In-situ graft-polymerization preparation of cation-exchange supermacroporous cryogel with sulfo groups in glass columns

Graft polymerization of monomer chains with expected functional groups onto the matrix pore surfaces by initiator is an effective approach for introducing ion-exchange groups to cryogel matrix to get anion- or cation-exchange supermacroporous cryogels. In this work, a novel cation-exchange cryogel with sulfo binding groups was prepared by grafting of 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPSA) onto polyacrylamide-based cryogels in glass columns. The grafting polymerization was achieved in an in-situ manner which was performed by pumping the initiator and the reactive solution of graft monomer with sulfo binding groups directly through a cryogel bed pre-produced in a glass column under frozen condition. The axial liquid dispersion characteristics within the monolithic cryogel beds before and after the in-situ polymerization were compared by measuring residence time distributions (RTDs) at various liquid flow rates using tracer pulse-response method. Microstructure morphology of pores within cryogels was analyzed by scanning electron microscopy (SEM). Chromatography of lysozyme was carried out to reveal the protein breakthrough and elution characteristics in the obtained cryogel beds.     

Characterization of a novel continuous supermacroporous monolithic cryogel embedded with nanoparticles for protein chromatography

A novel continuous supermacroporous monolithic cryogel embedded with nanometer-size particles was prepared by the radical cryogenic co-polymerization of acrylamide (AAm), N,N'-methylene-bis-acrylamide (MBAAm), allyl glycidyl ether (AGE) and the dispersed surfactant-stabilized Fe3O4 nanoparticles under the freezing-temperature variation condition in a glass column. This special separation matrix has interconnected supermacropores with pore size of 10-50 microm, which permit the free-passage of microbial cells or cell debris in the culture fluids and then is interest in downstream processes. The axial liquid dispersion coefficients of the new continuous supermacroporous monolithic bed at different liquid flow rates were obtained by measuring residence time distributions (RTDs) using tracer pulse-response method. The experimental results showed that the axial liquid dispersion within the bed was weak in a wide water flow rate of 0.5-15 cm/min. The axial dispersion coefficient was found to be increased exponentially with the increase of liquid flow rate. Chromatographic process of bovine serum albumin (BSA) in the cryogel monolithic bed was carried out to reveal the protein breakthrough and elution characteristics. Compared with other reported cryogel beds in literature, the protein adsorption capacity of the present cryogel bed was improved due to the embedded nano-sized solid adsorbents in the gel matrix. Microstructure morphology of the embedded nanoparticles in the cryogel and the gel matrix structure were also analyzed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) in this paper.     

Preparation of supermacroporous cryogels with improved mechanical strength for efficient purification of lysozyme from chicken egg white

A novel, facile, and robust strategy was proposed to increase the pore size and mechanical strength of cryogels. By mixing the monomers of acrylamide and 2‐hydroxyethyl methacrylate as the precursor, a monolithic copolymer cryogel with large interconnected pores and thick pore walls was prepared. Hydrogen bonding between the two monomers contributed to the entanglement and aggregation of the copolymers, thickening the pore walls and resulting in larger pore sizes. Analysis via mercury porosimetry demonstrated that the interconnected pore diameter of the copolymer cryogel ranged from 10‐350 µm, which was far larger than that of the cryogels from one monomer (10‐50 µm). Additionally, the thicker pore walls of the copolymer cryogel improved its mechanical strength. Affinity cryogels were prepared through covalent immobilization using Tris(hydroxymethyl)aminomethane as a coupling agent, and the affinity binding of lysozymes on Tris‐cryogel was evaluated by the Langmuir isothermal adsorption with the maximum adsorption capacity of 360 mg/g. Compared with that of the Tris‐cryogels produced from one monomer, the copolymer Tris‐cryogel exhibited higher adsorption capacity and lysozyme purity, when the chicken egg white solution flowed solely driven by gravity. This work provides a new avenue for designing and developing supermacroporous cryogels for bioseparation.     

