Phase behavior and solubilization of microemulsion systems containing Gemini imidazoliums and their monomeric analogues

The Gemini imidazolium surfactants with a four-methylene spacer group [C_n(Bim)₂-2Br, n?=?12, 14, 16] and their corresponding monomers [C_nmimBr, n?=?12, 14, 16] were synthesized and characterized. The phase behavior and solubilization of microemulsion systems containing C_n(Bim)₂-2Br/butan-1-ol/octane/brine as well as microemulsion systems containing C_nmimBr/butan-1-ol/octane/brine were studied and compared. The C_n(Bim)₂-2Br-based microemulsion systems have greater solubilization ability than that of the corresponding mono surfactants C_nmimBr-based systems. As the carbon chain lengths of the surfactants [C_n(Bim)₂-2Br and C_nmimBr] increase, the mass fraction of the alcohol in the interfacial layer A ^S would decrease, whereas the solubilization ability (SP*) would increase. The maximum solubilization ability (SP*) of the two microemulsion systems was attained when the oil/water mass ratio (α) approaches 0.5. The solubilization ability of both microemulsion systems would increase with increasing NaCl concentrations in aqueous phase. In C_n(Bim)₂-2Br-based microemulsion systems, the alcohol is significantly more soluble in aqueous phase than in the oleic phase. And it was noted that the alcohol is more soluble in C_n(Bim)₂-2Br-based systems than in C_nmimBr-based systems in both aqueous and oleic phases.     

Synthesis and characterization of N,N,N′,N′-tetraalkyl-4-oxaheptanediamide as extractant for extraction of uranium(VI) and thorium(IV) ions from nitric acid solution

Tridentate ligand N,N,N′,N′-tetraoctyl-4-oxaheptanediamide(TOOHA) and other three analogous diamides have been prepared and characterized by using NMR spectra and element analysis. The extraction of UO₂ ²⁺ and Th⁴⁺ with the present extractants was investigated at 293 ± 1 K from nitric acid solutions. n-Octane was found to be the most suitable diluent in the present study compared with other diluents tested. Extraction distribution ratios (D) of U(VI) and Th(IV) have been studied as a function of aqueous concentrations of HNO₃, extractant concentrations. The results indicated that U(VI) is mainly extracted as UO₂(NO₃)₂·2TOOHA. In the case of Th⁴⁺ ion, the possible compositions of extracted species in organic phase were presumed to be Th(NO₃)₄·2TOOHA and Th(NO₃)₄·3TOOHA. In addition, the influence of concentration of sodium nitrate as salting-out agent on the distribution ratio of U(VI) and Th(IV) with TOOHA was also evaluated.     

Interaction Between GMAC-m-CS and Surfactants: Surface Tension and Conductivity Methods

Glycidyl trimethyl ammonium chloride-modified chitosan (GMAC-m-CS) was synthesized through nucleophilic substitution of GMAC on CS in isopropanol dispersed system, which was characterized by FTIR and ¹H NMR methods. The interaction between GMAC-m-CS and surface active ILs ?1-dodecyl (tetradecyl and hexadecyl)-3-methylimidazolium bromide (C_nmimBr, n = 12, 14, 16) was studied by surface tension and conductivity methods. The amount of C_nmimBr adsorbed on GMAC-m-CS increases first with raising temperature, and then decreases, which reaches the largest amount at 30°C. The amount increases with the increase of alkyl chain length. The surface tension reducing capabilities of GMAC-m-CS/C_nmimBr systems increase with temperature, however, decrease with the increase of GMAC-m-CS concentration. The aggregation processes of C₁₄mimBr in solutions without GMAC-m-CS and with high concentration of GMAC-m-CS were entropy driven; however, it is enthalpy driven in solutions with low concentration of GMAC-m-CS. Based on the analysis of properties of GMAC-m-CS/C_nmimBr, the interaction model of GMAC-m-CS/ILs was proposed.     

