聚氧化乙烯介质中的掺杂硫化锌纳米晶的制备及光学性质

简述了聚氧化乙烯介质中的铽、铕、铥、钆、钇、镓、锰掺杂的硫化锌纳米晶的制备方法以及紫外吸收光谱、激发光谱和光激发发射光谱.制成的硫化锌纳米晶直径为3.0～3.5nm.     

Evolution of Er^3＋ Distribution in the Oxyfluoride Glass Ceramics with Heating

The distribution characteristics of Er3+ ions doped in the oxyfluoride glass ceramics containing LaF3 nanocrystals heat-treated at 650 ℃ for different durations were investigated. The results of the integral absorption cross-section analysis demonstrated that the partition fraction of Er3+ in LaF3 nanocrystals increases with prolonging of heating time. The anomalous phenomena of Er3+ emissions in the up-and the down-conversion fluorescence spectra are well explained based on the calculated results.     

Synthesis of silk-like FeS2/NiS2 hybrid nanocrystals with improved reversible oxygen catalytic performance in a Zn-air battery

The development of highly active and stable reversible oxygen electrocatalysts is crucial for improving the efficiency of metal-air battery devices. Herein, an efficient liquid exfoliation strategy was designed for producing silk-like FeS₂/NiS₂ hybrid nanocrystals with enhanced reversible oxygen catalytic performance that displayed excellent properties for Zn-air batteries. Because of the unique silk-like morphology and interface nanocrystal structure, they can catalyze the oxygen evolution reaction (OER) efficiently with a low overpotential of 233 mV at j = 10 mA cm^?2. This is an improvement from the recently reported catalysts in 1.0 M KOH. Meanwhile, the oxygen reduction reaction (ORR) activity of the silk-like FeS₂/NiS₂ hybrid nanocrystals showed an onset potential of 911 mV and a half-wave potential of 640 mV. In addition, the reversible oxygen electrode activity of the silk-like FeS₂/NiS₂ hybrid nanocrystals was calculated to be 0.823 V, based on the potential of the OER and ORR. Further, the homemade rechargeable Zn-air batteries using FeS₂/NiS₂ hybrid nanocrystals as the air-cathode displayed a high open-circuit voltage of 1.25 V for more than 17 h and an excellent rechargeable performance for 25 h. The solid Zn-air batteries exhibited an excellent rechargeable performance for 15 h. This study provided a new method for designing interface nanocrystals with a unique morphology for efficient multifunctional electrocatalysts in electrochemical reactions and renewable energy devices.     

Luminescent Sensing with Quantum Dots

Summary This review highlights recent advances in the use of quantum dots (QD’s) as luminescent sensors. The bulk of the study concentrates on systems that possess organic ligands bound to the surface of QD’s. These ligands vary from low molecular weight thiols to larger molecules such as maltose binding protein. All have one thing in common: when a target analyte binds to the ligand/receptor, a perturbation of the system occurs, that registers itself as a change in the luminescence intensity of the QD. Two main mechanisms are prevalent in controlling the luminescent intensity in such systems. The first is Photoinduced Electron Transfer (PET) and the second energy transfer. This review looks at current sensors that operate by using these mechanisms. Two component systems are also investigated where a quencher is first added to a solution of the QD, followed by addition of the target analyte that interacts with the quencher to influence the luminescence intensity.     

前驱体水解对纳米铂形状控制合成的影响

以聚丙烯酸钠(NaPA: M_w ≈ 2100)为保护剂，对比研究了H_2还原K_2PtCl_4 和K_2PtCl_6水溶液制备纳米铂晶粒的形状选择性，揭示了前驱体的水解对纳米铂 晶粒的形状控制合成具有显著影响。文献中通常采用的合成立方形状纳米铂的 K_2PtCl_4前驱体在水溶液中不稳定，避光静置一周会析出黑色沉淀。这种不稳定 性导致了以K_2PtCl_4为Pt前驱体的合成结果难以重复。相比而言，避光静墨的 K_2PtCl_6水溶液很稳定，以它为前驱体合成的纳米铂通常为削角八面体。 K_2PtCl_6水溶液暴露于室内光线中会出现[PtCl_6]~(-2)的光致水解。当[PtCl_6] ~(2-)的紫外特征吸收峰(260nm)由于光致水解完全消失后，以聚丙烯酸钠为保护剂 ，通过H_2还原可以有选择性地(约80%)合成由{100}晶面包裹的立方体形状的纳米 铂。     

