Basis-independent potential energy curves for the neutral diatomics of Li,Na and K evaluated by means of Hartree-Fock and different density functional potentials

Summary The solution of the Schrödinger equation for diatomic molecules when the finite element method is used gives the possibility to evaluate highly accurate basis-independent potential energy curves. In this work such types of numerically accurate potential energy curves on the HF level have been evaluated for Li₂, Na₂ and K₂ and could be used as benchmarks in the optimization of basis sets. A comparison between recent LCAO HF calculations in which extended basis sets are used and the accurate values determined in this work show that there is a difference in total energy of 4×10^–5 and 10^–3 a.u. for Li, Li₂, and Na, Na₂, respectively. Evaluated dissociation energies are, however, due to the cancellation of numerical errors in much better agreement. Further, it is found that different exchange correlation potentials for the heavier molecules such as those given by von Barth-Hedin and Vosko, Wilk and Nusair reproduce experimental properties such as dissociation energies, vibrational frequencies almost as well as those achieved with advanced CI methods. TheX potential gives accurate bond lengths for Na₂ and K₂, whereas the dissociation energies are too small.     

Magnetic and structural properties of Cr1−tTitAs

The pseudobinary CrAsTiAs system has been investigated by X-ray and neutron diffraction and magnetic susceptibility measurements at temperatures between 10 and 1000 K. The phase diagram includes paramagnetic regions with the MnP-, NiAs-, and TiP-type structures and a low-temperature helimagnetic, MnP-type state for0.00 ≦ t ≦ 0.10 of Cr_1?tTi_tAs. The first-order para- to helimagnetic transition in Cr_1?tTi_tAs is accompanied by a hysteresis of 10–15 K. The results are discussed in relation to the findings for other Cr_1?tT_tAs(T =V, Mn, Fe, Co, Ni) andCrAs_1?xX_x (X = P, Sb, Se) phases.     

Determination of cholecalciferol (vitamin D3) in selected foods by liquid chromatography: NMKL collaborative study

Results are presented from an NMKL (Nordic Committee on Food Analysis) collaborative study of a method for the determination of cholecalciferol (vitamin D3) in foods. The method is based on the addition of an internal standard (vitamin D2), followed by saponification and extraction with n-heptane. The fraction that contains vitamin D2/D3 is separated by preparative normal-phase liquid chromatography (LC), and the analytes are determined by reversed-phase LC with UV detection at 265 nm. The method was tested by 8 participating laboratories. In this study 6 different matrixes were analyzed for cholecalciferol content: milk, liquid infant formula (gruel), cooking oil, margarine, infant formula, and fish oil. The contents varied from 0.4 to 12 microg/100 g. Three matrixes (milk, gruel, and margarine) were fortified with vitamin D3. In the other matrixes, vitamin D3 was added at 3 different levels at the Swedish National Food Administration. The milk was analyzed as a blind duplicate, whereas the other matrixes were analyzed as split-level pairs. The recoveries from the samples with vitamin D3 added varied from 93 to 102%. The repeatability relative standard deviation (RSDr) values for accepted results varied between 2.2% (fish oil) and 7.4% (cooking oil), whereas the reproducibility relative standard deviation (RSD(R)) values varied between 6.8% (margarine) and 24% (cooking oil).     

Direct determination of the complete set of iron normal modes in a porphyrin-imidazole model for carbonmonoxy-heme proteins: [Fe(TPP)(CO)(1-MeIm)

Detailed Fe vibrational spectra have been obtained for the heme model complex [Fe(TPP)(CO)(1-MeIm)] using a new, highly selective and quantitative technique, Nuclear Resonance Vibrational Spectroscopy (NRVS). This spectroscopy measures the complete vibrational density of states for iron atoms, from which normal modes can be calculated via refinement of the force constants. These data and mode assignments can reveal previously undetected vibrations and are useful for validating predictions based on optical spectroscopies and density functional theory, for example. Vibrational modes of the iron porphyrin-imidazole compound [Fe(TPP)(CO)(1-MeIm)] have been determined by refining normal mode calculations to NRVS data obtained at an X-ray synchrotron source. Iron dynamics of this compound, which serves as a useful model for the active site in the six-coordinate heme protein, carbonmonoxy-myoglobin, are discussed in relation to recently determined dynamics of a five-coordinate deoxy-myoglobin model, [Fe(TPP)(2-MeHIm)]. For the first time in a six-coordinate heme system, the iron-imidazole stretch mode has been observed, at 226 cm(-)(1). The heme in-plane modes with large contributions from the nu(42), nu(49), nu(50), and nu(53) modes of the core porphyrin are identified. In general, the iron modes can be attributed to coupling with the porphyrin core, the CO ligand, the imidazole ring, and/or the phenyl rings. Other significant findings are the observation that the porphyrin ring peripheral substituents are strongly coupled to the iron doming mode and that the Fe-C-O tilting and bending modes are related by a negative interaction force constant.     