Adsorption of UO2 2+ on poly(N,N-diethylacrylamide-co-acrylic acid): effects of pH, ionic strength, initial uranyl concentration, and temperature

We prepared poly(N,N-diethylacrylamide-co-acrylic acid) (P(DEA-co-AA)) microgels which could efficiently remove UO₂ ²⁺ from aqueous solutions. In this study, the effect of adsorption parameters such as pH value, adsorbent dose, shaking time, and temperature has investigated. It is found that the pseudo-second-order model is more suitable for our experiment. The adsorption kinetic data indicated that the chemical adsorption was the swiftness processes, the adsorption equilibrium could be achieved within 30 min. And there are very good correlation coefficients of linearized equations for Langmuir isotherm model, which indicated that the sorption isotherm of the hydrogel for UO₂ ²⁺ can be fitted to the Langmuir isotherm model. The adsorption process was spontaneous (?G ⁰ < 0) and exothermic (?H ⁰ < 0). The adsorbed UO₂ ²⁺ can be desorbed effectively by 0.1 M HNO₃ and the adsorption capacity is not significantly reduced after five cycles. Present study suggests that this P(DEA-co-AA) can be used as a potential adsorbent for sorption UO₂ ²⁺ and also provide a simple, fast separation method for removal of UO₂ ²⁺ ions from aqueous solution.     

Encapsulating nanosilica into polyacrylic acid and chitosan interpenetrating network hydrogel for preconcentration of uranium from aqueous solutions

Polyacrylic acid, Chitosan and nanosilica particles composite (PCNS) was prepared for enrichment of U (VI) from aqueous solutions. Adsorption tests controlled by different parameters including contact time, pH, initial concentration of UO₂²⁺ and coexistence ions were examined. FTIR, SEM and EDX studies proved the formation of composite and confirmed efficient adsorption of UO₂²⁺ by PCNS. The experimental datas fit the Langmuir and pseudo-second-order models, the R_L (0.115–0.645) indicates the adsorption of UO₂²⁺ onto PCNS are favorable. The value of q_m (451.118 mg g^?1) and adsorption–desorption experiments showed PCNS hydrogel can be reckoned as a high efficienct and sustainable material for removal of U (VI).     

Room Temperature Ionic Liquids: Their Cohesive Energies,Solubility Parameters and Solubilities in Them

The cohesive energies of room temperature ionic liquids, RTILs, at the reference temperature T _ref = 298.15 K have been obtained from their molar enthalpies of vaporization. They are ce(298) = ?_v H°(298) ? 298.15R, on regarding the vapors as single ion-paired molecules. The cohesive energy densities, ced = ce/V = δ _H ² are the squares of the (Hildebrand) solubility parameters of the RTIL, which are presented for many RTILs. The solubilities of a variety of solutes in RTILs are discussed in relation to the solubility parameters. It turned out that the δ _H values of RTILs, obtained from the enthalpies of vaporization, may be used for empirical correlations, but are not able to predict the solubilities of solutes in RTILs.     

The uranium recovery from aqueous solutions using amidoxime modified cellulose derivatives. IV. Recovery of uranium by amidoximated hydroxypropyl methylcellulose

Amidoxime modified hydroxypropyl methylcellulose (HPMC) films (HPMC-g-AO) were used for the recovery of uranium from aqueous solutions by a complexation process. The adsorption experiments were carried out by immersion of a certain amount of films in UO₂ ²⁺ solutions (resultant pH 4.1) ranging in concentration from 100 to 1,000 ppm. The effect of temperature (25–50 °C) on the adsorption capacity of HPMC-g-AO was investigated at the optimized time. The adsorption kinetics and the thermodynamics as well as the adsorption capacity of HPMC-g-AO films were investigated. The adsorption capacity was found as 765 mg UO₂ ²⁺/g dry film. The kinetic and the thermodynamic parameters (i.e. activation energy, enthalpy, entropy and Gibbs free energy) for the interaction of UO₂ ²⁺ with HPMC-g-AO were calculated based on known basic relations. The results showed that adsorption occurred through strong electrostatic interactions with an enthalpy of ?36.5 kJ/mol. The desorption of UO₂ ²⁺ were investigated using different desorption agents such as EDTA, HCl, NaHCO₃, and NaOH. After the 2 weeks treatment period, the highest desorption yield were found as 23 % with NaHCO₃.     

