商用氧化铟锡玻璃:室温高效还原氮气的催化剂电极

NH₃作为一种必需的活化氮源,在化肥、染料、爆炸物和药物等的制造中起到了关键作用;同时,它也是一种在交通运输领域具有吸引力的无碳能源载体.工业上生产氨气使用典型的哈伯-博世工艺,但是此工艺涉及大量的能源消耗和碳排放,给环境带来巨大的压力.电化学氮还原反应(NRR)能够在温和环境下实现环境友好、节能的氨合成,但此过程需要高效的电催化剂.高效的NRR催化剂(Au、Ag、Pd和Ru)储量少、成本高,阻碍了它的实际应用.因此,设计和开发由地球上丰富的元素制成的具有成本效益的催化剂来代替NRR催化剂意义重大.本课题组最近的研究(Chem.Commun.,2018,54,12966-12969)表明,SnO2在环境条件下具有电催化氧化活性,但其低电导率限制了其性能,可通过氟掺杂或石墨烯杂化予以解决.氧化铟锡(ITO)作为一种含SnO2的材料,导电性好,可望用于NRR的高效电催化剂中.因此,本文采用商用氧化铟锡玻璃(ITO/G)作为催化剂电极,在温和环境条件下进行N₂-NH₃的电化学转化,并呈现出对生成氨气有较高的选择性.XRD和XPS结果表示,商用ITO/G中存在In,Sn和O元素;SEM显示ITO/G具有清晰的纳米薄膜结构和267 nm的截面厚度;相应的EDX谱图显示In,Sn和O元素分布均匀,且原子比为32.11:3.16:64.74.采用紫外-可见光谱及线性扫描伏安和恒电位极化等电化学测试研究了商用ITO/G的NRR活性.在0.5 M LiClO4电解液中测试时,于-0.40 V vs.RHE条件下,ITO/G的NH₃产率为1.06×10^-10 mol s^-1 cm^-2,其法拉第效率为6.17%.15N同位素标记实验证实了所测到的NH₃是由ITO/G催化的N₂电还原反应生成的.利用第一性原理计算探讨了在ITO催化剂上可能的NRR反应机理,确定了ITO催化剂的NRR活性位点、N₂化学吸附活性位点以及NRR的反应途径.此外,24 h恒电位(-0.40 V vs.RHE)极化测试和2 h恒电位极化(-0.40 V vs.RHE)测试后的XRD和SEM结果表明,该催化剂具有较高的电化学稳定性.综上所述,商用ITO/G用作在环境条件下将N₂转化为NH₃的有效催化剂电极,将为开发人工固定氮气的ITO基纳米结构提供一种研究途径.     

Backbending Phenomena in Even–Even $${}^{\boldsymbol{162{-}172}}$$ Hf Isotopes

Physics of Atomic Nuclei - This study probes the backbending phenomena in even–even $${}^{162{-}172}$$ Hf isotopes. Experimental ground-state rotational energies up to $$J^{\pi}=36^{+}$$...     

Surface and bulk structural properties of nanostructured porous silicon prepared by electrochemical etching at different etching time

Nanostructured porous silicon (NPSi) is versatile nanomaterials, and attractive area in device application after visible luminescence was observed from NPSi by Canham (1990). NPSi has been prepared by electrochemical techniques with silicon wafer as a based material. The electrolyte solution consists of ethanol and hydrofluoric acid at volume ratio of 1:1. The etching time was varied while other preparation parameters were fixed to produce different porosity of NPSi samples. The structural properties of samples were measured using field emission scanning electron microscope and Raman spectrometer. The surface structural study has shown the surface roughness increase at inertial stage but decrease gradually with longer etching time. However, nanostructured surface was decreased with increasing of etching time. From side view measurement, the nanopillar of NPSi becomes smaller size while increase of etching time. The crystallinity of PSi is observed by Raman scattering varied with different etching time. The photoluminescence measurement will be carried out to study the correlation between optical and structural properties.     