Relativistic symmetry orbitals for the double groups C2v,C∞v,D∞h,and Oh

Relativistic symmetry orbitals are given for molecular LCAO calculations for the double groups: C_2v, C_∞v, D_∞h, and O_h (6-fold) coordination. The atomic orbitals used in the LCAO are of the four component form. A discussion of the comparison between nonre ativistic and relativistic molecular eigenvalues is presented.     

Kinetics of biodesulfurization of a high-sulfur coal

The apparent activation and deactivation energies and the corresponding frequency factors of coal desulfurization byThiobacillus ferrooxidans have been determined to be ΔE _a = 60.9 kJ,A _a = 1.45 s^-1 and ΔE_d = 178.3 kJ,A _d = 5.65×10²⁷ s^-1, respectively. The thermo-dynamic values (AG^?, ΔH ^?, and ΔS^?) of the activated complex were calculated. Kinetic parameters of the Monod equation were determined to beV _m = 55.9 mg dm^-3 h^-1 andK = 24.1% pulp density. The maximum rate of desulfurization of coal was found to beV _m = 55.7 mg dm^-3 h^-1 for the particle size. The generalized second order regression equation relating the yield of desulfurization to the leaching parameters was shown to adequately predict coal extraction data and optimum values of process variables. Tank leaching studies using optimum conditions resulted coal desulfurization about 90%. The iron hydrolysis reactions involving the formation of mono- and poly-nuclear, hydroxo- and sulfato complexes of amorphous and crystalline precipitates were discussed.     

Expedient protocol for solid-phase synthesis of secondary and tertiary amines

[reaction: see text] An expedient solid-phase synthetic approach to secondary and tertiary amines was developed. The protocol employs conversion of resin-bound amino alcohols to the corresponding iodides, followed by iodide displacement with primary or secondary amines or with unprotected amino alcohols. This two-step procedure, affording products in good to excellent yields, is suitable for solid-phase synthesis of polyamines.     

Stereochemistry of intramolecular Diels-Alder furan (IMDAF) reactions of furyl-substituted chiral ethanolamides

This paper describes the stereoselective outcome of the intramolecular Diels-Alder furan (IMDAF) reaction of substituted (2S,3S)-ethanolamides 9-13, which were synthesised from a furyl substituted cyanohydrin. The latter was obtained from 2-furaldehyde with high enantioselectivity by an oxynitrilase catalysed addition of hydrogen cyanide. The stereochemistry of the IMDAF products was shown to be dependent on the size of the ethanolamide substituents R. Small substituents (H, Me, CN) gave exclusively exo-cycloaddition, whereas more bulky ones (Ph, Et) gave both evo- and endo-addition, the larger phenyl substituent giving a high endo-exo-ratio.     

Electrocatalytic oxidation of reduced nicotinamide coenzymes by graphite electrodes modified with an adsorbed phenoxazinium salt,meldola blue

Meldola Blue (7-dimethylamino-1,2-benzophenoxazine) can be adsorbed on graphite to give chemically modified electrodes. The electrochemical redox reactions of the phenoxazine are fairly reversible at low coverages with an E′^o of ?175 mV vs. SCE at pH 7.0. The electrode was most stable in acid solutions, at pH 6.0 its electrochemical activity decreased by 15% during 2h. The adsorbed compound mediated electron transfer in the electrocatalytic oxidation of the nicotinamide coenzymes (NADH and NADPH). The formation of a charge transfer complex between Meldola Blue and the coenzyme is demonstrated by experiments with a rotating disk electrode. The complex decomposes in a rate limiting step (k₊₂=30 s^?1) to the oxidized coenzyme and the reduced Meldola Blue. The latter can be reoxidized in a fast electrochemical step. The overall result is an electrocatalytic oxidation at a voltage which is about 500 mV lower than at an unmodified electrode.     

Efforts to expand the genetic alphabet: identification of a replicable unnatural DNA self-pair

Six unnatural nucleotides featuring fluorine-substituted phenyl nucleobase analogues have been synthesized, incorporated into DNA, and characterized in terms of the structure and replication properties of the self-pairs they form. Each unnatural self-pair is accommodated in B-form DNA without detectable structural perturbation, and all are thermally stable and selective to roughly the same degree. Furthermore, the efficiency of polymerase-mediated mispair synthesis is similar for each unnatural nucleotide in the template. In contrast, the efficiency of polymerase-mediated self-pair extension is highly dependent on the specific fluorine substitution pattern. The most promising unnatural base pair candidate of this series is the 3-fluorobenzene self-pair, which is replicated with reasonable efficiency and selectivity.