Polymethylmethacrylate derivatives Eudragit E100 and L100: Interactions and complexation with surfactants

Precipitation or coprecipitation of polyelectrolytes has been largely investigated. However, the precipitation of polyelectrolytes via addition of charged and non‐charged surfactants has not been systematically studied and reported. Consequently, the aim of this work is to investigate the effect of different surfactants (anionic, cationic, non‐charged and zwitterionic) on the precipitation of cationic and anionic polymethylmethacrylate polymers (Eudragit). The surfactants effect has been investigated as a function of their concentration. Special attention has been dedicated to the CMC range and to the colloidal characterization of the formed dispersions. Moreover, the effect of salt (NaCl) and pH was also addressed. It is pointed out that non‐ionic and zwitterionic surfactants do not interact with charged Eudragit E100 and L100. For oppositely charged Eudragit E100/SDS and Eudragit L100/CTAB, precipitation occurs, and the obtained dispersions have been characterized in terms of particle size distribution and zeta potential. It was established that the binding of SDS molecules to Eudragit E100 polymer chains is made through the negative charges of the surfactant heads under the CMC value whereas binding of CTAB to Eudragit L100 chains is made at a CTAB concentration 5 times above its CMC. For Eudragit E100/SDS system, a more acidic medium induces aggregation. A same result was observed for the Eudragit L100/CTAB at a more basic pH. Moreover, it was observed that increasing salt concentration (higher than 100 mM) led to aggregation as generally observed for polycations/anionic surfactant systems.     

Ultrasensitive,Rapid, and Selective Detection of Mercury Using Graphene Assisted Laser Desorption/Ionization Mass Spectrometry

We report an extremely sensitive and specific detection of mercuric ions (Hg²⁺) based on graphene assisted laser desorption/ionization mass spectrometry (GALDI-MS). Combining the highly selective coordination interactions between thymine (T) and Hg²⁺, we present a simple, effective, and novel approach, based on π–π interactions of the T-Hg²⁺-T complex and G that can serve as a platform and matrix for GALDI-MS. The present sensor not only exhibits high selectivity and sensitivity (picomolar) to Hg²⁺ in aqueous solution, but also can elucidate the chemical structures of the metal complexes. The significant advantage in the current approach is that there is no need for a sophisticated instrument, and no sample pretreatment is required to detect the Hg²⁺ ions.

A Compact Solar Laser Side-Pumping Scheme Using Four Off-Axis Parabolic Mirrors

Journal of Russian Laser Research - Laser side-pumping approach is an extremely attractive configuration for many laser applications. Through this approach, the laser beam can be generated in the...     

Utility of 2-(5-methyl-1-phenyl-1H-pyrazol-4-yl)-2-oxo-N′-phenylaceto-hydrazonoyl bromide as precursor for synthesis of new functionalized heterocycles

2-(5-Methyl-1-phenyl-1H-pyrazol-4-yl)-2-oxo-N′-phenylaceto-hydrazonoyl bromide was synthesized and used as precursor for synthesis of some new 1,3,4-thiadiazoles, pyrrolo[3,4-c]pyrazoles, and 1,2,4-triazolo[4,3-a]pyrimidines. The mechanisms that account for formation of products were discussed. Also, the structures of all the newly synthesized products were confirmed based on elemental analysis, spectral data and by alternative methods.     

Effect of sulphate groups on catalytic properties of chromium supported by zirconia in the <Emphasis Type="Italic">n</Emphasis>-hexane aromatization

Catalysts based on chromium supported by sulphated and unsulphated zirconia have been synthesised, in one step, by sol–gel method and dried in hypercritical solvent conditions. Comparative study of their catalytic properties shows that dispersed Cr³⁺ seems to be the active species in the n-hexane aromatisation reaction. However, the acidity generated by sulphate groups acts as coke eliminator of the layers deposed on the surface mainly when catalyst is calcined at high temperature.     

