Aromatic compounds produced by endophytic fungi isolated from red alga Asparagopsis taxiformis - Falkenbergia stage

Endophytic fungi were isolated from red alga Asparagopsis taxiformis - Falkenbergia stage, collected from the Brazilian coast, and were identified as Annulohypoxylon stygium (AT-03) and A. yungensis (AT-06) based on their macro/micromorphological and molecular features. Bioassay-guided fractionation of the EtOAc extract from laboratory cultures of both strains yielded known compounds pyrogallol from A. stygium, (3R)-scytalone and (3R,4R)-4-hydroxy-scytalone from A. yungensis. Pyrogallol was active against methicillin-resistant Staphylococcus aureus (MRSA) and Escherichia coli strains. An inactive fraction from A. stygium afforded two additional compounds, (3R,4R)-3,4,5-trihydroxy-1-tetralone and tyrosol. Optically active compounds had their stereochemistry determined by circular dichroism (CD) spectroscopy.     

Development and validation of a bioanalytical method by LC‐MS/MS for the quantification of the LAFIS 10 – an antimalarial candidate – and its pharmacokinetics first evaluation

A rapid and highly sensitive method by LC‐MS/MS was developed and validated for the quantification of an antimalarial candidate (LAFIS10) in rat plasma using dexamethasone as internal standard (IS). The chromatographic separation was performed with a Poroshell 120 EC‐C₁₈ column. The mobile phase consisted of water (A) and acetonitrile (B), both containing 10 m m of ammonium formate and 0.1% formic acid, delivered in the form of elution gradient. The LAFIS10 was monitored using an electrospray ionization interface operating in the positive mode in multiple reaction monitoring mode, monitoring the transitions 681.47 → 538.2 for LAFIS10 and 393.20 → 355.30 for the IS. The flow rate was 500 μL/min. The column temperature was kept at 40 °C and the injection volume was 2 μL. The lower limit of quantification was of 10 ng/mL and linearity between 10 and 1000 ng/mL was observed, with an R² > 0.99. The accuracy of the method was >90%. The relative standard deviations intra‐ and interday were <8.80 and <6.37%, respectively. The method showed sensitivity, linearity, precision, accuracy and selectivity required to quantify LAFIS 10 in preclinical pharmacokinetic studies according to criteria established by the US Food and Drug Administration and European Medicines Agency. Copyright © 2014 John Wiley & Sons, Ltd.     

Catalytic degradation of polyethylene evaluated by TG

HZSM-5 zeolite was screened as catalyst for high density polyethylene degradation at 450C, under nitrogen static atmosphere. Two different samples were studied in this condition: HDPE alone and mixed with HZSM-5. The reactor was connected on line to an HP 5890-II gas Chromatograph. Sample degradation was investigated using a Perkin-Elmer Delta 7 Thermobalance, from room temperature to 800C, with heating rates of 5.0, 10.0 and 20.0C min^–1. From TG curves, the activation energies, calculated using an integral kinetic method, decreased 60.6% in the presence of the zeolite.This work was supported by Conselho Nacional de Desenvolvimento Cientifico e Tecnológico (CNPq) and CoordenaÇÃo de Apoio ao Pessoal de Ensino Superior (CAPES).     

Comparison of direct solid sampling and slurry sampling for the determination of cadmium in wheat flour by electrothermal atomic absorption spectrometry

Two analytical methods for the determination of cadmium in wheat flour by electrothermal atomic absorption spectrometry without prior sample digestion have been compared: direct solid sampling analysis (SS) and slurry sampling (SlS). Besides the conventional modifier mixture of palladium and magnesium nitrates (10 μg Pd + 3 μg Mg), 0.05% (v/v) Triton X-100 has been added to improve the penetration of the modifier solution into the solid sample, and 0.1% H₂O₂ in order to promote an in situ digestion for SS. For SlS, 30 μg Pd, 12 μg Mg and 0.05% (v/v) Triton X-100 have been used as the modifier mixture. Under these conditions, and using a pyrolysis temperature of 800 °C, essentially no background absorption was observed with an atomization temperature of 1600 °C. About 2 mg of sample have been typically used for SS, although as much as 3-5 mg could have been introduced. In the case of SlS multiple injections had to be used to achieve the sensitivity required for this determination. Calibration against aqueous standards was feasible for both methods. The characteristic mass obtained with SS was 0.6 pg, and that with SlS was 1.0 pg. The limits of detection were 0.4 and 0.7 ng g⁻¹, the limits of quantification were 1.3 and 2.3 ng g⁻¹ and the relative standard deviation (n = 5) was 6-16% and 9-23% for SS and SlS, respectively. The accuracy was confirmed by the analysis of certified reference materials. The two methods were applied for the determination of cadmium in six wheat flour samples acquired in supermarkets of different Brazilian cities. The cadmium content varied between 8.9 ± 0.5 and 13 ± 2 ng g⁻¹ (n = 5). Direct SS gave results similar to those obtained with SlS using multi-injections; the values of both techniques showed no statistically significant difference at the 95% confidence level. Direct SS was finally adopted as the method of choice, due to its greater simplicity, the faster speed of analysis and the better figures of merit.     

