乙酰乙酸基聚丙烯酸酯与端烯基聚氨酯交联反应机理

乙酰乙酸基聚丙烯酸酯与端烯基聚氨酯交联反应机理唐黎明＊郭伟刘德山周其庠（清华大学化工系北京１０００８４）关键词乙酰乙酸基，聚丙烯酸酯，聚氨酯，双键，交联机理１９９６－０８－２０收稿，１９９６－１２－０５修回近年来，含有乙酰乙酸基团的聚合物在涂料、粘合...     

新型PA/PU复合涂料的合成与性能研究

合成了一种高固含量、不含异氰酸根并可在室温固化的新型聚丙烯酸酯－聚氨酯复合涂料（简写为ＰＡ－ＰＵ），其中ＰＡ为侧基含乙酰乙酸基的聚丙烯酸酯，ＰＵ为端烯基聚氨酯。碱催化下，通过具有两个活泼氢的乙酰乙酸基与双键的Ｍｉｃｈａｅｌ加成反应进行交联固化。主要研究了两组份的合成规律及ＰＡ－ＰＵ涂料的性能，结果表明在一定的催化剂用量下，漆膜具有优良的性能     

基于儿茶酚交替共聚物的干湿态双高效胶黏剂材料

以多巴胺(DA)和双酚A型环氧树脂(BAER)进行氨基-环氧点击化学反应, 合成了儿茶酚功能化交替共聚物聚(多巴胺-alt-双酚A型环氧)[P(DA-a-BAER)]. 以FeCl₃为交联剂, 研究了交联剂用量对聚合物在干态及水下环境中黏接性能的影响. 结果表明, 该聚合物可以在干态及水下环境中对多种基材进行黏接. 以不锈钢基材为例, 在干态条件下, 当Fe³⁺与儿茶酚基团的摩尔比为1:3 时, 黏接强度最高, 为(3.03±0.68) MPa; 在水下环境中, 当Fe³⁺与儿茶酚基团的摩尔比为1:6 时, 黏接强度最高, 为(0.65±0.10) MPa. 拉曼光谱(Raman)和紫外-可见光吸收光谱(UV-Vis)分析结果表明, Fe³⁺与儿茶酚基团可通过配位交联和氧化交联的方式增大胶体强度, 从而提高黏接强度.     

甲基丙烯酸3-磺酸钾丙酯-苯乙烯共聚物与N,N,N-三甲基十六烷基溴化铵相互作用研究

两亲分子由于具有自组装性质,如表面活性剂分子自组装形成胶束,囊泡,天然的磷脂分子自组装形成脂质体,继而参于生物膜的形成,这是大家所熟悉的．高分子两亲分子尤其是两亲性两嵌段高分子具有自组装性质,并形成规整性好的聚集体［１～３］．聚电介质 表面活性剂体系...     

聚氨酯脲-丙烯酸酯水分散液的粒径及形态研究

研究了羧基含量、异氰酸酯指数（［ － ＮＣＯ］／［ － ＯＨ］） 、聚氨酯脲与聚丙烯酸酯组成比（ＰＵＵ／ＰＡ） 以及一系列制备工艺因素对聚氨酯脲—丙烯酸酯（ＰＵＡ） 水分散液粒子尺寸及形态的影响。结果表明：羧基含量和ＰＵＵ／ＰＡ 组成比增大或异氰酸酯指数减小都会导致分散液粒径减小;ＰＵＡ 中ＰＡ 含量越大,ＰＵＡ 水分散液粒子形态越不规整;工艺因素如搅拌强度、升温速率等对ＰＵＡ 水分散液粒子尺寸及形态的影响不符合传统乳液聚合的规律。     

Surface modification of proteins by covalent binding of acrylic polymers

Surface modification of enzymes for a potential use in therapy was obtained with a new type of tailor-made copolymers ofNacryloylmorpholine andN-acryloxysuccinimide. The first monomer was designed to confer solubility on the polymer, whereas the second was used to give it reactivity toward protein amino groups. The reactivity of polymers of different composition towards amino acid derivatives and model proteins, such as catalase and ribonuclease-A, is described. Water soluble and catalytically active enzyme derivatives were obained using copolymers prepared with a mixture of N-acryloxysuccinimide andn-acryloylmorpholine in a 1:99 molar ratio. At increasing molar ratio (3:97, 10:90) extensive crosslinking between polymer and enzymes takes place, yielding insoluble adducts.     

