木质素在塑料中的应用

总结了国内外近10年来木质素在塑料中的应用进展，重点对木质素在PVC、PP、PE、PF、PU等5个方面的研究成果进行了系统阐述，并对该技术的发展方向进行了分析预测。     

Synthesis and properties of the nanocomposite of zink oxide and poly(amic acid)

The composite comprised of zinc oxide quantum dots and poly(amic acid) (PAAc) was prepared and studied by X-rays diffraction, X-ray photoelectron spectroscopy, light scattering, UV absorbance and UV fluorescence. The UV absorbance of the ZnO/PAAc composite was found to be much larger than that of its components taken separately. The fluorescence of the ZnO/PAAc composite was found to be shifted to longer wavelengthes in comparison with pure ZnO. The presence of the dopant dodecylbenzenesulfonic acid was found to affect the observed fluorescence.     

Microstructure and high-temperature wear resistance of a laser surface alloyed γ-TiAl with carbon

TiC reinforced composite coating on γ-TiAl alloy was successfully fabricated by laser surface alloying with carbon. The fine TiC reinforcing phase had a gradient distribution in the coating, and its growth morphology of TiC in laser surface alloyed coating was in unique faceted platelet-like. The composite coating exhibited high hardness and excellent high-temperature sliding wear resistance.     

ICP-AES测定钛基复合材料中镍、钕和铁的研究

采用ICP－AES法对钛基复合材料中的合金元素镍、钕、铁的测定进行了研究，着重进行了基体元素及待测元素镍、钕、铁之间干扰试验及各元素在测定浓度范围内的线性相关性试验，进行了酸度试验，测定了钛基复合材料中3种元素的含量，得到了较好的精密度和准确度。方法简便、可靠，获得满意的分析结果。     

含氰基的酚醛树脂及其碳纤维复合材料

含氰基的酚醛树脂，具有优异的耐高温性能和高温下的机械强度，在３１５℃下性能变化甚小；不着火，发烟量低，有良好的加工成型性能。热固化过程中氰基成三嗪环而交联，没有小分子脱出，是一类具有广泛发展前景的新型热固性树脂。     

An efficient algorithm for elasto-viscoplastic vibrations of multi-layered composite beams using second-order theory

An efficient time-domain algorithm for plane non-linear flexural vibrations of multi-layered composite beams, which are driven into the inelastic range by severe transverse loadings, is presented. The influence of an axial static preload is considered in the sense of the quasi-linear second-order theory of structures. The inelastic parts of strain are treated as additional sources of selfstress in the linear elastic background-structure, driving the elastic response into the inelastic one. The efficiency of this exact formulation lies in the fact that linear solution techniques can be used in their most powerful form: Rubin's useful formulation for the quasi-static second-order transfer-matrix of linear elastic structures is applied in combination with modal analysis. Having in mind multi-metal beams, the classical lamination theory is assumed to be valid. Beams with overhang composed of ideal elastic-plastic and viscoplastic layers are studied as example structures. The fictitious sources of selfstress are calculated from the different material laws of the layers in a numerical time-stepping procedure, where a generalized midpoint-rule in combination with Crisfield's secant-Newton procedure is used.     

微乳液法制备超细K2Ln2Ti3O10及其光催化活性研究

以钛酸四丁酯、氢氧化钾和镧系金属氧化物为原料。采用微乳液法制备了系列超细K2Ln2Ti3O10（Ln=La．Ce,Pr．Nd，Sm，Eu，Gd）光催化剂。并考察了其光催化活性。通过X射线衍射（XRD）、透射电镜（TEM）和紫外可见吸收光谱（UV—Vis）对其进行了表征。结果表明：用微乳液法制备催化剂可以在较低的温度下（900℃），用较短的烧结时间（3h）合成结晶度高、粒径较小（200Mm）的K2Ln2Ti3O10钙钛矿型层状结构化合物。催化剂在紫外光和可见光条件下均具有光催化降解甲基橙的活性。紫外光条件下可以明显提高光催化降解活性，降解率达到60％。     

Synthesis of polypiperazine-amide thin-film membrane on PPESK hollow fiber UF membrane

A new interfacial polymerization (IP) procedure is developed in order to synthesize polypiperazine-amide thin-film membrane on the inner surface of poly(phthalazinone ether sulfone ketone) (PPESK) hollow fiber ultrafiltration (UF) membrane.A hollow fiber composite membrane with good performance was prepared and studied by FT-IR and scanning electron microscopy.     

Effects of Calcination on the Physical and Photocatalytic Properties of TiO<Subscript>2</Subscript> Powders Prepared by Sol–Gel Template Method

TiO₂ powders were prepared by sol–gel template method and calcined under different conditions. XRD, BET and TEM were used to characterize the TiO₂ powders obtained. The photocatalytic activity of TiO₂ was investigated by the degradation of methyl orange. It was found that TiO₂ powder has the highest photocatalytic activity at a calcination temperature of 673 K. The effects of physical properties such as surface area, crystallinity and crystal phase on the photocatalytic activity of TiO₂ were discussed.     

SYNTHESIS, CROSSLINKING MECHANISM AND PROPERTIES OF A POLYACRYLATE/POLYURETHANE COMPOSITE COATING

A polyacrylate/polyurethane (P(A) / P(U)) composite coating has been prepared bycrosslinking an acetoacetylated polyacrylate with a vinylic group terminated polyurethaneat room temperature. A model Michael reaction between ethyl acetoacetate (EAA) andmethyl acrylate (MA) was designed to study the crosslinking mechanism. It was foundthat the two active hydrogen atoms in acetoacetyl group can both add to vinylic groupsand the yield of mono- and bis-adducts are much affected by the molar ratio of acetoacetylto vinylic groups. Higher crosslinking degree and better properties could be obtained withdecreasing the molar ratio of the two active groups from 1/1 to 0.6/1 in the compositecoatings.