Portable chemiluminescence multiplex biosensor for quantitative detection of three B19 DNA genotypes

A miniaturized multiplex biosensor exploiting a microfluidic oligonucleotide array and chemiluminescence (CL) lensless imaging detection has been developed for parvovirus B19 genotyping. The portable device consists of a reaction chip, comprising a glass slide arrayed with three B19 genotype-specific probes and coupled with a polydimethylsiloxane microfluidic layer, and a charge-coupled device camera modified for lensless CL imaging. Immobilized probes were used in DNA hybridization reactions with biotin-labeled targets, and then hybrids were measured by means of an avidin-horseradish peroxidase (HRP) conjugate and CL detection. All hybridization assay procedures have been optimized to be performed at room temperature through the microfluidic elements of the reaction chip, with sample and reagents delivery via capillary force exploiting adsorbent pads to drive fluids along the microchannels. The biosensor enabled multiplex detection of all B19 genotypes, with detectability down to 80 pmol?L^?1 for all B19 genotype oligonucleotides and 650 pmol?L^?1 for the amplified product of B19 genotype 1, which is comparable with that obtained in traditional PCR-ELISA formats and with notably shorter assay time (30 min vs. 2 h). The specificity of the assay has been evaluated by performing DNA–DNA hybridization reactions among sequences with different degrees of homology, and no cross hybridizations among B19 genotypes have been observed. The clinical applicability has been demonstrated by assaying amplified products obtained from B19 reference serum samples, with results completely consistent with the reference PCR-ELISA method. The next crucial step will be integration in the biosensor of a miniaturized PCR system for DNA amplification and for heat treatment of amplified products.

Acid-Catalyzed Diels-Alder Reactions of Cycloalkenones

Whereas the Diels-Alder reaction has been in vogue as a facile method of six-membered ring construction for many years, its application to a one-step cis-octalone synthesis was precluded by discouraging, early reports on the conditions required for the interaction of dienes with 2-cyclohexenones and on the yields of the resultant adducts.^1,2 It is quite conceivable that these observations were responsible in part for the minimization of use of an otherwise attractive route toward angularly alkylated six-membered polycycles in the field of steroid total synthesis. The discovery of Lewis acid catalysis of the cycloaddition of α, β-unsaturated carbonyl compounds³ has rekindled interest in the above reactions.⁴ The following discussion illustrates octalone     

Pyrrole-Annulated Heterocyclic Systems. Synthesis of 2H-Pyrrolo[3,4-b][1,5]benzothiazepine 4,4-Dioxide Derivatives

Condensation of 2-nitrothiophenol with ethyl propiolate afforded 3-(2-nitrophenylthio)propenoate. Oxidation of sulfur atom to sulfone group gave ethyl 3-(2-nitrophenylsulfonyl)propenoate, which underwent condensation with tosyl methylisocyanide (TosMIC) to yield ethyl 4-(2-nitrophenylsulfonyl)pyrrole-3-carboxylate. Reduction of nitro group afforded ethyl 4-(2-aminophenylsulfonyl)-1H-pyrrole-3-carboxylate, which was cyclized to 2H-pyrrolo[3,4-b][1,5] benzothiazepin-10(9H)-one 4,4-dioxide. Similar procedure was used for the synthesis of 9,10-dihydro-10-methyl-2H-pyrrolo[3,4-b][1,5]benzothiazepine 4,4-dioxide.     

Microwave-assisted oxidation of silibinin: a simple and preparative method for the synthesis of improved radical scavengers

A new and preparative oxidation of silibinin has been developed to give access to two different silibinin derivatives known for their enhanced antioxidant properties. Conventional heating methods were compared with results obtained from microwave (MW) heating. The base-catalysed oxidation of silibinin under MW heating is a very efficient method for the preparation of 2,3-dehydrosilybin and a related silybin rearrangement product. This latter compound shows enhanced radical scavenging properties. Optimised conditions were used to prepare 2,3-dehydrosilybins A and B from optically pure silybins A and B. An efficient, preparative purification method was also developed to enable isolation of different products in high purity.     