Hydrophilic,cationic large‐core star polymers and polymer networks: Synthesis and physicochemical characterization

Group transfer polymerization was used to prepare hydrophilic, cationic large‐core star polymers (LCSPs) and networks of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and ethylene glycol dimethacrylate (EGDMA) in a two‐step procedure involving the synthesis of linear DMAEMA arms, followed by their crosslinking using a mixture of DMAEMA monomer and EGDMA crosslinker. The degree of polymerization of the linear chains prepared in the first step was kept constant, while the composition of the crosslinking mixture was varied systematically at a constant amount of crosslinker. The monomer/crosslinker molar ratio determined whether LCSPs or polymer networks would be produced. In particular, a high monomer/crosslinker molar ratio led to the formation of networks, whereas LCSPs were formed when a low monomer/crosslinker molar ratio was used. The absolute weight‐average molecular weight of the LCSPs was determined using static light scattering, whereas their hydrodynamic radii and radii of gyration were determined using dynamic light scattering and small‐angle neutron scattering, respectively. The sol fraction extracted from the networks decreased as the monomer/crosslinker molar ratio increased. The degrees of swelling of all of the networks were measured as a function of pH and were found to increase below pH 7. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3958–3969, 2008     

H-Bonded Liquid Crystalline Polymer Network Materials

Side-chain copolymers, poly(mOBA-co-mStilb)s, composed of proton acceptors (stilbazoles) and proton donors (benzoic acids) connected to polyacrylate backbone with different methylene spacer lengths (m = 6 and 10) were prepared in different donor/acceptor molar ratios. The H-bonded copolymeric networks were formed once they were synthesized, and showed more homogenous phase than the physical-blended supramolecular networks consisting of donor and acceptor homopolymers, i.e.H-bonded blends of PmOBA and PmStilb. In order to compare the effects of the backbone connection of these H-bonded copolymers and blends, we also built monomer-monomer and polymer-monomer H-bonded complexes of similar structures (shown in Fig. 1). DSC, POM, and powder XRD studies reveal that the copolymers (m = 10)with mole fractions of benzoic acids between 0.33-0.83 show the smectic A (SMA) phase with layer spacing values between 42.22A-50.47A (increases with higher H-bonded crosslinking density between benzoic acids and stilbazoles), while for m = 6, liquid crystalline behavior still can be observed at 0.89 molar fraction of benzoic acids. However, on the basis of powder XRD study it is found that the d spacing values of H-bonded copolymers with m = 6 in the SmA phase increase with higher molar ratios of benzoic acids, which is agreed with the formation of microphase separation due to the hydrogen bonds of benzoic acids connected themselves from the same backbone. The isotropization temperatures of the H-bonded copolymers and blends increase as the molar ratios of benzoic acids increase, while the higher crosslinking density of the H-bonded copolymeric networks and blends can stabilize the liquid crystalline phase.     

新型功能性超支化聚酯的合成及表征

近年来 ,树枝状和超支化聚合物的研究受到了广泛重视 ,被视为 2 1世纪聚合物科学发展的重要方向[1] .这两种聚合物都有大量的端基 ,与相同分子量的线型聚合物相比 ,它们具有更低的粘度和更好的溶解性 .树枝状聚合物具有规整的结构 ,但合成困难 ;超支化聚合物的支化结构不完整 ,可以通过简单的一步聚合获得 ,因此 ,后者受到更广泛的重视 ,也最有可能实现工业化 [2 ,3] .通常 ,超支化聚合物是通过 ABx(x≥ 2 )型单体的缩聚合成的 ,通过改变超支化聚合物的组成、结构及对其端基进行功能修饰 ,可以制备多种具有特殊用途的新材料 ,在粘度改性剂…     

