n维体系的性质

讨论了n维空间能谱ε=ap’的麦克斯韦速度分布律和n维情况固体热容量以及n维情况斯特藩一玻尔兹曼定律,并得出结论：麦克斯韦速度分布律、n维情况固体热容量及n维情况斯特藩-玻尔兹曼定律都与维度及态密度有关．     

����ڶԷ�Բ������������ȶ���Ӱ����о�

通过引入Cap-cyclide坐标和使用Wangerin函数,基于B Bernstein的能量原理,针对位于导体壁中的任意环径比和任意拉长比的非圆截面等离子体,不使用任何近似的方法,求得了等离子体的稳定解析解。进而利用计算机对解析结果进行数值计算,并通过β和稳定系数q的关系,分析和讨论了导体壁对非圆截面等离子体稳定性的影响。     

The synthesis of optically pure β-lactams derived from sugars. High-pressure [2+2] cycloaddition of toluene-4-sulphonyl isocyanate to glycals.

[2+2] Cycloaddition of toluene-4-sulphonyl isocyanate to glycals 1 - 4 at room temperature under 10 kbar pressure gave respective β-lactams 5 - 8 in good yields. The reaction proceeds regio- and stereospecifically to afford the four-membered ring in position trans to the acetoxy group at C-3 of the glycal moiety.     

碳税机制下考虑不同低碳策略的动态博弈模型及复杂性研究

考虑碳排放税,建立双寡头制造商分别实施废品回收和绿色低碳广告投入策略的动态博弈模型。通过系统稳定域,分岔图,功率谱等分析了博弈模型纳什均衡解处的稳定性及参数对系统稳定域的影响,同时对系统的复杂性特征进行了研究。结果表明,消费者回收价格敏感性增加会使整个系统稳定域缩小,而绿色低碳广告投入水平增加只会使实施该策略的企业自身稳定域扩大;当制造商价格调整速度过快时,系统会进入混沌状态;混沌状态下,对比实施广告策略的制造商,实施废品回收策略的制造商价格调整行为对市场造成的震荡更大。最后使用反馈控制策略对系统混沌状态进行了有效的控制,研究结果对制造商低碳策略选择及价格决策有着较好的借鉴意义。     

Novel copolymers of styrene. 6. Some oxy ring-disubstituted propyl 2-cyano-3-phenyl-2-propenoates

Novel trisubstituted ethylenes, oxy ring-disubstituted propyl 2-cyano-3-phenyl-2-propenoates, RPhCH = C(CN)CO₂C₃H₇ (where R is 4-methoxy-2-methyl, 4-methoxy-3-methyl, 3-ethoxy-4-methoxy, 3,4-dibenzyloxy, 3-benzyloxy-4-methoxy, 4-benzyloxy-3-methoxy) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and propyl cyanoacetate and characterized by CHN elemental analysis, IR, ¹H- and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR, GPC, DSC, and TGA. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (3–22% wt.), which then decomposed in the 500–800°C range.     

焙烧方法和焙烧条件对纳米Au/HZSM-5催化剂金粒径和催化性能的影响

采用负压沉积沉淀法制备了纳米Au/HZSM-5催化剂前体,研究了深床焙烧和等离子体焙烧两种方法,以及焙烧温度和焙烧气氛对催化剂中纳米金粒径和催化性能的影响,并采用ICP、TEM、XRD、UV-vis、XPS等表征方法对催化剂金粒子进行了物化性能表征,采用合成气羰基化制乙酸甲酯反应表征催化性能。结果表明,不同焙烧方法和不同焙烧温度及气氛对负载型纳米Au/HZSM-5催化剂中金粒径、形貌、物化性质和催化性能有明显影响。其中,以等离子体焙烧方法在500℃氮气气氛下制备的纳米1.86%Au/HZSM-5催化剂中的金粒径最小,为2-5 nm。用于催化合成气羰基化制乙酸甲酯反应,原料中CO的转化率为67%,乙酸甲酯选择性可达78%。     

联苯胺与二苯胺共聚物的界面聚合及其表征

采用界面聚合法合成了聚联苯胺、聚二苯胺以及联苯二胺与二苯胺的共聚物。利用红外光谱(FT-IR)、紫外可见吸收光谱(UV-vis)、电子扫描显微镜(SEM)、X射线衍射(XRD)、循环伏安等手段初步探讨了单体配比对共聚物形貌、结构及性能的影响。结果表明:界面聚合法合成的聚联苯胺呈现微米级棒状分布,随着共聚物中二苯胺结构单元的增加,棒状结构消失,聚合物趋于颗粒状分布;共聚后聚合物的共轭程度下降,但其结晶性与电化学行为得到了一定的改善;当共聚物中联苯胺与二苯胺的单体摩尔比为1/2时,共聚物电化学行为最佳。     

Preparative isolation and purification of rupestonic acid from the Chinese medicinal plant Artemisia rupestris L. by high-speed counter-current chromatography

Rupestonic acid was purified for the first time by high-speed counter-current chromatography from a dichloromethane extract of the traditional Chinese medicinal plant Artemisia rupestris L. The separation was performed in two steps with a two-phase solvent system composed of n-hexane-ethyl acetate-methanol-water (6:4:3.5:6.5, v/v) with 0.5% acetic acid in stationary-phase. From 200 mg of the crude extract, 27.9 mg of rupestonic acid was obtained at over 98% purity as determined by HPLC analysis, and its chemical structure was confirmed by MS, 1H and 13C nuclear magnetic resonance.     

A sequential injection method for the determination of piroxicam in pharmaceutical formulations using europium sensitized fluorescence

A simple, selective and sensitive luminescence method for the assay of piroxicam (PX) in pharmaceutical formulation is developed. The method is based on the luminescence sensitization of europium (Eu³⁺) by complexation with PX. The signal for PX–EU is monitored at λ_ex=358 nm and λ_em=615 nm. Optimum conditions for the formation of the complex in methanol were 0.01 M TRIS buffer and 0.2 mM of Eu³⁺ which allows the determination of 100–2000 ppb of pX in batch method and 100–1000 ppb with limit of detection (LOD) = 23.0 ppb using sequential injection analysis (SIA). The relative standard deviations of the method range between 2 and 3% indicating excellent reproducibility of the method. The proposed method was successfully applied for he assay of PX in pharmaceutical formulations (Feldene capsules and tablets). Average recoveries of 101.0±0.3 and 98.8±2.7% were obtained for capsules in methanol using batch and sequential injection (SI) methods, respectively.