Interactions of two homologues of cationic surface active ionic liquids with sodium carboxymethylcellulose in aqueous solution

In the preceding paper of this series, we studied the interactions of copolymers with the ionic liquids, 1-alkyl-3-methylimidazolium bromide (C _n mimBr, n?=?8, 10, 12, 14, 16) and N-alkyl-N-methylpyrrolidinium bromide (C _n MPB, n?=?12, 14, 16). An obvious difference was detected between the interaction mechanism and the alkyl chain length of the surfactant. In the present study, we performed a systematic study on the interaction of sodium carboxymethylcellulose (NaCMC) with ionic liquids in aqueous solution by isothermal titration microcalorimetry (ITC), conductivity, turbidity, and dynamic light scattering (DLS) measurements. The existence of electrostatic attraction between NaCMC and ILs could increase the complexity of these systems. The results show that the monomers of C₈mimBr can bind to the NaCMC chains and form free surfactant micelles in the solution, while no micelle-like C₈mimBr/NaCMC cluster is detected. For other surfactants, the formation of surfactant/NaCMC clusters in the solution is driven by electrostatic and hydrophobic interactions, which could be divided into two types. One type is the polymer-induced surfactant/NaCMC complexes that form in the solution for the surfactant of C _n mimBr (n?=?10, 12, 14) or C _n MPB (n?=?12, 14). The other type is that the surfactant-induced surfactant/NaCMC complexes come into being for the surfactant of C₁₆mimBr or C₁₆MPB. Finally, the different modes of complex formation proposed have a good interpretation of the experiment results, unraveling the details of the effect of surfactant alkyl chain length and headgroup on the surfactant–NaCMC interactions.     

Thermodynamics of cesium complexes formation with 18-crown-6 in ionic liquids

Thermodynamic data for cesium complexes formation with 18-crown-6 (18C6, L) [Cs(18C6)]⁺ in N-butyl-4-methyl-pyridinium tetrafluoroborate ([BMPy][BF₄], I), in 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄], II) and in 1-butyl-3-methylimidazolium dicyanamide ([BMIM][N(CN)₂], III) were measured with NMR ¹³³Cs technique at 23–50 °C. The stability of cesium complex in RTILs is estimated to be in the range between water and DMFA. Stability constants for [Cs(18C6)]⁺ are found to decrease as temperature is increasing. The following values for lgK(Cs+L) and ΔH(Cs+L) at 23 °C are determined: 2.6 (0.3), ?47(1) kJ/mol (RTIL I); 2.8(0.3), ?80(3) kJ/mol (RTIL II) and 3.03 (0.08), ?47(2) kJ/mol (RTIL III). It is demonstrated that enthalpy change promotes complex formation while the corresponding change of entropy is negative and provides decomposition of [Cs(18C6)]⁺.     

Impact of environmental conditions on the sorption behavior of UO<Subscript>2</Subscript><Superscript>2+</Superscript> onto attapulgite studied by batch experiments

The sorption of UO₂ ²⁺ from aqueous solution on attapulgite was investigated as a function of contact time, solid content, pH, ionic strength, foreign ions, humic acid (HA), and fulvic acid (FA) under ambient conditions by using batch technique. The attapulgite sample was characterized by XRD and FTIR in detail. The results indicated that the sorption of UO₂ ²⁺ was strongly dependent on pH and ionic strength. The sorption of UO₂ ²⁺ on attapulgite increased quickly with rising pH at pH < 6.5, and decreased with increasing pH at pH > 6.5. The presence of HA or FA enhanced the sorption of UO₂ ²⁺ on attapulgite obviously at low pH because of the strong complexation of surface adsorbed HA/FA with UO₂ ²⁺ on attapulgite surface. Sorption of UO₂ ²⁺ on attapulgite was mainly dominated by ion-exchange or outer-sphere surface complexation at low pH values, but by inner-sphere surface complexation at high pH values. The results indicate that attapulgite is a very suitable adsorbent for the preconcentration and solidification of UO₂ ²⁺ from large volumes of aqueous solutions because of its negative surface charge and large surface areas.     

Synthesis and crystal structure of [UO2CrO4(C5NH5COO)] · 0.25H2O

[UO₂CrO₄(C₅NH₅COO)] · 0.25H₂O crystals have been synthesized and studied by X-ray diffraction and IR spectroscopy. The compound crystallizes in monoclinic system with the unit cell parameters a = 7.2362(3) ?, b = 13.8847(6) ?, c = 10.7204(5) ?, ?? = 90.037(2)°, space group P2₁/n, Z = 4, R = 0.0236. The structure consists of [UO₂CrO₄(C₅NH₅COO)] chains, which run in the direction [100] and correspond to the AT³B⁰¹ crystallochemical formula, where A = UO ₂ ²⁺ , T³ = CrO ₄ ^2? , and B⁰¹ is nicotinic acid molecules in the form of zwitter ions. The results of analyzing nonbonded interactions in the crystal structure by the method of molecular Voronoi-Dirichlet polyhedra (MMVDP) are presented.     