Isobutylene‐rich macromonomers: Dynamics and yields of peroxide‐initiated crosslinking

New isobutylene‐rich elastomers bearing multiple pendant styrenic, acrylic, maleimidic, vinylic, and allylic functional groups have been prepared and examined in the context of peroxide‐initiated crosslinking. Halide displacement from brominated poly(isobutylene‐co‐isoprene) (BIIR) by the requisite carboxylate nucleophiles in homogeneous toluene solutions provide the desired esters in quantitative yield without complications from dehydrohalogenation or premature crosslinking. Heating the resulting macromonomers with dicumyl peroxide to 160 °C under solvent‐free conditions gives thermoset derivatives, with reaction rates and yields depending markedly on functional group structure. In general, high cure extents can only be achieved using highly reactive pendant functional groups, owing to the competitive balance between crosslinking through C?C oligomerization, and degradation through β‐scission of backbone macroradical intermediates. Independent control of crosslinking rates and cure extents is gained through the use of nitroxyl radical traps bearing acrylate functionality. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 123–132     

Formation, structure, thermal and dynamic mechanical behavior of polyurethane networks based on a diethanolamine derivative with mesogenic group

Dynamic mechanical, differential scanning calorimetry and X-ray scattering behavior of ordered polyurethane systems, based on a diol with rigid (mesogenic) group in side chain (D), 2(4)-methyl-1,3-phenylene diisocyanate (DI) and two triols (T)--stiff trimethylolpropane (TMP) or flexible poly(oxypropylene)triol (PPT), was investigated during crosslinking and on the networks. The networks were prepared at various stoichiometric initial molar ratios of the reactive groups, [OH]_T/[NCO]_DI/[OH]_D ranging from 1/2/1 to 1/20/19. From our measurements it follows that: (a) Power-law parameters, which are characteristic of the structure at the gel point (the gel strength S and the relaxation exponent n), are dependent on the initial ratio of the reactants. With increasing content of mesogenic diol in the system (increasing length of elastically active network chains, EANCs), the gel strength S increases and the relaxation exponent n decreases; higher S and lower n are found for stiffer TMP networks in comparison with more flexible PPT ones. (b) Introduction of crosslinks reduces the flexibility of the network chains in fully cured samples and inhibits conformational rearrangements required for ordering. A more complex thermal behavior was found for networks based on TMP in comparison with those based on PPT. (c) Strong physical interactions between the mesogens promote cyclization in the course of crosslinking; the fraction of bonds lost in intramolecular cycles is ∼15% for fully cured networks.     

Synthesis and characterization of polyfunctional crosslinking agents for cyanate resins

An efficient crosslinking monomer for a mixed cyanate/epoxy resin system, bisphenol-A-monocyanate monoglycidyl ether 3 , has been synthesized and characterized. The intermediate compound, the monoglycidyl ether of bisphenol-A 2 , was also isolated and purified by extraction and chromatographic separation using a silica gel column. The cyanate functional group in the crosslinking monomer 3 can be cured easily by heat to form a triazine structure 8 , but the epoxy functional group in the crosslinking monomer 3 can not be cured without affecting the cyanate group because the latter is more reactive both under heat and basic conditions. A practical approach for the application of the crosslinking monomer 3 is discussed and tested. Most interestingly, under heat curing, a very tough and strong resin material was produced from this crosslinking mixed resin mixture. By using a secondary amine, diethylamine, as a curing agent, the cyanate groups in the crosslinking monomer 3 react to form the structures 11 or 12 , depending on the molar ratio of monomer 3 to diethylamine. A bifunctional crosslinking agent for a mixed cyanate (thermoset) and polyolefin (thermoplastic) resin system, 2-allylphenyl cyanate 16 , has also been synthesized and characterized. Like 3 , 2-allylphenyl cyanate 16 easily forms the crosslinking triazine compound 17 upon heating. 17 is a crystalline solid with mp = 110–111°C. As a crosslinking agent, 2-allylphenyl cyanate 16 reacts not only with itself, but also with other cyanates to form heterogeneous triazine rings, exemplified by triazines 18 and 19 . Even though it does not self polymerize through the allyl double bond, it can copolymerize with an other olefinic monomer, such as methyl methacrylate, to form a crosslinked and insoluble polymer. © 1995 John Wiley & Sons, Inc.     