Schiff bases of indoline-2,3-dione (isatin) with potential antiproliferative activity

ABSTRACT: BACKGROUND: Cancer is one of the most dreaded diseases and it is a leading cause of mankind death worldwide. Recent reports documented a remarkable antiproliferative activity of isatin nucleus against various cancer cell lines. The current work describes the antiproliferative activity of Schiff bases of combinatorial mixtures of the isatin derivatives M1-M22 as well as the individual compounds 1-11(A-K) of these combinatorial mixtures. RESULTS: The designed combinatorial library composed from eleven hydrazides A-K and eleven isatin derivatives 1-11 has been synthesized to formally generate 22 mixtures, M1-M22 of 121 Schiff bases, and their antiproliferative activity against K562 chronic myelogenous leukemia cells was evaluated. The indexed method of analysis of the prepared library was applied to elucidate the active components in the tested mixtures M1-M22. The predictions from the crossing procedure was validated through evaluation of the antiproliferative activity of individual compounds 1-11(A-K) of the library. Individual compounds 1-11(A-K) were also evaluated against the non-tumorigenic MCF-12A cell line to investigate their selectivity. A pharmacophore model was developed to further optimize the antiproliferative activity among this series of compounds. CONCLUSIONS: Variable antiproliferative activity was revealed with the investigated mixtures M1-M22 and the individual compounds 1-11(A-K). Most of the tested mixtures and several individual Schiff bases displayed high potency with IC50 values in the low micromolar range. A considerable selectivity of some individual compounds to the tumorigenic K562 cell line compared with the non-tumorigenic MCF-12A cell line was observed as indicated by their selectivity index (SI).     

Part III: Study of Tissue Distribution and Retention

The tissue distribution of colloidal zirconyl phosphate-P₃₂ and its retention following i.m and i.v. injection in mice were studied. About 63 per cent of the i.m. injected P₃₂ activity was retained at the site of injection after 5 days, suggesting the use of the colloid in the local treatment of tumours. The deposition of the colloid in bone and liver after i.v. injection presented zirconyl phosphateP₃₂ as useful in the radiotherapy of bone and liver disease.     

Magnetohydrodynamic effects on blood flow through an irregular stenosis

This paper investigates the magnetohydrodynamic (MHD) effects on the blood flow. Rheological properties of blood have been taken into account through the constitutive equations of a micropolar fluid. Unsteady nonlinear differential system is solved numerically by employing finite difference method. Explicit results of axial velocity, flow rate and wall shear stress are obtained and analyzed. It is found that an applied magnetic field reduces the blood flow rate. Copyright © 2010 John Wiley & Sons, Ltd.     

Stress intensity factors for surface cracks in round bar under single and combined loadings

This paper numerically discusses stress intensity factor (SIF) calculations for surface cracks in round bars subjected to single and combined loadings. Different crack aspect ratios, a/b, ranging from 0.0 to 1.2 and the relative crack depth, a/D, in the range of 0.1 to 0.6 are considered. Since the torsion loading is non-symmetrical, the whole finite element model has been constructed, and the loadings have been remotely applied to the model. The equivalent SIF, F^*_EQF^{*}_{EQ} is then used to combine the individual SIF from the bending or tension with torsion loadings. Then, it is compared with the combined SIF, F^*_FEF^{*}_{FE} obtained numerically using the finite element analysis under similar loadings. It is found that the equivalent SIF method successfully predicts the combined SIF, F^*_EQF^{*}_{EQ} for Mode I when compared with F^*_FEF^{*}_{FE}. However, some discrepancies between the results, determined from the two different approaches, occur when F _III is involved. Meanwhile, it is also noted that the F^*_FEF^{*}_{FE} is higher than the F^*_EQF^{*}_{EQ} due to the difference in crack face interactions and deformations.     

The effect of soapstock on the cement raw mix grindability

The aim of this work is to investigate the possibility of using industrial wastes as new grinding aids in cement industry. Two samples of Soapstock from different oils were used (Sunflower Oil (SO), Corn Oil (CO)). For this purpose, one reference sample was produced without using any admixture and another one using reference grinding aids (Triethanolamine TEA).The raw mixes were characterized via differential scanning calorimetry (DSC), FT-IR technique, chemical analysis by X-ray florecence (XRF), X-ray powder diffraction (XRD), and mineral composition by Bouge equation and determination of free calcium oxide (CaO_f) for clinker. Grindability was determined according to PSD and resides on sieve 90 μm.In all cases the addition of grinding aids resulted in the improvement of grindability (fact that was attributed to the additive ability not only to reduce resistance to combination, but also to prevent agglomeration and powder coatings of ball and mill), and the clinker produced by this admixture was not effective.