偶氮侧基聚合物光致异构动力学研究

本文对偶氮侧基聚合物相位共轭光时间特性进行了研究,得到了相位共扼光产生机制─光致异构过程的时间常数.在相位共轭光上升阶段,其时间常数在0.4～0.5s之间,在相让共轭光的衰减过程,衰减满足双指数关系,分段拟合得到较好的结果,且得到快过程的时间常数为0.27s,慢过程的时间常数为0.78s.     

XeF和KrF的热催化合成及KrF在含氟高能氧化剂NFBF合成中的应用

本文介绍了一种以氟气和惰性气体为原料合成 Kr F2 和 Xe F2 的热催化合成方法并对合成机理和条件作了简单的讨论 ,利用合成的 Kr F2 作为氟化剂合成了含氟高能氧化剂 NF4BF4,纯度约为 93%,其红外光谱和拉曼光谱基本与文献值吻合。元素分析结果表明产品 NF4BF4中含 B5.8%(mass) ,自由氟原子含量为 9.95%(mass) ,与理论值基本一致 ,此结果也间接证明了 Kr F2 质量的可靠性。粉末状的 Xe F2 经升华 -再结晶纯化后可得纯净晶体产品。     

A Novel Cu-Mo／ZSM-5 Catalyst for NOx Catalytic Reduction with Ammonia

The Cu-Mo/ZSM-5 catalysts with different Cu/Mo ratios were prepared by wet impregnation method, and their catalytic performance for selective catalytic reduction of NOx was studied. The results showed that Cu-Mo/ZSM-5 is a very effective catalyst for NOx catalytic reduction with ammonia, especially when Cu/Mo molar ratio is about 1.5. It not only exhibited the extremely high catalytic activity, but also showed good stability for 02. The bulk phase structure of Cu-Mo/ZSM-5 catalysts was determined by XRD technique, and the results indicated that there is a maximum dispersion for Cu species when Cu/Mo molar ratio is 1.5, and an interaction between Cu and Mo along with HZSM-5 may be present in Cu-Mo/ZSM-5, which may possibly result in a special structure favorable for the catalytic reduction of NOx over Cu-Mo/ZSM-5 catalyst.     

Durch Bromierung ausgelöste Umlagerung tertiärer Allylalkohole: Der Einfluss eines Fluor-Substituenten auf Reaktionsgeschwindigkeit und Reaktionsverlauf

Rearrangement of Tertiary Allyl Alcohols Induced by Bromination: The Effect of a Fluorine Substituent on the Rate and the Outcome of the Reaction The allyl alcohol bearing a methyl and a t-butyl group at the hydroxylated position was found to undergo a rearrangement when treated with bromine (or N-bromosuccinimide) in an aqueous medium and to afford a product mixture containing two regioisomeric ketones and one oxirane. Introduction of an additional methyl group or a fluorine atom at the non-terminal olefinic center led to a more selective discrimination between potential migratory groups. As the result of an exclusive t-butyl shift only one product, a ketone, was formed in both cases. Whereas the reaction rate was only slightly affected by the additional methyl group, it was substantially decreased by the fluorine atom.     

Thermal Decomposition Characteristics of 1,7-Diazido-2,4,6-trinitrazaheptane and its Application in Propellants

The thermal decomposition characteristics of1,7-diazido-2,4,6-trinitrazaheptane (DATH) and multi-component systems containing DATH were studied by using DSC, TG and DTG techniques. Three –NO₂ groups in the DATH molecule break away first from the main chain when DATH is heated up to 200°C. Following this process, the azido groups and the residual molecule decompose rapidly to release a great deal of heat within a short time. In the multi-component systems, DATH undergoes a strong interaction with the binder of the double-base propellant and a weak interaction with RDX. The burning rates of the two propellants were determined by using a Crawford bomb. The results showed that the burning rate rises by about 19–66% when 23.5%DATH is substituted for RDX in a minimum smoke propellant. Meanwhile, the N₂ level in the combustion gases is enhanced, which is valuable for a reduction of the signal level of the solid propellant. This revised version was published online in July 2006 with corrections to the Cover Date.     

Electrochemical reduction and voltammetric determination of metronidazole at a nanomaterial thin film coated glassy carbon electrode

Simple and sensitive electrochemical method for the determination of metronidazole, based on a nanostructured film coated glassy carbon electrode (GCE), is described. Multi-walled carbon nanotubes (MWNT) was dispersed into water in the presence of a hydrophobic surfactant to give very stable and homogeneous MWNT suspension, and a MWNT-film coated GCE was achieved via evaporating solvent. Metronidazole yields a well-defined reduction peak whose potential is −0.71 V at the MWNT-film coated GCE in pH 9.0 Britton-Robinson buffer. Compared with bare GCE, the MWNT-film modified GCE significantly enhances the reduction peak current of metronidazole. All the experimental parameters were optimized for the determination of metronidazole. The detection limit is 6×10⁻⁹ mol/l at 2 min accumulation. This method has been successfully used to determine metronidazole in the drugs. Furthermore, results obtained by the proposed method have been compared with spectrophotometric method.     