Biocatalytic hydrogels by template polymerization

Novel ionizable hydrogels were prepared from poly(acrylic acid) and dimethylaminoethyl methacrylate monomer employing template polymerization technique as an alternative to traditional physical and chemical crosslinking. The mode of interaction, as proved by Fourier Transform Infrared Spectroscopy (FTIR), was multiple H‐bonding between the tertiary amino group of the monomer and the carboxylic groups of the polymer. The hydrogels represented suitable matrices for enzyme immobilization. The effect of varying the polymer–monomer molar ratio on the swelling kinetics and parameters was investigated. The dynamic swelling isotherm exhibited a Fickian mode of penetrant sorption and a plateau that increases with the amino group content. A polymer complex of molar ratio (polymer:monomer) 0.5:0.8 had a weight swelling ratio of 10 and 7 at pHs 3 and 8, respectively. The proven pH sensitivity together with the amphoteric character of these hydrogels make them good candidates for another bioapplication such as oral delivery systems of therapeutic peptides and proteins. The structural integrity of the hydrogels was proved by their swelling reversibility. β‐Galactosidase, as an acidic model enzyme, was immobilized covalently on the synthesized hydrogels. The maximum enzyme velocity (V_max) was enhanced to 19 µmol/min/mg, for polycomplex of molar ratio 0.5:0.8, compared with 3.2 µmol/min/mg for the free enzyme. Copyright © 2008 John Wiley & Sons, Ltd.     

pH responsiveness of dendrimer-like poly(ethylene oxide)s

Poly(ethylene oxide) (PEO) and poly(acrylic acid) (PAA), two polymers known to form pH-sensitive aggregates through noncovalent interactions, were assembled in purposely designed architecture -a dendrimer-like PEO scaffold carrying short inner PAA chains-to produce unimolecular systems that exhibit pH responsiveness. Because of the particular placement of the PAA chains within the dendrimer-like structure, intermolecular complexation between acrylic acid (AA) and ethylene oxide (EO) units-and thus macroscopic aggregation or even mesoscopic micellization-could be avoided in favor of the sole intramolecular complexation. The sensitivity of such interactions to pH was exploited to generate dendrimer-like PEOs that reversibly shrink and expand with the pH. Such PAA-carrying dendrimer-like PEOs were synthesized in two main steps. First, a fifth-generation dendrimer-like PEO was obtained by combining anionic ring-opening polymerization (AROP) of ethylene oxide from a tris-hydroxylated core and selective branching reactions of PEO chain ends. To this end, an AB(2)C-type branching agent was designed: the latter includes a chloromethyl (A) group for its covalent attachment to the arm ends, two geminal hydroxyls (B(2)) protected in the form of a ketal ring for the growth of subsequent PEO generations by AROP, and a vinylic (C) double bonds for further functionalization of the interior of dendrimer-like PEOs. Reiteration of AROP and derivatization of PEO branches allowed us to prepare a dendrimer-like PEO of fourth generation with a total molar mass of 52,000 g x mol(-1), containing 24 external hydroxyl functions and 21 inner vinylic groups in the interior. A fifth generation of PEO chains was generated from this parent dendrimer-like PEO of fourth generation using a "conventional" AB(2)-type branching agent, and 48 PEO branches could be grown by AROP. The 48 outer hydroxy-end groups of the fifth-generation dendrimer-like PEO obtained were subsequently quantitatively converted into inert benzylic groups using benzyl bromide. The 21 internal vinylic groups carried by the PEO scaffold were then chemically modified in a two-step sequence into bromoester groups. The latter which are atom transfer radical polymerization (ATRP) initiating sites thus served to grow poly(tert-butylacrylate) chains. After a final step of hydrolysis of the tert-butyl ester groups, double, hydrophilic, dendrimer-like PEOs comprising 21 internal junction-attached poly(acrylic acid) (PAA) blocks could be obtained. Dynamic light scattering was used to determine the size of these dendrimer-like species in water and to investigate their response to pH variation: in particular, how the pH-sensitive complexation of EO and AA units affects their overall behavior.     

