Experimental and theoretical investigation of CO2 and air bubble rising velocity through kerosene and distilled water in bubble column

This paper concerns with developing of parameters which influence terminal velocities of air and CO₂ bubbles in distilled water and kerosene pools. The objective of this study is to validate and correct the formulas that were developed by previous investigators for prediction of terminal velocities. The investigation revealed that the terminal velocity of a single rigid spherical bubble in Newtonian fluids can be developed by balancing of mechanical forces acting on the bubble. However, for large bubbles, because of deforming of the bubble which is a result of interfacial tension, the effect of surface tension should be considered in the terminal velocity prediction formula. By using PSO algorithm and plotting experimental data of terminal velocity against the size of gas bubbles, the suitable equation for each of systems was chosen. Results showed that Jamialahmadi model is more practical for terminal velocity prediction. Jamialahmadi model requires a modification to be utilized for air-kerosene, CO₂-kerosene, air- distilled water and CO₂-distilled water systems. The developed PSO algorithm model is accurate for prediction of experimental data with an average R² value of 0.9722.     

Zinc polyoxometalate on activated carbon: an efficient catalyst for selective oxidation of alcohols with hydrogen peroxide

[PW₁₁ZnO₃₉]^5? was immobilized on activated carbon and characterized using Fourier transform infrared, X‐ray diffraction, Brunauer–Emmett–Teller and elemental analysis techniques. Effective oxidation of various alcohols with hydrogen peroxide was performed in the presence of this catalyst. Easy separation of the catalyst from the reaction mixture, cheapness, high activity and selectivity, stability as well as retained activity in subsequent catalytic cycles make this supported catalyst suitable for small‐scale synthesis. Copyright © 2015 John Wiley & Sons, Ltd.     

Exergetic and economic evaluation of a novel integrated system for trigeneration of power,refrigeration and freshwater using energy recovery in natural gas pressure reduction stations

Journal of Thermal Analysis and Calorimetry - Nowadays, with increasing energy consumption, global warming, and many problems caused by weather conditions, the tendency to use novel methods of...     

Synthesis and characterization of silica-coated magnetite nanoparticles modified with bis(pyrazolyl) triazine ruthenium(II) complex and the application of these nanoparticles as a highly efficient catalyst for the hydrogen transfer reduction of ketones

We present a facile and efficient method for modifying the surface of silica-coated Fe₃O₄ magnetic nanoparticles (MNPs) with bis(pyrazolyl) triazine ruthenium(II) complex [ MNPs@BPT–Ru (II) ] . Field emission-scanning electron microscopy, thermogravimetric/derivative thermogravimetry analysis, X-ray powder diffraction, Fourier-transform infrared spectroscopy, vibrating sample magnetometry, and energy-dispersive X-ray spectrometry analyses were employed for characterizing the structure of these nanoparticles. MNPs@BPT–Ru(II) nanoparticles proved to be a magnetic, reusable, and heterogeneous catalyst for the hydrogen transfer reduction of ketone derivatives. In addition, highly pure products were obtained with excellent yields in relatively short times in the presence of this catalyst. A comparison of this catalyst with those previously used for the hydrogen transfer reactions proved the uniqueness of MNPs@BPT–Ru(II) nanoparticle which is due to its inherent magnetic properties and large surface area. The presented method also had other advantages such as simple reaction conditions, eco-friendliness, high recovery ability, easy work-up, and low cost.     

Fabrication of the First Disposable Three‐dimensional Paper‐based Concentration Cell as Ammonia Sensor with a New Method for Paper Hydrophobization by Laser Patterned Parafilm®

A new, simple and low‐cost method for patterning hydrophobic barriers in porous support such as paper by Parafilm® has been introduced. This method is then used for electrochemical paper‐based ammonia sensor construction. Ammonia sensor is based on electrochemical concentration cell which ammonia reaction with electrolyte in halves cell caused in concentration gradient and therefore potential difference dependent on ammonia concentration. The effect of concentrations of the involved chemicals, time periods of the required processes, the presence of Faraday cage as well as the effects of different salts used in the salt bridge on the response of the sensor, were investigated in order to find the optimized conditions.     

Energy,exergy and pinch analyses of an integrated cryogenic natural gas process based on coupling of absorption–compression refrigeration system,organic Rankine cycle and solar parabolic trough collectors

Journal of Thermal Analysis and Calorimetry - The natural gas entering the liquefaction cycle usually consists of nitrogen, ethane, propane and also heavier hydrocarbons which are economically...     

Energetic and exergetic evaluation of methanol synthesis process in a hybridized system of methane cracking,chemical looping combustion,thermal desalination and photovoltaic panels

Journal of Thermal Analysis and Calorimetry - Due to limited energy supply sources and environmental issues, the use of renewable energy to replace fossil fuels and reduce pollution has increased....     

Synthesis,characterization, and application of a new tripodal ligand for the preparation of LSCF(6482) perovskite

The main aim of this paper was to study the effect of a new tripodal chelating agent on La_1?x Sr _x Co_1?y Fe _y O_3?δ perovskite prepared by the complexation method. For this purpose, a phenolic derivative of glycine (L) was synthesized applying the Mannich reaction and characterized by NMR and IR spectroscopies as well as by elemental analysis. To evaluate the complexation capability of L, its formation constants with the perovskite cations were measured. Comparison of these results with those reported for the complexaion with glycine, introduced L as a good candidate for the complexation with Fe(III) and La(III) cations. Furthermore, the powder XRD observations confirmed an improvement in the perovskite formation in the presence of L.     

Development of colorimetric sensor array for discrimination of herbal medicine

Today, traditional systems of medicines (such as herbal distillates) become important resources for providing healthcare benefits. The ability to discriminate among closely similar herbal products is critical to ensure their efficacy. This article proposes a pattern-based recognition approach for the rapid discrimination of herbal distillates using a low-cost and sensitive colorimetric sensor array composed of 25 indicators. The color changes of the sensor exposed to the vapor of the herbal distillates can be monitored easily with an ordinary flatbed scanner. The digital representation of the array response was analyzed with hierarchical clustering analysis (HCA) and principal component analysis (PCA). Using new variable selection strategy, 6 indicators among the 25 employed indicators were selected as discriminant elements of the array. So, a complete discrimination (with 100% accuracy) of 46 herbal distillates was achieved. The proposed sensor represented a better resolution when analytes were placed in an oven at 85 °C for 45 min. This colorimetric sensor array demonstrates excellent potential for quality assurance/control applications of herbal distillates.