Tween 20-stabilized gold nanoparticles combined with adenosine triphosphate-BODIPY conjugates for the fluorescence detection of adenosine with more than 1000-fold selectivity

This study describes the development of a simple, enzyme-free, label-free, sensitive, and selective system for detecting adenosine based on the use of Tween 20-stabilized gold nanoparticles (Tween 20-AuNPs) as an efficient fluorescence quencher for boron dipyrromethene-conjugated adenosine 5′-triphosphate (BODIPY-ATP) and as a recognition element for adenosine. BODIPY-ATP can interact with Tween 20-AuNPs through the coordination between the adenine group of BODIPY-ATP and Au atoms on the NP surface, thereby causing the fluorescence quenching of BODIPY-ATP through the nanometal surface energy transfer (NSET) effect. When adenosine attaches to the NP surface, the attached adenosine exhibits additional electrostatic attraction to BODIPY-ATP. As a result, the presence of adenosine enhances the efficiency of AuNPs in fluorescence quenching of BODIPY-ATP. The AuNP-induced fluorescence quenching of BODIPY-ATP progressively increased with an increase in the concentration of adenosine; the detection limit at a signal-to-noise ratio of 3 for adenosine was determined to be 60 nM. The selectivity of the proposed system was more than 1000-fold for adenosine over any adenosine analogs and other nucleotides. The proposed system combined with a phenylboronic acid-containing column was successfully applied to the determination of adenosine in urine.     

Analytic hierarchy process for multi-sensor data fusion based on belief function theory

Multi-sensor data fusion is an evolving technology whereby data from multiple sensor inputs are processed and combined. The data derived from multiple sensors can, however, be uncertain, imperfect, and conflicting. The present study is undertaken to help contribute to the continuous search for viable approaches to overcome the problems associated with data conflict and imperfection. Sensor readings, represented by belief functions, have to be fused according to their corresponding weights. Previous studies have often estimated the weights of sensor readings based on a single criterion. Mono-criteria approaches for the assessment of sensor reading weights are, however, often unreliable and inadequate for the reflection of reality. Accordingly, this work opts for the use of a multi-criteria decision aid. A modified Analytical Hierarchy Process (AHP) that incorporates several criteria is proposed to determine the weights of a sensor reading set. The approach relies on the automation of pairwise comparisons to eliminate subjectivity and reduce inconsistency. It assesses the weight of each sensor reading, and fuses the weighed readings obtained using a modified average combination rule. The efficiency of this approach is evaluated in a target recognition context. Several tests, sensitivity analysis, and comparisons with other approaches available in the literature are described.     

Holographic sensors for the determination of ionic strength

Holographic sensors for monitoring ionic strength have been fabricated from charged sulphonate and quaternary ammonium monomers, incorporated into thin, polymeric hydrogel films which were transformed into volume holograms. The diffraction wavelength or reflected colour of the holograms was used to characterise their swelling or de-swelling behaviour as a function of ionic strength in various media. The effects of co-monomer structure, buffer composition, ion composition, pH and temperature were evaluated, whilst the reversibility and reproducibility of the sensor was also assessed. An acrylamide-based hologram containing equal molar amounts of negatively and positively charged monomers was shown to be able to quantify ionic strength independent of the identity of the ionic species present in the test solution. The sensor was fully reversible, free of hysteresis and exhibited little response to pH between 3 and 9 and temperature within the range 20-45 °C. The system was successfully used to quantify the ionic strength of milk solutions, which contain a complex mixture of ions and biological components.     

Silicon-Based Integrated Optic Pressure Sensor Using Intermodal Interference between TM-Like and TE-Like Modes

In this paper, a silicon-based integrated optic pressure sensor using an intermodal interference between the fundamental TM-like and TE-like modes is described. The sensor consists of a micromachined rectangular diaphragm and a straight polystyrene optical waveguide passing over the diaphragm. Its sensitivity is theoretically known to be strongly dependent on the position of the waveguide over the diaphragm. To experimentally investigate such dependence, we fabricated a sensor with a 1.2 mm ×10 mm ×20 μm diaphragm, over which waveguides were placed at 50 μm intervals. The measured phase sensitivity was 98 mrad/kPa for the waveguide nearest to the diaphragm edge. The measurement was also carried out for the other waveguides. As theoretically expected, the largest sensitivity was obtained for the waveguide nearest to the edge.     

Temperature measurements using fiber optic polarization interferometer

A novel measurement method of temperature based on the phenomena that the phase difference between principle polarization states in the optical retarder is function of temperature is described. The polarization state of optical beam is changed as it passes through the optical retarder, which depends on the temperature. The temperature of optical retarder is determined by comparison of the power difference between principal polarization states. We demonstrate successfully the temperature measurement by using a polarization maintaining fiber as the optical retarder. With a 100 mm length of the fiber optic retarder, the change rate of phase difference on temperature was 0.236 rad/°C and the measurement error was ±0.038°C over the temperature range of −2.6 – +3.4°C. With a 11.5 mm length of the fiber optic retarder, the change rate of phase difference on temperature was 0.021 rad/°C and the measurement error was ±0.79°C over the temperature range of −8.5 – +86.5°C.     

La传感器在测定铝液凝固过程中La活度研究

微量稀土加入铝或铝合金中，如果加入方法、数量、时间得当，可明显改善材料的多项性能．稀土对铝及铝合金的影响规律和作用机理，已取得了一些进展，但对稀土铝合金的热力学性质，尤其是溶解态稀土的研究少有报导［‘，2］．本工作采用L即．95C。。。。FZ。。多晶作为固体电解     

钴（Ⅱ）与2,2’-联吡啶-1,1’-二氧化物的多核配合物的合成和性质

以无水CoCl2和2,2’-联吡啶-1,1’-二氧化物为原料,在DMF溶剂中合成了一种多核配合物.经元素分析、紫外光谱、红外光谱和摩尔电导等方法测得它的组成为[Co3(bipyO2)4Cl4]Cl2,并对该配合物的气敏特性进行了研究. 结果表明, 该配合物对氨气有良好的敏感性和选择性.由它制作的传感器可望用于涉氨化工生产中氨浓度的自动测量和控制.     

分子印迹聚合物传感器的研究与发展

综述了分子印迹聚合物的历史发展、制备方法、聚合体系的选择、性能表征及作用机理。主要介绍了其作为传感器敏感膜方面的应用,并对需解决的问题提出了建议。     

表面分子印迹研究进展

为了拓展分子印迹聚合物(Molecularly Imprinted Polymers,MIP)的应用领域,表面分子印迹作为一种新的方法,受到了极大的关注。本文首先分析了MIP传统制备方法存在的问题;然后依据印迹位点所处位置的不同,分类综述了表面分子印迹的各种方法。     

Chemiluminescence sensor for isoniazid with controlled-reagent-release technology

A novel chemiluminescence (CL) sensor for isoniazid combined with flow-injection technology is presented in this paper. The analytical reagents, luminol and ferricyanide, were both immobilized on an anion-exchange column. The CL signal produced by the reaction between luminol and ferricyanide, which were eluted from the column through sodium phosphate injection, was decreased in the presence of isoniazid. The decreased CL intensity was linear with isoniazid concentration in the range 0.001–1.0 μg·ml⁻¹; and the detection limit was 0.35 ng·ml⁻¹ (3s). The whole process, including sampling and washing, could be completed in 2 min with a relative standard deviation of less than 4.1%. The sensor could be reused more than 400 times and has been applied for the determination of isoniazid in pharmaceutical preparations.