Coagulation of antibody-sensitized latexes in the presence of antigen

The paper describes a study of the kinetics and mechanism of the coagulation of two types of immunoassays using sensitized latexes. The positive response to the first test is based on the aggregation of the gamma globulin (IgG)-coated polystyrene latexes in the presence of IgM rheumatoid antigen. The second test is relative to the heteroaggregation of two types of sensitized latexes induced by the presence of human chorionic gonadotropin (HCG). In the latter test, two identical polystyrene latexes bearing carboxylic acid surface groups were sensitized by covalent coupling of monoclonal antibodies specific for the αHCG determinant on one type of latex and for the βHCG determinant on the other type. Using the Coulter Counter method, the aggregate size distribution c(n) was determined as a function of the number n of elementary constituents, thus enabling calculation of the number N(t) and weight S(t) average sizes of the aggregates. The temporal variations of the average sizes were compared with typical situtions of reaction-limited aggregation processes in order to characterize the mechanism of aggregation induced by antibody–antigen reactions.     

Tailoring of carboxyl‐decorated magnetic latex particles using seeded emulsion polymerization

In this research, submicron and carboxyl‐functionalized magnetic latex particles were elaborated by using seeded emulsion polymerization technique in presence of oil‐in‐water (o/w) magnetic emulsion as seed. The polymerization conditions were optimized in order to get well‐defined latex particles with magnetic core and polymer shell bearing carboxylic (–COOH) functionality. Starting from (o/w) magnetic emulsion as seed, synthesis process was performed by copolymerization of styrene (St) monomer with the cross‐linker divinylbenzene (DVB) in presence of 4,4′‐azobis(4‐cyanopentanoic acid) (ACPA) as a carboxyl‐bearing initiator. The prepared magnetic latex particles were first characterized in terms of particle size, chemical composition, morphology, magnetic properties, magnetic content, and colloidal stability using various techniques, e.g. particle size analyzer using dynamic light scattering (DLS) technique, Fourier transform infrared, transmission electron microscopy, vibrating sample magnetometer, thermogravimetric analysis, and zeta potential measurements as a function of pH of the dispersion media, respectively. The prepared magnetic latex particles were then used as second seed for further functionalization with methacrylic acid (MAA) in order to enhance carboxylic groups on the magnetic particle's surface. The results showed that final magnetic latex particles possessed spherical morphology with core‐shell structure and enriched carboxylic acid functionality. More importantly, they exhibited superparamagnetism with high magnetic content (58.42 wt%) and high colloidal stability, which considered as the main requirements for their application in the biomedical diagnostic domains. Copyright © 2017 John Wiley & Sons, Ltd.     

Polyethylenimine-impregnated mesoporous silica: effect of amine loading and surface alkyl chains on CO2 adsorption

Poly(ethyleneimine) (PEI) supported on pore-expanded MCM-41 whose surface is covered with a layer of long-alkyl chains was found to be a more efficient CO(2) adsorbent than PEI supported on the corresponding calcined silica and all PEI-impregnated materials reported in the literature. The layer of surface alkyl chains plays an important role in enhancing the dispersion of PEI, thus decreasing the diffusion resistance. It was also found that at low temperature, adsorbents with relatively low PEI contents are more efficient than their highly loaded counterparts because of the increased adsorption rate. Extensive CO(2) adsorption-desorption cycling showed that the use of humidified feed and purge gases affords materials with enhanced stability, despite limited loss due to amine evaporation.     

Adsorption of CO<Subscript>2</Subscript>-containing gas mixtures over amine-bearing pore-expanded MCM-41 silica: application for CO<Subscript>2</Subscript> separation

Adsorption of CO₂, N₂, CH₄ and H₂ on triamine-grafted pore-expanded MCM-41 mesoporous silica (TRI-PE-MCM-41) was investigated at room temperature in a wide range of pressure (up to 25 bar) using gravimetric measurements. The material was found to exhibit high affinity toward CO₂ in comparison to the other species over the whole range of pressure. Column-breakthrough dynamic measurements of CO₂-containing mixtures showed very high selectivity toward CO₂ over N₂, CH₄ and H₂ at CO₂ concentrations within the range of 5 to 50%. These conditions are suitable for effective removal of CO₂ at room temperature from syngas, flue gas and biogas using temperature swing (TS) or temperature-pressure swing (TPS) regeneration mode. Moreover, TRI-PE-MCM-41 was found to be highly stable over hundreds of adsorption-desorption cycles using TPS as regeneration mode.