New film-forming poly(urethane-amide-imide) block copolymers: influence of soft block on membrane properties for the purification of a fuel octane enhancer by pervaporation

A new family of eight poly(urethane-amide-imide) (PUAI) block copolymers with the same hard block and different soft blocks were synthesized in two steps from a dianhydride monomer containing amide functions (4,4′-methylene-bis(trimellitic anhydride-N-phenylamide)) and α,ω-dihydroxy telechelic oligomers which varied in both chemical structure (polyethers: PEG, PTMG, PPG; polyester: PCL) and molar weight (MW ≅ 600 or 1000 g/mol). The PUAI were obtained in high yields (ranging from 81 to 98 wt%) and with reduced viscosities which varied from 0.36 to 0.84 dL/g (for C = 1 mg/mL in DMF at 25 °C). Their characterization by FTIR and ¹H NMR fully confirmed their chemical structure. Their solubility was typically limited to a few wt/vol% even in strong apolar diprotic solvents like DMF and NMP. This particular feature showed the very strong physical cross-linking of their very stiff hard block and enabled to cast membranes capable of withstanding exposure to many common organic solvents. Systematic permeability experiments showed that the PUAI membranes could be used to separate the azeotropic mixture EtOH (20 wt%)/ETBE very easily, with interesting prospects for the purification of ETBE (a fuel octane enhancer used instead of lead derivatives in the European Community). An analysis in terms of structure-property relationships pointed out that the soft block molar weight and polarity were two key parameters for the optimization of selective permeability. The best compromise was obtained with the soft block PEG1000. The corresponding polymer led to performances so far outstanding for polyamideimides with a very high flux of more than 1.1 kg/h m² for a normalized thickness of 5 μm at 50 °C and a selectivity α = 22.7 in the high range for this kind of separation.     

Evidence for an unstable Bi(II) radical from Bi-O bond homolysis. Implications in the rate-determining step of the SOHIO process

The reaction of BiCl(3) with the lithium salt of o-di-tert-butylphenol under nitrogen forms organic oxidation products rather than the expected Bi(OAr)(3) complex, and bismuth disproportionation products. Likewise, the decomposition of Bi(III) aryloxides Bi(O-2,6-(i)Pr(2)C(6)H(3))(3) and ClBi(O-2,4,6-(t)Bu(3)C(6)H(2))(3) leads to corresponding organic oxidation products. These reactions can be explained by Bi-O bond homolysis to form unstable Bi(II) radicals, analogous to a fundamental step suggested to intervene in the SOHIO process.     

Stereospecific synthesis of enamines from α,β-epoxysilanes

Isomerically pure cis and trans enamines were prepared from α,β-epoxysilanes by alumina-assisted ring opening with pyrrolidine and morpholine followed by β-elimination.     

Comparative analysis by gas chromatography-mass spectrometry of the essential oils from bark and leaves of Cedrelopsis grevei Baill, an aromatic and medicinal plant from Madagascar

The essential oils from bark and leaves of Cedrelopsis grevei Baill (Ptaeroxylaceae), an aromatic and medicinal plant from Madagascar, are widely used in folk medicine. These two commercially available oils have been examined separately by means of GC-MS. The oil constituents were identified according to their mass spectra and their relative retention indices determined on both polar and non-polar stationary phase capillary columns. A total of 55 compounds have been identified constituting 76.7% (bark) and 91.6% (leaves) of the volatile constituents. Both oils were found to have a similar composition; however the relative percentages of some compounds notably differed. The bark essential oil contained beta-pinene (17.1%), cis-sesquisabinene hydrate (12.8%) and caryophyllene oxide (7.0%) as the main components whereas the leaf essential oil was largely dominated by trans-beta-farnesene (35.6%); beta-pinene (12.8%), cis-sesquisabinene hydrate (9.8%) and ar-curcumene (8.6%) were also present as major components. As far as we know, this is the first report on the Cedrelopsis grevei bark and leaf essential oils which therapeutic properties may be attractive for aromatherapy.     