Polymer‐supported zirconocene catalyst for ethylene polymerization

The use of crosslinked poly(styrene‐co‐4‐vinylpyridine) having functional groups as the support for zirconocene catalysts in ethylene polymerization was studied. Several factors affecting the activity of the catalysts were examined. Conditions like time, temperature, Al/N (molar ratio), Al/Zr (molar ratio), and the mode of feeding were found having no significant influence on the activity of the catalysts, while the state of the supports had a great effect on the catalytic behavior. The activity of the catalysts sharply increased with either the degree of crosslinking or the content of 4‐vinylpyridine in the support. Via aluminum compounds, AlR₃ or methylaluminoxane (MAO), zirconocene was attached on the surface of the support. IR spectra showed an intensified and shifted absorption bands of C N in the pyridine ring, and a new absorption band appeared at about 730 cm⁻¹ indicating a stable bond Al N formed in the polymer‐supported catalysts. The formation of cationic active centers was hypothesized and the performance of the polymer‐supported zirconocene was discussed as well. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 37–46, 1999     

Controlled formation of ag nanoparticles by means of long-chain sodium polyacrylates in dilute solution

A new tool is presented to control formation of Ag nanoparticles. Small amounts of silver ions were added to dilute solutions of long-chain sodium polyacrylates (NaPA). Four NaPA samples covering a molar mass regime of 97 kD < or = Mw < or = 650 kD have been used. With amounts of added Ag(+) as low as 1-2% of the COO(-) groups of the polyanionic chains, significant changes could already be induced in the NaPA coils with 650 kD. If the NaPA concentration was kept below 0.1 g/L, the coils with 650 kD exhibited a significant coil shrinking in stable solutions. At larger NaPA concentrations, addition of Ag+ initiates an aggregation of the polyacrylate coils toward compact structures. Coil shrinking and aggregation was revealed by means of time-resolved static light scattering. If exposed to UV-radiation, small Ag particles formed within the shrunken anionic polyacrylate coils. The Ag nanoparticles were identified by means of an enhanced light scattering and a characteristic plasmon absorption band around 410 nm. No such Ag particle formation could be observed even at 5 times larger concentrations of Ag(+) and NaPA if the two smallest polyacrylate samples have been used under otherwise equal conditions. This molar mass sensitive response of NaPA to Ag(+)-addition suggests an interesting phenomenon: if the coil size of the NaPa chains, which act as Ag(+) collectors, is large enough, local Ag(+) concentration in these coil-shaped Ag(+) containers exceeds a critical value, and irradiation with UV generates Ag nanoparticles.     

Efficient carbonyl hydrosilylation reaction: Toward EVA copolymer crosslinking

In this article, the hydrosilylation reaction of carbonyl groups of acetate derivatives and SiH groups of hydride‐terminated polydimethylsiloxane at high temperature (100–130 °C) are described. Triruthenium dodecacarbonyl, Ru₃(CO)₁₂, was used as effective catalyst for hydrosilylation reaction. The hydrosilylation reactions with octyl acetate and 4‐heptyl acetate were investigated by multinuclear NMR spectroscopy (¹H, ¹³C, and ²⁹Si). This work provides evidence of the addition reaction of SiH groups onto carbonyl groups. The influence of the nature of the acetate structure on the reaction kinetics was shown and the slight contribution of side reactions at high temperature highlighted. Hydrosilylation reaction was extent to the crosslinking of ethylene‐vinyl acetate (EVA) copolymer in the same range of temperature. The formation of EVA chemical network was demonstrated by HR‐MAS NMR spectroscopy and by measuring the gel fraction of EVA chains in hot toluene. From Flory theory, the crosslinking density of elastic strand was calculated to be 80 mol m^?3 in agreement with the measurements from swelling ratio (VA/SiH molar ratio: 11.8). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A simple route to interpenetrating network hydrogel with high mechanical strength