Immobilization of Inulinase on Concanavalin A-Attached Super Macroporous Cryogel for Production of High-Fructose Syrup

In this study, concanavalin A (Con A)-attached poly(ethylene glycol dimethacrylate) [poly(EGDMA)] cryogels were used for immobilization of Aspergillus niger inulinase. For this purposes, the monolithic cryogel column was prepared by radical cryocopolymerization of EGDMA as a monomer and N,N′-methylene bisacrylamide as a crosslinker. Then, Con A was attached by covalent binding onto amino-activated poly(EGDMA) cryogel via glutaraldehyde activation. Characterization of cryogels was performed by FTIR, EDX, and SEM studies. Poly(EGDMA) cryogels were highly porous and pore size was found to be approximately 50–100 μm. Con A-attached poly(EGDMA) cryogels was used in the adsorption of inulinase from aqueous solutions. Adsorption of inulinase on the Con A-attached poly(EGDMA) cryogel was performed in continuous system and the effects of pH, inulinase concentration, and flow rate on adsorption were investigated. The maximum amount of inulinase adsorption was calculated to be 27.85 mg/g cryogel at 1.0 mg/mL inulinase concentration and in acetate buffer at pH 4.0. Immobilized inulinase was effectively used in continuous preparation of high-fructose syrup. Inulin was converted to fructose in a continuous system and released fructose concentration was found to be 0.23 mg/mL at the end of 5 min of hydrolysis. High-fructose content of the syrup was demonstrated by thin layer chromatography.     

DNA adsorption via Co(II) immobilized cryogels

The separation and purification of important biomolecule deoxyribonucleic acid (DNA) molecules are extremely important. The adsorption technique among these methods is highly preferred as the adsorbent cryogels are pretty much used due to large pores and the associated flow channels. In this study, the adsorption of DNA via Co(II) immobilized poly(2-hydroxyethyl methacrylate-glycidyl methacrylate) [poly(HEMA-GMA)] cryogels was performed under varying conditions of pH, interaction time, initial DNA concentration, temperature, and ionic strength. For the characterization of cryogels; swelling test, Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), surface area (BET), elemental and ICP-OES analysis were performed. L-lysine amino acid was chosen as Co(II)-chelating agent and the adsorption capacity of cryogels was determined as 33.81 mg DNA/g cryogel. Adsorption of pea DNA was studied under the optimum adsorption conditions and DNA adsorption capacity of cryogels was found as 10.14 mg DNA/g cryogel. The adsorption process was examined via Langmuir and Freundlich isotherm models and the Langmuir adsorption model was determined to be more appropriate for the DNA adsorption onto cryogels.     

Isolation of ATP from a yeast fermentation broth using a cryogel column at high flow velocities

This communication presents an effective method for isolating adenosine triphosphate (ATP) from a yeast fermentation broth using an anion‐exchange supermacroporous cryogel column at high flow velocities. The breakthrough and elution behaviors of pure ATP in the cryogel bed were investigated at flow velocities of 2, 5, and 10 cm/min and the ATP binding capacities were determined. Then the ATP‐containing yeast fermentation broth was employed as the test feedstock and various chromatographic runs were conducted to isolate ATP by the cryogel at different high flow velocities. The ATP samples obtained were analyzed quantitatively by HPLC. The results showed that even at a flow velocity of 5 or 10 cm/min, a product purity of 97.4 or 98.0% can be achieved, illustrating the potential of the present method for separation of high‐purity ATP directly from fermentation feedstock at high flow velocities.     