Application of an innovative matrix solid-phase dispersion–solid-phase extraction–liquid chromatography–tandem mass spectrometry analytical methodology to the study of the metabolism of the estrogenic mycotoxin zearalenone in rainbow trout liver and muscular tissue

The metabolic fate of the estrogenic mycotoxin zearalenone in rainbow trout is presently unknown. In this study, the tissue concentration of zearalenone and its principal metabolites (α-zearalenol and β-zearalenol) was determined. A known amount of zearalenone was administered as a single bolus to ten fish, and the biological tissue concentration was determined at various times following administration. The analytes were extracted from liver and muscular tissue using an on-line matrix solid-phase dispersion–solid-phase extraction sample preparation protocol, and their concentration determined by HPLC–Turboionspray–tandem mass spectrometry. The results showed that zearalenone is mainly metabolized into α-zearalenol in both liver and muscular tissues. The maximum concentrations of each analyte found in liver were 76.1, 211.2 and 63.7?ng/g respectively for zearalenone, α-zearalenol and β-zearalenol, while in muscular tissue they were 10.7, 8.2 and 6.5?ng/g. These values were reached after 2?h in liver tissue and 12?h in muscular tissue. Moreover the data obtained showed that the elimination rate in liver is quite fast since 48?h after the exposure less than 7% of the maximum concentration found is still present. In muscular tissue, however, about one-third of the maximum concentration found is still present after 48?h.     

Multiresidue determination of UV filters in water samples by solid‐phase extraction and liquid chromatography with tandem mass spectrometry analysis

UV filters, contained in sunscreens and other cosmetic products, as well as in some plastics and industrial products, are nowadays considered contaminants of emerging concern because their widespread and increasing use has lead to their presence in the environment. Furthermore, some UV filters are suspected to have endocrine disruption activity. In the present work, we developed an analytical method based on liquid chromatography with tandem mass spectrometry for the determination of UV filters in tap and lake waters. Sixteen UV filters were extracted from water samples by solid‐phase extraction employing graphitized carbon black as adsorbent material. Handling 200 mL of water sample, satisfactory recoveries were obtained for almost all the analytes. The limits of detection and quantification of the method were comparable to those reported in other works, and ranged between 0.7–3.5 and 1.9–11.8 ng/L, respectively; however in our case the number of investigated compounds was larger. The major encountered problem in method development was to identify the background contamination sources and reduce their contribution. UV filters were not detected in tap water samples, whereas the analyses conducted on samples collected from three different lakes showed that the swimming areas are most subject to UV filter contamination.     

Exploiting in vitro and in vivo bioluminescence for the implementation of the three Rs principle (replacement,reduction, and refinement) in drug discovery

Bioluminescence-based analytical tools are suitable for high-throughput and high-content screening assays, finding widespread application in several fields related to the drug discovery process. Cell-based bioluminescence assays, because of their peculiar advantages of predictability, possibility of automation, multiplexing, and miniaturization, seem the most appealing tool for the high demands of the early stages of drug screening. Reporter gene technology and the bioluminescence resonance energy transfer principle are widely used, and receptor binding studies of new agonists/antagonists for a variety of human receptors expressed in different cell lines can be performed. Moreover, bioluminescence can be used for in vitro and in vivo real-time monitoring of pathophysiological processes within living cells and small animals. New luciferases and substrates have recently arrived on the market, further expanding the spectrum of applications. A new generation of probes are also emerging that promise to revolutionize the preclinical imaging market. This formidable toolbox is demonstrated to facilitate the implementation of the three Rs principle in the early drug discovery process, in compliance with ethical and responsible research to reduce cost and improve the reliability and predictability of results.     

Water-Assisted Concerted Proton-Electron Transfer at Co(II)-Aquo Sites in Polyoxotungstates With Photogenerated RuIII(bpy)33+ Oxidant

The cobalt substituted polyoxotungstate [Co₆(H₂O)₂(α-B-PW₉O₃₄)₂(PW₆O₂₆)]¹⁷⁻ ( Co6 ) displays fast electron transfer (ET) kinetics to photogenerated Ru^III(bpy)₃³⁺, 4 to 5 orders of magnitude faster than the corresponding ET observed for cobalt oxide nanoparticles. Mechanistic evidence has been acquired indicating that: (i) the one-electron oxidation of Co6 involves Co(II) aquo or Co(II) hydroxo groups (abbreviated as Co6(II) −OH ₂ and Co6(II) −OH, respectively, whose speciation in aqueous solution is associated to a pK_a of 7.6), and generates a Co(III)−OH moiety ( Co6(III) −OH), as proven by transient absorption spectroscopy; (ii) at pH>pK_a, the Co6(II) −OH→Ru^III(bpy)₃³⁺ ET occurs via bimolecular kinetics, with a rate constant k close to the diffusion limit and dependent on the ionic strength of the medium, consistent with reaction between charged species; (iii) at pH <pK_a, the process involves Co6(II) − OH₂ → Co6(III)−OH transformation and proceeds via a multiple-site, concerted proton electron transfer (CPET) where water assists the transfer of the proton, as proven by the absence of effect of buffer base concentrations on the rate of the ET and by a H/D kinetic isotope in a range of 1.2–1.4. The reactivity of water is ascribed to its organization on the surface of the polyanionic scaffold through hydrogen bond networking involving the Co(II)−OH₂ group.