溶剂萃取法制备Co(PO_3)_2超细微粉

本文用溶剂萃取法成功地制备了偏磷酸钴超细微粉并通过ＸＲＤ，ＩＲ，ＴＧ，ＤＴＡ，ＴＥＭ等实验对超细微粉的组成、结构进行了表征。     

表面修饰二氧化锡纳米微晶的制备与表征

制备了硅烷偶联剂KH-570表面修饰的SnO2纳米微晶，通过FT-IR、XPS、TEM和TG-DTA对其结构和表面特性进行表征和研究. FT-IR和XPS分析结果确证了KH-570与SnO2表面是以化学键合或物理吸附方式相结合,粒子表面存在酯基等有机官能团的红外吸收特征；观测到KH-570中Si原子的Si2s和Si2p谱线. TEM分析表明，表面修饰反应增强了SnO2纳米微晶的疏水性和分散性.由XPS和TG的实测数据探讨了纳米粒子具有较低包覆量的可能原因.     

ZrO2纳米粉末复合羊毛纤维研究

ＺｒＯ_２纳米粉末复合羊毛纤维研究陈代荣，樊悦朋（山东大学化学系济南２５０１００）关键词ＺｒＯ_２纳米粉末，羊毛纤维，复合纤维由陶瓷粉末和天然纤维形成的复合纤维的强度、织品的保暖性、抗起球性及防缩性能等均有所提高，报道较多的是微米级陶瓷粉末（粒径０．５...     

氨水溶液制备ZnO纳米晶阵列的研究

以氨水和硝酸锌为前躯体，采用低温水溶液法在涂敷ZnO晶种层的玻璃衬底上外延生长了ZnO纳米棒晶阵列。应用SEM、TEM、SAED和XRD表征了ZnO纳米晶的形貌和结构。讨论了该组成体系水溶液法纳米棒外延生长的机理及其对棒晶形貌的影响。通过对水溶液pH值的原位二次调整，制备出了ZnO纳米管和表面绒毛状的棒晶阵列，基于生长机理探讨了它们的形成原因，为实现不同形貌ZnO纳米晶阵列的优化控制提供了可能的技术途径。结果表明，不同形貌的ZnO均属沿c轴择优取向的六方纤锌矿结构。     

含纳米晶颗粒的Yb3+/Er3+共掺透明碲酸盐玻璃陶瓷的光谱性质研究

在组成为15Li2O-15Nb2O5-70TeO2-0.1Er2O3-0.4Yb2O3（%, 摩尔分数）的碲酸盐玻璃基础上, 采用两步热处理法制备了透明的含纳米晶颗粒碲酸盐玻璃陶瓷. 通过X射线衍射（XRD）测试表明, 玻璃陶瓷中的晶体颗粒组成为Yb6Te5O19.2或Er6Te5O19.2, 晶粒尺寸约为55 nm. 根据Judd-Ofelt理论计算了Er^3＋离子在基质玻璃和玻璃陶瓷中的光谱参数Ωt（t＝2, 4, 6）以及Er^3＋：4I15/2→4I13/2跃迁自发辐射几率, 根据McCumber理论计算了Er^3＋：4I13/2→4I15/2跃迁的发射截面. 测试了基质玻璃和玻璃陶瓷的拉曼光谱, 对比研究了铒离子在基质玻璃和玻璃陶瓷中1.5 μm处荧光和上转换光谱特性.