Nondestructive technique for the characterization of the pore size distribution of soft porous constructs for tissue engineering

Polymer scaffolds tailored for tissue engineering applications possessing the desired pore structure require reproducible fabrication techniques. Nondestructive, quantitative methods for pore characterization are required to determine the pore size and its distribution. In this study, a promising alternative to traditional pore size characterization techniques is presented. We introduce a quantitative, nondestructive and inexpensive method to determine the pore size distribution of large soft porous solids based on the on the displacement of a liquid, that spreads without limits though a porous medium, by nitrogen. The capillary pressure is measured and related to the pore sizes as well as the pore size distribution of the narrowest bottlenecks of the largest interconnected pores in a porous medium. The measured pore diameters correspond to the narrowest bottleneck of the largest pores connecting the bottom with the top surface of a given porous solid. The applicability and reproducibility of the breakthrough technique is demonstrated on two polyurethane foams, manufactured using the thermally induced phase separation (TIPS) process, with almost identical overall porosity (60-70%) but very different pore morphology. By selecting different quenching temperatures to induce polymer phase separation, the pore structure could be regulated while maintaining the overall porosity. Depending on the quenching temperature, the foams exhibited either longitudinally oriented tubular macropores interconnected with micropores or independent macropores connected to adjacent pores via openings in the pore walls. The pore size and its distribution obtained by the breakthrough test were in excellent agreement to conventional characterization techniques, such as scanning electron microscopy combined with image analysis, BET technique, and mercury intrusion porosimetry. This technique is suitable for the characterization of the micro- and macropore structure of soft porous solids intended for tissue engineering applications. The method is sensitive for the smallest bottlenecks of the largest continuous pores throughout the scaffold that contributes to fluid flow.     

A simplified synthesis of polymeric nonparticulate stationary phases with macrocyclic antibiotic as chiral selector for capillary electrochromatography

A simplified approach to synthesize nonparticulate (continuous or monolithic) beds with embedded vancomycin chiral selectors for capillary electrochromatography is proposed. In the present approach, N,N'-diallyltartardiamide monomer with diol functionality is used, which can be readily converted to aldehyde groups via periodate treatment. Parallel to the activation of the polymeric matrix for covalent attachment of vancomycin, the periodate treatment has shown secondary effects on the polymeric bed morphology, namely the increase of the average pore size and porosity of the skeleton. Inversed size-exclusion chromatography was applied to characterize porosimetric properties of the capillary columns before and after the periodate treatment. Electroosmotic and enantioselective properties of the nonparticulate beds synthesized are presented. The approach is of more general interest attaching different affinity groups to the polymeric matrix and/or enhancing the accessibility to the active sites, for instance, in the molecular imprinting technique.     

Cryogenic Designing of Biocompatible Blends of Polyvinyl alcohol and Starch with Macroporous Architecture

The present paper discusses synthesis, characterization, and blood compatibility studies of macroporous cryogels of PVA and starch. Biocompatible spongy porous hydrogels of polyvinyl alcohol–starch have been synthesized by repeated freezing–thawing methods and characterized by Infra red (FTIR) and environmental scanning electron microscopy (ESEM) techniques, respectively, to gain insights for structural and morphological features. The FTIR analysis of prepared cryogels indicated that starch was introduced into the network of cryogel possibly via formation of hydrogen bonds between the PVA and starch clusters. The “cryogels” were evaluated for their water uptake potentials and influence of various factors such as chemical architecture of the spongy hydrogels, pH and temperature of the swelling bath were investigated on the degree of water sorption by the cryogels. The hydrogels were also swollen in salt solutions and various simulated biological fluids. The biocompatibility of the prepared cryogels was judged by in vitro methods of blood–clot formation viz. percent haemolysis and protein (BSA) adsorption. The cryogels were also studied for their pores morphology and percent porosity and the effect of chemical composition on the extent of porosity was also investigated.     

