TiO2/CNTs复合材料涂覆隔膜的制备及在锂硫电池中的应用

以金属有机框架材料MIL-125(Ti)为模板制备了多孔TiO₂, 同时引入碳纳米管, 得到碳纳米管交联包覆多孔TiO₂的三维导电复合材料. 将该复合材料涂覆在隔膜表面并应用于锂硫电池. 利用透射电子显微镜(TEM)、 扫描电子显微镜(SEM)和X射线光电子能谱仪(XPS)等对材料的结构和组成进行了表征. 电化学测试结果表明,在0.5C(1C=1675 mA/g)倍率下, CNTs/S复合正极材料表现出高达1051.1 mA·h/g的放电容量, 循环150周后仍可保持在904.8 mA·h/g. 在1C倍率下, 放电容量最高可达1036.9 mA·h/g, 循环250周后仍有763.0 mA·h/g, 展现出了良好的倍率性能和循环稳定性.     

一种基于罗丹明类似物的Cys近红外荧光探针

基于罗丹明类似物作为荧光团合成了一例新型半胱氨酸(Cys)近红外荧光探针CS-Cys.该探针能特异性识别Cys,其他含巯基氨基酸不与探针响应,响应机理为:Cys与CS-Cys分子中的丙烯酸酯发生共轭加成-环化反应,进而羟基裸露并释放出荧光.通过对CS-Cys与Cys在不同pH环境中反应后的荧光变化进行研究,发现通过改变溶液pH值可调节给电子基的供电子能力和荧光团ICT过程,从而使荧光激发波长和发射波长达到近红外区域.     

电絮凝-O3联合工艺处理页岩气压裂采出水

通过研究比较不同处理工艺对页岩气压裂采出水的效果,设计出电絮凝-O_3联合处理采出水的工艺。以化学需氧量(COD)、总悬浮物(TSS)为指标,讨论电絮凝-O_3联合工艺处理页岩气压裂采出水过程中pH、电流密度、电极间距、电解时间以及O_3通气量的影响。结果表明,当pH=8. 0、电流密度为1250A/m~2、极板间距为2cm、电解时间6min、O_3通气量为40L/h时,COD去除率为98. 3%,TSS的去除率为95. 9%,经过电絮凝-O_3联合处理后的采出水的色度、浊度、oil及NH_4-N等污染指标都达到了国家排放标准。     

磷灰石结构荧光粉Ba10(PO4)6F2:Ce3+,Tb3+的合成、发光和能量传递

采用高温固相法合成了系列Ce~(3+)和Ce~(3+)/Tb~(3+)激活的具有磷灰石结构荧光粉Ba_(10)(PO_4)_6F_2。用X射线衍射(XRD)、扫描电镜(SEM)、激发和发射(PLE和PL)光谱对样品进行了表征分析。研究结果表明:所合成的荧光粉Ba_(10)(PO_4)_6F_2∶Ce~(3+),Tb~(3+)具有氟磷灰石结构,样品微观呈现不规则形貌。荧光粉Ba10-x(PO4)6F2∶x Ce~(3+)的相对发射强度随着x增加而增强,当x=0.09时,荧光强度达到最大。荧光粉Ba_(10)(PO_4)_6F_2∶Ce~(3+),Tb~(3+)的激发光谱为240～330 nm的宽带,发射光谱呈现出Ce~(3+)的5d→4f跃迁紫外光(335和358 nm)发射和Tb~(3+)的4f→4f跃迁绿光(542 nm)发射。光谱特性表明,发光过程中存在Ce~(3+)→Tb~(3+)能量传递,能量传递效率可以达到60%。计算Ce~(3+)和Tb~(3+)的临界距离为0.79 nm,能量传递机理是偶极-偶极交互作用。此外,详细论述了Ce~(3+)和Tb~(3+)之间的能量传递和发光的过程。通过调节Tb~(3+)的掺杂浓度,对荧光粉发光色坐标与Tb~(3+)的掺杂浓度之间的关系也进行了研究,随着Tb~(3+)的掺杂量从0增加0.52,荧光粉Ba_(10)(PO_4)_6F_2∶Ce~(3+),Tb~(3+)的发射光谱色坐标可以从(0.149 4,0.045 1)蓝色区变化到(0.280 1,0.585 3)绿色区。     

