中国陆相油气的形成和运移(Ⅱ)

本文(Ⅰ)着重研究了中国陆相湖盆沉积物中有机质向油气演化的过程.本文(Ⅱ)阐明了现代青海湖沉积物埋藏初期及早期成岩作用过程中有机质的演化特征.其结果表明陆相有机质大量开始向石油转化的深度随不同地区、不同时代、不同类型的有机质而异.最后,运用特征有机化合物、稀有气体同位素等资料,结合构造发展史阐述我国陆相油气运移的类型、规模和途径.指出近油源短距离是陆相油气运移的基本特征.     

我国正负术历史

九章算术大約在公元一世紀編集成书,其中已著录正负术,这是我国古代数学上的光輝成就。正負术的产生有它在数学本身內在的发展,但为什么我国很早就熟悉了正負术,这和我国古代天文学的发展有关。东汉元和二年(85),我国天文学家创制的四分曆中,明白的記載了正負术的方法。它說: “強正弱负也。其強弱相減,同名相去;异名从之,从強进少为弱,从弱退少为強。”四分曆在計算太阳的視位置度数时,以不滿整度数部分用少、半、太来区别。少是1/4,半是2/4,太是3/4。比“少”多一些的叫少强,比“少”少一些的叫少弱。它們间的关系是:     

卷云短波红外辐射特性

 采用离散纵标法耦合大气分子吸收，模拟计算了卷云大气的反射特性。研究了在短波波段卷云辐射性质随波长、卷云光学厚度、卷云有效尺度、云高和卷云中冰晶粒子形状等的变化关系，分析了卷云对大气红外背景辐射的影响。结果表明：在2.7 μm的水汽强吸收带上，卷云的出现明显增强了该波段的大气背景辐射，反射率随光学厚度和云高增大而增大。     

HIV蛋白酶抑制剂的定量构效关系研究及其指导下的修饰

HIV蛋白酶是一类用于治疗艾滋病具有潜在价值的关键酶,很多此类酶的抑制剂已经上市.一系列由AHPBA分子的基本骨架进行改造并合成的25个α-羟基β-氨基酸类似物对于HIV蛋白酶具有很高的活性和选择性.我们筛选合适的描述子建立一个二维定量构效关系的模型,模型的均方根误差RMSE=0.09823、相关性系数R=0.97461、F值=30.763、交叉验证的相关系数RCV=0.7071、交叉验证的预测误差平方PRESS=0.588,该模型为HIV蛋白酶抑制剂修饰和设计提供了比较可靠的预测.并且根据“变形钥匙”理论,分别用“杂化肽键”Ψ[CH2NH]、Ψ[CF2NH]、Ψ[COCF2]、替换掉这组类似物中易水解的肽键-CO=NH-,使得这个共轭π键就变成一个较强的单键,变得不易被HIV蛋白酶所水解,从而得到抗AIDS的有效的抑制剂.然后通过原子电荷分布对比、分子对接等方法检验修饰的可能性和合理性.预先设想都在计算结果中得到验证,并且用QSAR模型预测了修饰后分子的活性.     

在高职院校大学物理教学中实施STS教育的探索与实践

论述了在高职院校大学物理教学中实施科学、技术、社会（STS）教育的意义，介绍了在大学物理教学中实施STS教育的做法和体会．     

基于DSP的光纤光栅应变传感器信号检测实验研究

针对光纤光栅应变传感器接收信号弱且信噪比低这一问题,提出了应用DSP技术来抑制噪声,提高Bragg峰值波长检测精度的方法.实验结果表明所设计的498阶Kaiser窗低通FIR数字滤波器能够显著提高光纤光栅应变传感器的信号检测精度.采用DSP技术可以较好地解决光纤光栅传感器的波长解调这一技术难题.     

基于OTDR和SMA原理的分布温度阈值执行器的设计

温度阈值执行器的设计是准分布光纤温度报警系统对温度报警空间定位的关键.本文分析了基于OTDR和SMA设计温度阈值执行器的原理,提出了执行器的物理模型.通过实验测试,从SMA弹簧样品中选出了满足执行器技术要求的记忆弹簧,完成了执行器的机械设计.系统运行表明:执行器能有效运作,能够实现准分布温度报警,并且系统具有接近1.5 m的空间分辨率和低于16 s的响应时间等优良的性能参数.     

Chemical Oxidation of La2CuO4 Epitaxial Thin Films Grown by Pulsed Laser Deposition

Chemical oxidation is used to induce superconductivity in La2CuO4 expitaxial thin films fabricated by pulsed laser deposition technique. Details about the influence of oxidation time on structural, surface morphology, Raman spectra, and electrical properties have been investigated. The results convince that successful uptake of oxygen occurs in the oxidized films, and the content of the inserted oxygen increases with increasing oxidation interval. The possible mechanism for the excess oxygen insertion into the film is also discussed.     

A Base-Emitter Self-Aligned Multi-Finger Sil-xGex/Si Power Heterojunction Bipolar Transistor

With a crystal orientation dependent on the etch rate of Si in KOH-based solution, a base-emitter self-Migned large-area multi-finger configuration power SiGe heterojunction bipolar transistor （HBT） device （with an emitter area of about 880μm^2） is fabricated with 2μm double-mesa technology. The maximum dc current gain is 226.1. The collector-emitter junction breakdown voltage BVcEo is 10 V and the collector-base junction breakdown voltage BVcBo is 16 V with collector doping concentration of 1 × 10^17 cm^-3 and thickness of 400nm. The device exhibited a maximum oscillation frequency fmax of 35.5 GHz and a cut-off frequency fT of 24.9 GHz at a dc bias point of Ic = 70 mA and the voltage between collector and emitter is VCE = 3 V. Load pull measurements in class-A operation of the SiGe HBT are performed at 1.9 GHz with input power ranging from OdBm to 21 dBm. A maximum output power of 29.9dBm （about 977mW） is obtained at an input power of 18.SdBm with a gain of 11.47dB. Compared to a non-self-aligned SiGe HBT with the same heterostructure and process, fmax and fT are improved by about 83.9% and 38.3%, respectively.     

Measuring Grüneisen Parameter of Lead by High Pressure-Jump Method

Using the technology of pressure jump, variations of temperature associated with pressure from 2.4 GPa to 4.6 GPa are measured for lead. The Grfuneisen parameter is calculated from the thermodynamic relation γ =（Ks/T）（aT/aP）s, in which substitution of △T/△P for aT/aP at median pressure is strictly justified. The correction of temperature change is carried out by analysing the experimental data, which makes the process more approaching to an adiabatic condition. The calculated values of △T/ △ P and γ gradually decrease with the increasing pressure. The decrease trend is consistent with the previous work. The γ values in the range of 2-3 GPa are averagely higher than the results of Ramakrishnan et al., indicating the effect of temperature correction. The improved method is promising for measurements of Grfineisen parameter to higher pressure range.