A study of cryostructuring of polymer systems. 34. Poly(vinyl alcohol) composite cryogels filled with microparticles of polymer dispersion

Macroporous filled and unfilled poly(vinyl alcohol) (PVA) cryogels are produced by cryogenic treatment (freezing at ?20°C for 12 h followed by thawing at a rate of 0.03°C/min) of mixtures of an aqueous PVA solution and a full-component poly(vinyl acetate) (PVAc) dispersion or its individual components. The values of the elasticity modulus and fusion temperature are determined for obtained samples; their microstructure is studied by light microscopy of thin sections. It is shown that the effects that are induced by the incorporation of PVAc dispersion into the macroporous matrix of the PVA cryogel are due to the presence of both a discrete phase, i.e., solid PVAc microparticles, and ingredients of the liquid phase of the PVAc dispersion, mainly, urea. Therewith, the dispersed particles themselves serve as a reinforcing filler, i.e., increase the rigidity and (to a lesser extent) heat endurance of the cryogel, while urea, which possesses chaotropic properties and hinders the intermolecular hydrogen bonding of PVA chains, reduces the rigidity and heat endurance of the composites. As a result, the total effect is determined by the competition of differently directed influences of these components of PVAc dispersion and depends on its concentration in the resulting filled cryogel. It is also shown that PVAc microparticles are mainly entrapped in the gel phase of the macroporous matrix and form necklacelike aggregates, the cross-sectional areas and lengths of which depend on the degree of composite filling.     

Direct chromatographic capture of enzyme from crude homogenate using immobilized metal affinity chromatography on a continuous supermacroporous adsorbent

A continuous supermacroporous matrix has been developed allowing direct capture of enzyme from non-clarified crude cell homogenate at high flow-rates. The continuous supermacroporous matrix has been produced by radical co-polymerization of acrylamide, allyl glycidyl ether and N,N'-methylene-bis(acrylamide) which proceeds in aqueous solution of monomers frozen inside a column (cryo-polymerization). After thawing, the column contains a continuous matrix having interconnected pores of 10-100 microm size. Iminodiacetic acid covalently coupled to the cryogel is a rendering possibility for immobilized metal affinity chromatographic purification of recombinant His-tagged lactate dehydrogenase, (His)6-LDH, originating from thermophilic bacterium Bacillus stearothermophilus, but expressed in Escherichia coli. The large pore size of the adsorbent makes it possible to process particulate-containing material without blocking the column. No preliminary filtration or centrifugation is needed before application of crude extract on the supermacroporous column. A total of 210 ml crude homogenate, 75 ml of it non-clarified, was processed on a single 5.0 ml supermacroporous column at flow speeds up to 12.5 ml/min without noticeable impairment of the column properties. Mechanically the cryogel adsorbent is very stable. The continuous matrix could easily be removed from the column, dried at 70 degrees C and kept in a dry state. After rehydration and reinsertion of the matrix into an empty column, (His)6-LDH was purified as efficiently as on the newly prepared column. The procedure of manufacturing the supermacroporous continuous cryogel is technically simple. Starting materials and initiators are cheap and available and are simply mixed and frozen under specified conditions. Altogether these qualities reveal that the supermacroporous continuous cryogels is a very interesting alternative to existing methods of protein purification from particulate-containing crude extracts.     

Electrohydrodynamics in hierarchically structured monolithic and particulate fixed beds

We have investigated the basic dependence of electroosmotic flow (EOF) velocity and hydrodynamic dispersion in capillary electrochromatography (CEC) on the variation of applied field and mobile phase ionic strengths employing silica-based particulate and monolithic fixed beds. These porous media have a hierarchical structure characterized by discrete intraparticle (intraskeleton) mesoporous and interparticle (interskeleton) macroporous spatial domains. While the macroporous domains contain quasi-electroneutral electrolyte solution, the ion-permselectivity (charge-selectivity) of the mesoporous domains determines the co-ion exclusion and counter-ion enrichment at electrochemical equilibrium (without superimposed electrical field) which depends on mesopore-scale electrical double layer (EDL) overlap and surface charge density. This adjustable, locally charge-selective transport realized under most general conditions forms the basis for concentration polarization (CP) induced by electrical fields superimposed in CEC. CP characterizes the formation of convective diffusion boundary layers with reduced (depleted CP zone) and increased (enriched CP zone) electrolyte concentration, respectively, at the anodic and cathodic interfaces in fixed beds containing the cation-selective, silica-based particles (or monolith skeleton). CP originates in the electrical field-induced coupled mass and charge transport normal to the charge-selective interfaces and has consequences for the EOF dynamics, hydrodynamic dispersion, and analyte retention in CEC. A secondary EDL with mobile counter-ionic space charge can be induced in the depleted CP zone leading to induced-charge EOF in the macroporous domains. It is characterized by a nonlinear dependence of the average EOF velocities on applied field strength and strong local velocity components tangential to the surface which enhance lateral pore-scale dispersion, thereby decreasing (axial) zone spreading. Differences in the pore space morphology of random-close sphere packings and monoliths criticially affect the intensity of CP and induced-charge EOF in these materials. CP is identified as a key phenomenon in CEC which also influences effective migration and the retention of charged analytes because the local intensity of CP inherently depends on applied field and mobile phase ionic strengths.     

