these ILs at 25 °C and 30% relative humidity (RH) and at 85 °C and 85% RH were also studied. Water uptake of ILs exposed at 25 °C/30%RH follows a simple saturation behavior in agreement with Weibull model while that at 85 °C/85%RH fortuitously fit into the Henderson–Pabis model.     

Surface‐Plasmon‐Coupled Emission of Rhodamine 110 in a Silica Nanolayer

The first observation of strong directional surface‐plasmon‐coupled emission (SPCE) of Rhodamine 110 in silica nanofilms deposited on silver nanolayers is reported. The preparation of the material is described in detail. The intensity of SPCE exceeds 10 times that of free space fluorescence and total linear light polarization in the SPCE ring is observed. A new experimental setup and an original data collection method is presented. Our material completely preserves its fluorescence properties for at least eight months.