CuCl_2/离子液体催化炔丙醇、仲胺与CO_2的三组分反应

以二氧化碳代替传统剧毒的光气等来合成氨基甲酸酯已成为研究的热点,然而现存的体系普遍需要高温高压等苛刻反应条件才能催化反应,并且很少有催化体系能够有效地回收和再利用.探索了将CuCl_2/离子液体(IL)用于炔丙醇、仲胺和CO_2的三组分反应合成β-羰基氨基甲酸酯.在常压、45℃的温和条件下,以较低催化当量(2%摩尔分数)的廉价易得的2价铜将多种类型的炔丙醇和仲胺通过简单的"一锅法"合成相应的目标化合物,并且循环利用3次后产率并未见明显下降.分步反应结合NMR监测的机理实验证明,炔丙醇与CO_2先生成的α-亚甲基环碳酸酯是反应的重要中间体,且醋酸型离子液体对炔丙醇和CO_2的活化具有重要作用.     

Reactive Ion Etching as Cleaning Method Post Chemical Mechanical Polishing for Phase Change Memory Device

In order to improve nano-scale phase change memory performance, a super-clean interface should be obtained after chemical mechanical polishing （CMP） of Ge2Sb2Te5 phase change films. We use reactive ion etching （RIE） as the cleaning method. The cleaning effect is analysed by scanning electron microscopy and an energy dispersive spectrometer. The results show that particle residue on the surface has been removed. Meanwhile, Ge2Sb2Te5 material stoichiometric content ratios are unchanged. After the top electrode is deposited, currentvoltage characteristics test demonstrates that the set threshold voltage is reduced from 13 V to 2.7V and the threshold current from 0.1 mA to 0.025 mA. Furthermore, we analyse the RIE cleaning principle and compare it with the ultrasonic method.     

Optimized Second Harmonic Generation of Femtosecond Pulse by Phase-Blanking Effect in Aperiodically Optical Superlattice

In order to minimize the effect of the unconsidered frequency components on the generated compression pulse, the phasing-blanking effect is taken into account of designing the one~dimensionai aperiodic domain reversal structure. Hierarchic genetic algorithm for the design of a domain reversal grating to modulate the spectrum and phase of the generated SH pulse simultaneously are presented. Our simulation shows that the quality of an output pulse is fairly improved.     

First-Principles Calculations for Thermodynamic Properties of Perovskite-Type Superconductor MgCNi3

The ground state properties and equation of state of the non-oxide perovstdte-type superconductor MgCNi3 are investigated by first-principles calculations based on the plane-wave basis set with the local density approximation （LDA） as well as the generalized gradient approximation （GGA） for exchange and correlation, which agree well with both theoretical calculations and experiments. Some thermodynamic properties including the heat capacity, the thermal expansion coefficient and the Griineisen parameter for perovskite structure MgCNi3 are obtained. The dependences of these thermodynamic properties on pressure and temperature are given for the first time.     

A Kind of Exact Inflationary Solution in the Chaotic Inflation Model to Non-minimally Coupled Scalar Field

We present a kind of exact inflationary solution in the chaotic inflation scenario to non-minimal coupled scalar field, taking the Hubble parameter directly as a function of the scalar field φ, H（φ） = αφ^n. Using the analysis of the WMAP3 data, we give the range of power index n.     

Self-Injection and Acceleration of Monoenergetic Electron Beams from Laser Wakefield Accelerators in a Highly Relativistic Regime

Self-injection and acceleration of monoenergetic electron beams from laser wakefield accelerators are first investigated in the highly relativistic regime, using 100 TW class, 27 fs laser pulses. Quasi-monoenergetic multi- bunched beams with energies as high as multi-hundredMeV are observed with simultaneous measurements of side-scattering emissions that indicate the formation of self-channelfing and self-injection of electrons into a plasma wake, referred to as a ＇bubble＇. The three-dimensional particle-in-cell simulations confirmed multiple self-injection of electron bunches into the bubble and their beam acceleration with gradient of 1.5 GeV/cm.