Supercritical,Freezing and Thermal Drying Process of Resorcinol‐Formaldehyde Polymer based Nano‐carbons and their Highly Loaded PtRu Anode Electrocatalyst for DMFC

The capillary condensation is affected by micropore and nanopore of catalyst layer on fuel cell. Due to limitation of sluggish mass transport and electrocatalytic activity, to retain the pore skeleton of carbon and metal nanoparticles are very significant for enhanced utilizations of pore structure in electrochemical reaction. Besides, thickness of electrocatalyst layer is very crucial due to one of the factor affected by cell performance of direct methanol fuel cell. Highly loaded four Pt?Ru anode catalysts supported on resorcinol‐formaldehyde (RF) polymer based on meso‐porous carbons (80 wt.% Pt?Ru/carbon cryogel, 80 wt.% Pt?Ru/carbon xerogel and 80 wt.% Pt?Ru/carbon aerogel) and conventional carbon (80 wt.% Pt?Ru/Vulcan XC‐72) were prepared by colloidal method for direct methanol fuel cell. These catalysts were characterized by X‐Ray diffraction (XRD), High resolution transmission electron microscopy (HR‐TEM) and X‐ray photoemission (XPS). The results of CO stripping voltammetry, cyclic voltammetry (CV) and single cell test performed on DMFC show that Pt?Ru/carbon cryogel and Pt?Ru/carbon aerogel exhibits better performances in comparison to Pt?Ru/carbon xerogel and Pt?Ru/Vulcan XC‐72. It is thus considered that particle size, oxidation state of metal and electrochemical active surface area of these catalysts are important role in electrocatalytic activity in DMFC.     

Super macroporous poly(N‐isopropyl acrylamide) cryogel for separation purpose

Polymers that can respond reversibly by changing their physical or chemical properties are recognized as stimuli‐responsive polymers. The renowned temperature‐sensitive polymer is poly(N‐isopropyl acrylamide) (p(NIPAM)), and here, homopolymeric supermacroporous p(NIPAM)) cryogel was synthesized via cryopolymerization technique at cryogenic condition (below melting point of solvent, −18°C). Then, the prepared p(NIPAM) cryogel was characterized via scanning electron microscopy, Fourier transform infrared radiation spectrometer, and thermogravimetric analyzer. The lower critical solution temperature (LCST) value of the prepared p(NIPAM) cryogel was determined from % swelling equilibrium swellings at various temperatures, 20, 25, 30, 35, 40, 45, and 50°C, respectively. Furthermore, the pore volume and porosity of p(NIPAM) cryogels were compared below and above the LCST values. Finally, the separation capability of p(NIPAM) cryogels for some molecules such as tannic acid, gallic acid, nicotine (N), and caffeine (C) was investigated at the below and above the LCST values.     