Effect of temperature and pH on the aggregation and the surface hydrophobicity of bovine κ-casein

κ-Casein (κ-CN) aggregation by heating has been studied at pH 7.2 and 5.2 using UV-visible spectrophotometry, sodium dodecyl sulfate polyacrylamide gel electrophoresis, spectrofluorometric study of the 1–8 aniline naphtalene sulfonate (ANS)–κ-CN binding and circular dichroism (CD) spectroscopy. The aggregation process to form aggregates like micelles or submicelles and the structural characteristics of these aggregates were pH dependent. Far-UV CD showed that the aggregates obtained by heating presented changes in the κ-CN secondary structure. Near-UV CD spectra showed a certain degree of tertiary organization in the Tyr environment for the protein heated or unheated, only at pH 5.2. ANS binding at both pH was quite different and depends on the self-association process. Heating produced exposition of hydrophobic binding sites only at pH 7.2, including those in the neighborhood of the κ-CN Trp residue.     

Degradation behavior and kinetic study of ABS polymer

The degradation kinetics of the ABS terpolymer (acrylonitrile-butadiene-styrene) was investigated by means of thermogravimetric analysis. The samples were heated from 30 to 900°C in nitrogen atmosphere applying three different heating rates: 5, 10 and 20°C min⁻¹. The Vyazovkin model-free kinetic method was used to calculate the activation energy (E) of the degradation process as a function of conversion and temperature. Between 20 and 80% of conversion, E was calculated and the figures were: for ABS GP, E is 204.5±11.5 kJ mol⁻¹ (medium value); for ABS HI, E is 239.0±9.8 kJ mol⁻¹; for ABS HH, E is 242.4±5.4 kJ mol⁻¹.     

Microwave Effects Due to Anionic or Cationic Initiators in Emulsion Polymerization Reactions

Summary: Emulsion polymerization reactions were performed under microwave irradiation and conventional heating using anionic or cationic initiators and surfactants. Microwave irradiation promoted higher reaction rates for both initiators and surfactants, in comparison with the conventional heating. The effect of high power microwave irradiation was studied using a method of cycles of heating and cooling, where rapid polymerization reactions were obtained. In the reactions with anionic initiator and surfactant, a decrease in the particle diameters was observed with microwave heating, and even smaller particles were obtained using high power microwave irradiation. Moreover, the decrease in the particle size was acompanied by an increase in the polymer molecular weight. On the other hand, these effects were not observed for reactions with cationic initiator and surfactant.     

HUMANN-based system to identify benzimidazole fungicides using multi-synchronous fluorescence spectra: An ensemble approach

In this paper, we approach, using neural computation and ensemble systems, a pattern classification problem in fluorescence spectrometry, the resolution of difficult multi-fungicide mixtures (overlapping), specifically the benzimidazole fungicides, benomyl, carbendazim, thiabendazole and fuberidazole. These fungicides are compounds of an important environmental interest. Because of this, from an analytical point of view, it is interesting to develop sensitive, selective and simple methods for their determination. Fluorescence spectrometry has proven to be a sensitive and selective technique for determination of many compounds of environmental interest, but in some cases it is not enough. HUMANN is a hierarchical, unsupervised, modular, adaptive neural net with high biological plausibility, which has shown to be suitable for identification of these fungicides and organochlorinated compounds of environmental interest. We propose two modular artificial intelligent systems, with a structure of pre-processing and processing stage, a multi-input HUMANN-based system, using multi-fluorescence spectra as input to the system, and a HUMANN-ensemble system. We analyze the optimal configuration of inputs and the ensemble in order to obtain better results. We study such figures as precision and sensitivity of the method. Our proposal is a smart, flexible and effective complementary method, which allows reducing the analytical and/or computational complexity of the analysis. Figure Stages in identification of benzimidazole fungicides Based on a contribution presented at the XIII International Symposium on Luminescence Spectrometry held in Bologna, Italy from Sept. 7–11, 2008.     

Temperature and pressure effects on zeta potential values of reservoir minerals

An experimental study of the effect of temperature and pressure on zeta potential of typical reservoir minerals, including quartz, kaolinite, and calcite, is presented. Experiments included the design and construction of an electrophoretic cell for zeta potential measurements at variable pressure and temperature. Electrolyte concentration was varied in the range from 0.0001 to 0.1 M in the pH range from 2 to 9. For all the minerals it is found that the zeta potential decreases with temperature at a rate characteristic of each mineral; values are around -2.3 mV/degrees C for quartz, -0.96 mV/degrees C for kaolinite, and -2.1 mV/degrees C for calcite for pressure values less than 45 psi. The effect of pressure is found to depend on the mineral nature and pH of the electrolytic solution. In the case of quartz, a systematic increase in the value of the zeta potential with pressure is observed, whereas a decreasing trend is measured for the kaolinite. In the case of calcite, a decreasing trend is observed for pressures up to 45 psi, whereas the experimental data suggest an increasing trend for higher pressure values.