Interaction of Love waves with coupled cavity modes in a 2D holey phononic crystal

The interaction of Love waves with square array of pillars deposited on a cavity defined in a 2D holey phononic crystal is numerically investigated using Finite Element Method. First, the existence of SH surface modes is demonstrated separately for phononic crystals that consist of square arrayed holes, or rectangular arrayed Ni pillars, respectively in, or on, a SiO₂ film deposited on a ST-cut quartz substrate. The coupling between SH modes and torsional mode in pillars induces a transmission dip that occurs at a frequency located in the range of the band-gap of the holey phononic crystal. Second, a cavity is constructed by removing lines of holes in the holey phononic crystal and results in a transmission peak that matches the dip. The optimal geometrical parameters enable us to create a coupling of the cavity mode and the localized pillar mode by introducing lines of pillars into the cavity, which significantly improved the efficiency of the cavity without increasing the crystal size. The obtained results will pave the way to implement advanced designs of high-performance electroacoustic sensors based on coupling modes in phononic crystals.     

Second-order calibration of excitation-emission matrix fluorescence spectra for determination of glutathione in human plasma

A rapid non-separative spectroflourimetric method based on the second-order calibration of the excitation-emission data matrix was proposed for the determination of glutathione (GSH) in human plasma. In the phosphate buffer solution of pH 8.0 GSH reacts with ortho-phthaldehyde (OPA) to yield a fluorescent adduct with maximum fluorescence intensity at about 420 nm. To handle the interfering effects of the OPA adducts with aminothiols other than GSH in plasma as well as intrinsic fluorescence of human plasma, parallel factor (PARAFAC) analysis as an efficient three-way calibration method was employed. In addition, to model the indirect interfering effect of the plasma matrix, PARAFAC was coupled with standard addition method. The two-component PARAFAC modeling of the excitation-emission matrix fluorescence spectra accurately resolved the excitation and emission spectra of GSH, plasma (or plasma constituents). The concentration-related PARAFAC score of GSH represented a linear correlation with the concentration of added GSH, similar to that is obtained in simple standard addition method. Using this standard addition curve, the GSH level in plasma was found to be 6.10 ± 1.37 μmol L⁻¹. The accuracy of the method was investigated by analysis of the plasma samples spiked with 1.0 μmol L⁻¹ of GSH and a recovery of 97.5% was obtained.     

Simultaneous kinetic spectrophotometric determination of Cu(II), Co(II) and Ni(II) using partial least squares (PLS) regression

A partial least squares (PLS-1) calibration model based on kinetic—spectrophotometric measurement, for the simultaneous determination of Cu(II), Ni(II) and Co(II) ions is described. The method was based on the difference in the rate of the reaction between Co(II), Ni(II) and Cu(II) ions with 1-(2-pyridylazo)2-naphthol in a pH 5.8 buffer solution and in micellar media at 25°C. The absorption kinetic profiles of the solutions were monitored by measuring the absorbance at 570 nm at 2 s intervals during the time range of 0–10 min after initiation of the reaction. The experimental calibration matrix for the partial least squares (PLS-1) model was designed with 30 samples. The cross-validation method was used for selecting the number of factors. The results showed that simultaneous determination could be performed in the range 0.1-2 μg mL⁻¹ for each cation. The proposed method was successfully applied to the simultaneous determination of Cu(II), Ni(II) and Co(II) ions in water and in synthetic alloy samples.      

Hopf algebras of primitive Lie pseudogroups and Hopf cyclic cohomology

We associate to each infinite primitive Lie pseudogroup a Hopf algebra of ‘transverse symmetries,’ by refining a procedure due to Connes and the first author in the case of the general pseudogroup. The affiliated Hopf algebra can be viewed as a ‘quantum group’ counterpart of the infinite-dimensional primitive Lie algebra of the pseudogroup. It is first constructed via its action on the étale groupoid associated to the pseudogroup, and then realized as a bicrossed product of a universal enveloping algebra by a Hopf algebra of regular functions on a formal group. The bicrossed product structure allows to express its Hopf cyclic cohomology in terms of a bicocyclic bicomplex analogous to the Chevalley-Eilenberg complex. As an application, we compute the relative Hopf cyclic cohomology modulo the linear isotropy for the Hopf algebra of the general pseudogroup, and find explicit cocycle representatives for the universal Chern classes in Hopf cyclic cohomology. As another application, we determine all Hopf cyclic cohomology groups for the Hopf algebra associated to the pseudogroup of local diffeomorphisms of the line.     