Fluid dynamics in capillary and chip electrochromatography

This review is concerned with the phenomenological fluid dynamics in capillary and chip electrochromatography (EC) using high-surface-area random porous media as stationary phases. Specifically, the pore space morphology of packed beds and monoliths is analyzed with respect to the nonuniformity of local and macroscopic EOF, as well as the achievable separation efficiency. It is first pointed out that the pore-level velocity profile of EOF through packed beds and monoliths is generally nonuniform. This contrasts with the plug-like EOF profile in a single homogeneous channel and is caused by a nonuniform distribution of the local electrical field strength in porous media due to the continuously converging and diverging pores. Wall effects of geometrical and electrokinetic nature form another origin for EOF nonuniformities in packed beds which are caused by packing hard particles against a hard wall with different zeta potential. The influence of the resulting, systematic porosity fluctuations close to the confining wall over a distance of a few particle diameters becomes aggravated at low column-to-particle diameter ratio. Due to the hierarchical structure of the pore space in packed beds and silica-based monoliths which are characterized by discrete intraparticle (intraskeleton) mesoporous and interparticle (interskeleton) macroporous spatial domains, charge-selective transport prevails within the porous particles and the monolith skeleton under most general conditions. It forms the basis for electrical field-induced concentration polarization (CP). Simultaneously, a finite and -- depending on morphology -- often significant perfusive EOF is realized in these hierarchically structured materials. The data collected in this review show that the existence of CP and its relative intensity compared to perfusive EOF form fundamental ingredients which tune the fluid dynamics in EC employing monoliths and packed beds as stationary phases. This addresses the (electro)hydrodynamics, associated hydrodynamic dispersion, as well as the migration and retention of charged analytes.     

PVA-DNA cryogel membranes: characterization, swelling, and transport studies

Double-stranded (ds) DNA from salmon testes has been incorporated into PVA hydrogels obtained by a technique of repeated freezing and thawing. The cryogels obtained are free of potential toxic species like chemical cross-linkers, and consequently, they can be used in pharmaceutical or medical applications. These cryogels show a good mechanical resistance and a white and opaque appearance caused by a heterogeneous porous structure. Encapsulated DNA molecules can be in a compacted or an extended conformation in the PVA matrix and can be controlled by tailoring the degree of crystallinity of the PVA network; this is supported by fluorescence microscopy and UV and FTIR spectroscopic studies. The two forms of encapsulated DNA were observed for different types of matrixes: an extended one in a more crystalline network and a globular one in a more amorphous one. Different associations of base pairs have also been observed. PVA cryogel crystallinity could be tailored by the cryogel contact with different salt solutions. Cryogel surface (scanning electron microscopy) and bulk morphology (porosimetry), swelling, DNA retention, and delivery kinetics have also been studied. All these investigations clearly show strong interactions between PVA and DNA.     

PolyGuanine methacrylate cryogels for ribonucleic acid purification

The isolation and purification of ribonucleic acid have attracted attention recently for the understanding of the functions in detail because of the necessity for the treatment of genetic diseases. In this study, guanine‐incorporated polymeric cryogels were developed to obtain highly purified ribonucleic acid. The satisfactory purification performance was achieved with the guanine‐incorporated poly (2‐hydroxyethyl methacrylate‐guanine methacrylate) cryogels. The most crucial advantages to use guanine as a functional monomer are to obtain a real natural interaction between guanine on the polymeric material and cytosine on the ribonucleic acid. Moreover, using cryogel with a highly porous structure and high swelling ratio provide advantages of getting more water within the structure to get more analyte to interact. The characterization of cryogels has proved the success of the synthesis and the perfect natural interaction to be taken place between the ligand (guanine methacrylate) and the cytosine in the ribonucleic acid molecules. Although the pores within the structure of cryogels are small, they provide efficient and fast adsorption. The chromatographic separation performance was investigated for different conditions (pH, temperature etc.). The desorption ratio and reusability were also analyzed at the end of the five adsorption–desorption cycles with no significant changes.     