A simple two-step method was introduced to improve the hydrogel mechanical strength by forming an interpenetrating network (IPN). For this purpose, we synthesized polyacrylate/polyacrylate (PAC/PAC), polyacrylate/polyacrylamide (PAC/PAM), polyacrylamide/polyacrylamide (PAM/PAM) and polyacrylamide/poly(vinyl alcohol) (PAM/PVA) IPN hydrogels. The PAC/PAC IPN and PAC/PAM IPN hydrogels showed compressive strength of 70 and 160 kPa, respectively. For the PAM/PAM IPN and PAM/PVA IPN hydrogels, they exhibited excellent tensile strength of 1.2 and 2.8 MPa, and elongations at break of 1750% and 3300%, respectively. A strain relaxation was also observed in the case of PAM series IPN hydrogels. From FTIR, TGA and SEM measurements, we confirmed that physical entanglement, hydrogen bonds and chemical crosslinking played major roles in improving hydrogel strength and toughening. The two-step technique contributes to the understanding of ideal networks, provides a universal strategy for designing high mechanical strength hydrogels, and opening up the biomedical application of hydrogels.     

柠檬酸对Ni2P/TiO2-Al2O3催化剂加氢脱硫性能的影响

采用溶胶-凝胶法制备了TiO2-Al2O3复合载体,以柠檬酸(CA)为络合剂采用浸渍法制备了Ni2P负载的TiO2-Al2O3复合载体催化剂,并用X射线衍射(XRD)、N2吸附比表面积测定、H2程序升温氢还原(H2-TPR)、程序升温氧化(TPO)、X射线光电子能谱(XPS)技术对催化剂的结构和性质进行了表征,考察了CA/Ni摩尔比对在Ni2P/TiO2-Al2O3催化剂上进行的二苯并噻吩(DBT)加氢脱硫(HDS)性能的影响.结果表明:适量的CA可以丰富催化剂的孔道,提高催化剂的比表面积.当n(CA)/n(Ni)=2:1时,催化剂的比表面积达到126.75m2·g-1,与不加CA时相比,提高了57.05m2·g-1.调节n(CA)/n(Ni)能够改善活性相的分布,改变活性相的种类;引入CA使Ni和P前驱体的还原温度明显降低,促进活性相Ni2P的生成,一定程度上能够抑制催化剂表面炭的形成和沉积,提高其稳定性.n(CA)/n(Ni)=2:1时,催化剂具有最好的加氢脱硫活性,在360°C,3.0MPa,氢油比为500(V/V),液时体积空速为2.0h-1的条件下,二苯并噻吩转化率为99.5%,可将模拟油中硫含量由2%(w)降低到0.01%(w).     

Michael addition polymerizations of difunctional amines (AA′) and triacrylamides (B3)

Novel hyperbranched poly(amido amine)s containing tertiary amines on the backbones and acryl or secondary amines as the surface groups were successfully synthesized via the Michael addition polymerizations of a triacrylamide [1,3,5‐triacryloylhexahydro‐1,3,5‐triazine (TT)] and a difunctional amine [n‐butylamine (BA)] NMR techniques were used to clarify the structures of hyperbranched polymers and polymerization mechanism. The reactivity of the secondary amine formed in situ was much lower than that of the primary amines in BA. When the feed molar ratio was 1:1 TT/BA, the secondary amine formed in situ was almost kept out of the reaction before the BA (AA′) and TT (B₃) monomers were consumed, and this led to the formation of A′B₂ intermediates containing one secondary amine group and two acryl groups. The self‐polymerization of the A′B₂ intermediates produced hyperbranched polymers bearing acryl as surface groups. For the polymerization with the feed molar ratio of 1:2 TT/BA, A′₂B intermediates containing one acryl group and two secondary amine groups were accumulated until self‐polymerization started; the self‐polymerization of the intermediates formed hyperbranched polymers with secondary amines as their surface groups. Modifications of surface functional groups were studied to form new hyperbranched polymers. The hyperbranched poly(amido amine)s were amorphous. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6226–6242, 2006