Determination of Dioxins in Blood Using Nano-baskets Doped in Emulsion Liquid Membranes

Extraction of dioxins from blood samples was carried out by inclusion-facilitated emulsion liquid membrane process. The novelty of this work is the application of nano-baskets of calixarene and emulsion liquid membranes in the selective and efficient preconcentration of dioxin. For this aim, four derivatives of p-tert-calix[4]arene bearing different sulfonamide moieties were synthesized and their inclusion-extraction parameters were optimized including the calixarene's scaffold and concentration(as the carrier/demulsifier), the diluent type in membrane, the phase and the treat ratio, mixing speed, and initial solute concentration. Determinations were followed by a gas chromatograph and the results reveal that under the optimized operating conditions, the preconcentration of dioxins was improved and the method achieved lower limit of detections(LODs). Under optimal conditions, the figures of merits were determined to be LOD 1.0 pg/L, dynamic range 0.6―112.0 pg/L, RSD 5.5%(n=5), and the maximum enrichment factor and recovery were determined to be 3.3 and 99%, respectively.     

Determination of hydrate inhibitor in crude oil by nanoextraction-gas chromatography

This work focused on the quantitation of methanol as a hydrate inhibitor in crude oil. The novelty is nanoextraction of a polar compound from a complex non-polar matrix and selection of the proper fiber with maximum selectivity, loading percent, and lifetime. This approach not only does not require specific instrumentation, such as multiple columns and selective detectors, but also has eliminated the use of organic solvent and avoids the insertion of water inside the GC columns. The objective is optimization of extraction conditions, GC adjustments, and data processing. Experiments were conducted on the real sample of Iranian offshore crude oil by a carboxen/PDMS fiber via GC equipped with a cross-linked polyethylene glycol column and flame ionization detector. The results revealed that this fiber adsorbed the alcohols among other light non-polar compounds of crude oil. Moreover, the interference effects of ethanol were solved by proper selection of the thermal program. The LOD, LOQ, and linear range of this approach were determined to be 3.9, 12.9, and 14-229 ppm for methanol, respectively. Using the standard calibration and the standard addition methods, the relative errors of 1.6-7.2 and 5.3-14.0% were determined.     

Surface behavior, aggregation and phase separation of aqueous mixtures of dodecyl trimethylammonium bromide and sodium oligoarene sulfonates: the transition to polyelectrolyte/surfactant behavior

The properties and phase diagrams of aqueous mixtures of dodecyltrimethylammonium bromide (C(12)TAB) with the sodium oligoarene sulphonates (POSn), POS2, POS3, POS4, and POS6 have been studied using surface tension and neutron reflectometry to study the surface, and neutron small angle scattering and fluorescence to study the bulk solution. The behavior of POS2 and POS3 is reasonably consistent with mixed micelles of C(12)TAB and POSn-(C(12)TA)(n). These systems exhibit a single critical micelle concentration (CMC) at which the surface tension reaches the usual plateau. This is contrary to a recent report which suggests that the onset of the surface tension plateau does not coincide with the CMC. In the POS3 system, the micelles conform to the core-shell model, are slightly ellipsoidal, and have aggregation numbers in the range 70-100. In addition, the dissociation constant for ionization of the micelles is significantly lower than for free C(12)TAB micelles, indicating binding of the POS3 ion to the micelles. Estimation of the CMCs of the POSn-(C(12)TA)(n) from n = 1-3 assuming ideal mixing of the two component surfactants and the observed values of the mixed CMC gives values that are consistent with the nearest related gemini surfactant. The POS4 and POS6 systems are different. They both phase separate slowly to form a dilute and a concentrated (dense) phase. Fluorescence of POS4 has been used to show that the onset of aggregation of surfactant (critical aggregation concentration, CAC) occurs at the onset of the surface tension plateau and that, at the slightly higher concentration of the phase separation, the concentration of POS4 and C(12)TAB in the dilute phase is at or below its concentration at the CAC, that is, this is a clear case of complex coacervation. The surface layer of the C(12)TA ion in the surface tension plateau region, studied directly by neutron reflectometry, was found to be higher than a simple monolayer (observed for POS2 and POS3) for both the POS4 and POS6 systems. In POS6 this evolved after a few hours to a structure consisting of a monolayer with an attached subsurface bilayer, closely resembling that observed for one class of polyelectrolyte/surfactant mixtures. It is suggested that this structured layer, which must be present on the surface of the dilute phase of the coacervated system, is a thin wetting film of the dense phase. The close resemblance of the properties of the POS6 system to that of one large group of polyelectrolyte/surfactant mixtures shows that the surface behavior of oligoion/surfactant mixtures can quickly become representative of that of true polyelectrolyte/surfactant mixtures. In addition, the more precise characterization possible for the POS6 system identifies an unusual feature of the surface behavior of some polyelectrolyte/surfactant systems and that is that the surface tension can remain low and constant through a precipitation/coacervation region because of the characteristics of two phase wetting. The well-defined fixed charge distribution in POS6 also suggests that rigidity and charge separation are the factors that control whether a given system will exhibit a flat surface tension plateau or the alternative of a peak on the surface tension plateau.