Solid-phase synthesis of imidazo[4,5-b]pyridin-2-ones and related urea derivatives by cyclative cleavage of a carbamate linkage

A solid-phase synthesis of substituted cyclic urea derivatives as potential heterocyclic library scaffolds is described. 2-Amino-3-nitropyridine is attached to Wang resin via a carbamate linkage. Reduction of the nitro group was achieved with SnCl(2).2H(2)O. Reductive alkylation with a range of substituted benzaldehydes followed by cyclative cleavage afforded a small library of 3-substituted imidazo[4,5-b]pyridine-2-ones in 33-45% yield and 59-88% purity. Subsequently, this methodology was applied to the synthesis of 3-substituted imidazo[4,5-f]quinolin-2-ones.     

淫羊藿根与叶活性成分的分析和比较

采用细胞膜色谱法（ＣＭＣ）筛选，并结合离体药理实验确定主要活性成分，利用高效液相色谱法分析比较了淫羊藿根与叶中的活性成分及其差异性．色谱条件为Ｋｒｏｍａｓｉｌ ＯＤＳ 柱（１５０ ｍｍ× ４．６ ｍｍ．Ｉ．Ｄ ）流动相甲醇－水（７０：３０，Ｖ：Ｖ）；检测波长２７０ｎｍ。筛选发现淫羊藿根中的两个有效成分ＹＹＨ－２１４和ＹＹＨ－２１６对血管有较强的舒张作用，表明活性成分在ＣＭＣ模型体系中的保留特性与药理作用之间存在良好的相关性。在此色谱条件下淫羊藿叶未检测到这两种活性成分．     

Photochemical reaction of Rh2(CO)4(μ-TPP)(TPP=tetraphenyl-porphyrinato) with pyridine (Py) in benzene. Generation of a mononuclear rhodium(II) porphyrin radical complex Rh(TPP)(Py)

Photolytic decarbonylation of Rh₂(CO)₄(TPP) (TPP=tetraphenylporphyrinato) with pyridine (Py) in benzene gives an unusual monomeric Rh^II radical complex Rh(TPP)(Py), which has been characterised by thermal and spectroscopic measurements and by vapour pressure osmosis.     

Evaluating formation and growth mechanisms of silica particles using fluorescence anisotropy decay analysis

At present, there is no direct experimental evidence that primary silica particles, which exist only transiently for a few seconds during the St?ber silica synthesis, can be stable in aqueous solutions. In the present work, we show that primary silica particles are formed spontaneously after the dissolution of diglycerylsilane (DGS) in aqueous solutions and remain stable for prolonged periods of time. By using time-resolved fluorescence anisotropy (TRFA), we demonstrate that this unique property of DGS is ascribed to the slow kinetics of silica particle growth in diluted sols at pH approximately 9.0. The anisotropy decay of the cationic dye rhodamine 6G (R6G), which strongly adsorbs to silica oligomers and nanoparticles in DGS sols, could be fit to three components: a fast (picosecond) scale component associated with free R6G, a slower (nanosecond) rotational component associated with R6G bound to primary silica particles, and a residual (nondecaying) anisotropy component associated with R6G that was bound to secondary or larger particles that were unable to rotate on the time scale of the R6G emission lifetime (4 ns). The data show that, under conditions where fast hydrolysis is obtained, the initial size of the nuclei depends on the silica concentration, with larger nuclei being present in more concentrated sols, while the rate of growth of primary particles depends on both silica concentration and solution pH. At low silica concentrations and high pHs, it was possible to observe the growth of stable, nonaggregating primary silica particles by a mechanism involving rapid nucleation followed by monomer addition. The presence of stable primary particles was confirmed by atomic force microscopy (AFM) imaging. At higher silica concentrations and lower pHs, there was an increase in the initial size of the nuclei formed, which subsequently grew to a larger radius (> 4.5 nm) or aggregated with time, and in such cases, nucleation and aggregation occurred simultaneously in the early stage of silica formation. The data clearly show the power of time-resolved fluorescence anisotropy decay measurements for probing the growth of silica colloids and show that this method is useful for elucidating the mechanism of particle formation and growth in situ.