Additives for the stabilization of double-stranded DNA in UV-MALDI MS

Molecular complexes such as double-stranded oligonucleotides contain non-covalent bonds that are difficult to maintain in the MALDI experiment. Quantifiers are introduced in order to evaluate, summarize, and compare spectra from experiments in which additives are used to stabilize duplex oligonucleotides. Compounds known to complex with and stabilize duplex molecules can be useful as additives in MALDI. Spermine and methylene blue, present at concentrations similar to the matrix, are detected, bound to the duplex. When peptides are used as additives, the duplex is stabilized when the peptide is present at an amount less than that of the duplex.     

Ozonation of pyrene and benzo[a]pyrene in silica and soil –14C-mass balances and chemical analysis of oxidation products as a first step to ecotoxicological evaluation

Ozonation of polycyclic aromatic hydrocarbons (PAHs) in soil is a process that can be used for in-situ soil remediation or in combination with bioremediation techniques. First steps to a comprehensive ecotoxicological evaluation of this method is done by ozonation of radioactively labeled (¹⁴C) pyrene and benzo[a]pyrene in a silty soil (LUFA 2.2) under mass-balancing conditions and GC-MS analysis of aromatic ozonation products. ¹⁴C-Mass-balances for pyrene and benzo[a]pyrene (b[a]p) in soil showed that, apart from ¹⁴CO₂ formation, considerable percentages of both PAHs are oxidized to water soluble substances (20–30%) or to non-extractable or bound residues (10% for pyrene, 30% for b[a]p). TLC and GC-MS analysis of ozonation products extractable from artificially contaminated silica and soil by organic solvents revealed a large number of aromatic substances. PAH-quinones and ten ring fission products with formyl- and carboxy-groups of both pyrene and b[a]p could be identified.     

The scope of catalytic enantioselective tandem carbonyl ylide formation-intramolecular [3 + 2] cycloadditions

Catalytic enantioselective tandem carbonyl ylide formation-intramolecular 1,3-dipolar cycloaddition reactions of 2-diazo-3,6-diketoesters show promising scope in terms of asymmetric induction as the tethered alkene/alkyne dipolarophile component is varied. Cycloadditions were found to occur in moderate to very good yields, with a difference in ee exhibited by the electronically different 2-diazo-3,6-diketoesters 1, 25 and 33, 34. Values for ee of up to 90% for alkene dipolarophiles and up to 86% for alkyne dipolarophiles were obtained.     

Characterisation and proposed origin of mass spectrometric ions observed 30 Th above the ionised molecules of per-O-methylated carbohydrates

Derivatisation of carbohydrates by permethylation significantly improves the mass spectrometric intensity of carbohydrate-derived ions and allows more readily interpretable fragmentation; in addition, samples are conveniently separated from salts, and larger oligosaccharides are more readily ionised. It has previously been recognised that, in the mass spectra of permethylated carbohydrates, a series of ions indicating species 30 Da larger than the fully methylated carbohydrate molecules are also observed. These species have not been characterised in the literature despite their apparently ubiquitous occurrence in the mass spectra of permethylated carbohydrates. Tandem mass spectrometry (MS/MS) experiments were performed on permethylated carbohydrates and reduced permethylated carbohydrates that exhibit the artefact, demonstrating that the artefact is not reducing terminal specific, and that the artefact can be introduced at any hydroxyl residue. It was further demonstrated through the use of different alkylation reagents that the origin of this artefact group is the alkylating reagent itself. It is proposed that side reactions that occur between the permethylation reagents allow the production of small amounts of iodomethyl methyl ether. This reagent can then compete with methyl iodide for reaction with the carbohydrate -OH groups. The result is partial incorporation of a methoxymethyl moiety instead of a methyl group, detected as '+30' artefact ions.     

Insight into the reactivity of olefins in the Pauson-Khand reaction

The reactivity of different Co(2)(CO)(6)-acetylene complexes in the Pauson-Khand reaction is strongly dependent on the nature of the olefin. Theoretical calculations at both the DFT and ONIOM levels are concordant with experimental observations and suggest how the olefin-cobalt interactions in the complex could have a major effect on the relative reactivity of the olefins. This study rationalizes for the first time the experimentally observed reactivity differences of cyclohexene, cyclopentene, and norbornene.