Humic acid particle embedded super porous gum Arabic cryogel network for versatile use

Super porous gum Arabic (GA) cryogels were synthesized by crosslinking of natural GA with divinyl sulfone at cryogenic conditions, −20°C for potential biomedical applications. Humic acid (HA) nanoparticles were also prepared by using degradable and biocompatible crosslinkers such as trimethylolpropane triglycidyl ether, poly(ethylene glycol) diglycidyl ether, and trisodium trimetaphosphate in a single step and then entrapped within GA cryogel network as GA/HA particle cryogel. Furthermore, GA/HA cryogel was used as a template for Ag, Cu, and Fe nanoparticle preparation, and their antimicrobial properties were tested against Escherichia coli, Staphylococcus aureus, and Bacillus subtilis strains. The minimum inhibition concentration values of Ag and Cu nanoparticle‐loaded GA/HA cryogel composites were determined as 10 mg mL⁻¹. Furthermore, the blood compatibility tests such as hemolysis and blood clotting indexes were determined for GA cryogels and found to be more compatible with 0.08 ± 0.01% hemolysis and 89.4 ± 6.1 blood clotting values, whereas the hemolysis of the Ag, Cu, and Fe nanoparticle‐loaded GA/HA Ag, Cu, and Fe metal nanoparticle cryogel composites decreased in the order of Fe > Cu > Ag nanoparticles.     

Evaluation of protein-A chromatography media

In process-scale antibody purification, protein-A affinity chromatography is commonly used as the initial purification step. In this paper, two different protein-A media were evaluated. These adsorbents have a porous glass backbone with different pore sizes: 700 A and 1000 A. Adsorption equilibrium data of human immunoglobulins on these media were measured via a batch technique and correlated using the Langmuir isotherm model. A larger static capacity was found for the smaller pore size material, which is probably a result of the larger specific surface area and associated higher ligand concentration. The protein uptake kinetics were also obtained via a stirred tank experiment using different initial protein concentrations. A surface layer model was used to represent the protein uptake by the media and to estimate values of a concentration-independent effective diffusivity within the particle. Experimental breakthrough curves were also obtained from packed beds operated under different conditions. Calculated breakthrough profiles were found to be in good agreement with the experimental results. Experimental breakthrough data were used to determine the dependence of the dynamic capacity of the media as a function of the fluid residence time. A larger dynamic capacity was also found for the smaller pore size media. The permeability of large scale packed beds was also reported and used in conjunction with the dynamic capacity to calculate the process production rate.     

Composite Zn(II) Ferrocyanide/Polyethylenimine Cryogels for Point-of-Use Selective Removal of Cs-137 Radionuclides

The feasibility of several approaches to the fabrication of monolith composite cryogels containing transition-metal ferrocyanides for Cs⁺ ion uptake has been evaluated. Although in the series of investigated metal ion precursors (Cu(II), Zn(II), Ni(II), and Co(II)), in situ formation of the sorption active phase in polyethyleneimine (PEI) cryogel was feasible only in the case of Zn(II) ferrocyanide, this approach has shown significant advantages over the immobilization of ex situ synthesized ferrocyanide nanoparticles. Nanoparticles of the mixed ferrocyanide Zn_1.85K_0.33[Fe(CN)₆] formed in situ had an average size of 516 ± 146 nm and were homogeneously distributed in the monolith located at the polymer surface rather than embedded in the matrix. The Young modulus of the PEI cryogel increased after modification from 25 to 57 kPa, but composites maintained high permeability to the flow. Sorption of Cs⁺ ions has been investigated at superficial velocity up to 8 m/h. Steep breakthrough profiles and uptake efficiency of >99.5% until breakthrough point confirmed that a supermacroporous structure of the monolith composite assured good mass transfer, so that intraparticle diffusion was not the limiting stage of sorption kinetics. Application of the rate-constant distribution model (RCD model) to analyze the breakthrough curves of Cs⁺ sorption allowed the identification of two types of sorption sites with a difference in sorption rate constants of ~1 log unit. Most likely, sorption on “fast” sorption sites was governed by ion exchange between Cs⁺ ions in solution and K⁺ ions in the ferrocyanide lattice. Cs-137 radionuclide removal was investigated using the monolith composite columns of various geometries at superficial velocity up to the 6.6 m/h; specific gamma activity was reduced from 265 kBq/L to the background level, showing high potential of these materials for POU application.