On the coordination symmetry of the hydrated uranyl ion

The literature indicates a four-fold or six-fold coordination symmetry for UO²⁺₂ in aqueous solution. However, the uranyl ion in crystalline UO₂(ClO₄)₂·7H₂O has been found by X-ray diffraction to be coordinated by five water molecules. From the MCD of aqueous UO₂(ClO₄)₂·nH₂O we have found evidence for five-fold coordination. A tentative assignment for the excited states in the visible spectrum is also proposed.     

Preparation and Crystal Structure of a New Uranyl Sulfate Templated by a Bis-isothiouronium Cation

Crystals of a new uranyl sulfate (C₂N₄H₈S₂)[UO₂(SO₄)₂] · 0.3H₂O ( 1 ) templated by a relatively rare bis-isothiouronium cation, were formed upon evaporation of aqueous solutions containing uranyl acetate, thiourea, and excess sulfuric acid. The new compound is orthorhombic, P2₁2₁2₁, a = 6.928(2) Å, b = 13.398(3) Å, c = 15.225(3) Å, Z = 2. Its crystal structure is comprised of [UO₂(SO₄)₂] moieties linked by hydrogen bonds formed between the template cations and terminal oxygen atoms of the sulfate tetrahedra. The C₂N₄H₈S₂²⁺ template is most likely formed in situ during a redox reaction between uranyl cation and thiourea in a strongly acidic medium, with UO₂²⁺ partially reduced to U⁴⁺.     

Excess molar quantities of (a halogenated n-alkane + an n-alkane) A comparative study of mixtures containing either 1-chlorobutane or 1,4-dichlorobutane

Excess molar volumes V_m^E at 298.15 K were obtained, as a function of mole fraction x, for series I: {x1-C₄H₉Cl + (1 ? x)n-C_lH_{2l + 2}}, and II: {x1,4-C₄H₈Cl₂ + (1 ? x)n-C_lH_{2l + 2}}, for l = 7, 10, and 14. 10, and 14. The instrument used was a vibrating-tube densimeter. For the same mixtures at the same temperature, a Picker flow calorimeter was used to measure excess molar heat capacities C_{p, m}^E at constant pressure. V_m^E is positive for all mixtures in series I: at x = 0.5, V_m^E/(cm³ · mol^?1) is 0.277 for l = 7, 0.388 for l = 10, and 0.411 for l = 14. For series II, V_m^E of {x1,4-C₄H₈Cl₂ + (1 ? x)n-C₇H₁₆} is small and S-shaped, the maximum being situated at x_max = 0.178 with V_m^E(x_max)/(cm³ · mvl^?1) = 0.095, and the minimum is at x_min = 0.772 with V_m^E(x_min)/(cm³ · mol^?1) = ?0.087. The excess volumes of the other mixtures are all positive and fairly large: at x = 0.5, V_m^E/(cm³ · mol^?1) is 0.458 for l = 10, and 0.771 for l = 14. The C_{p, m}^Es of series I are all negative and |C_{p, m}^E| increases with increasing l: at x = 0.5, C_{p, m}^E/(J · K^?1 · mol^?1) is ?0.56 for l = 7, ?1.39 for l = 10, and ?3.12 for l = 14. Two minima are observed for C_{p, m}^E of {x1,4-C₄H₈Cl₂ + (1 ? x)n-C₇H₁₆}. The more prominent minimum is situated at x′_min = 0.184 with C_{p, m}^E(x′_min)/(J · K^?1 · mol^?1) = ?0.62, and the less prominent at x″_min = 0.703 with C_{p, m}^E(x″_min)/(J · K^?1 · mol^?1) = ?0.29. Each of the remaining two mixtures (l = 10 and 14) has a pronounced minimum at low mole fraction (x_min = 0.222 and 0.312, respectively) and a broad shoulder around x = 0.7.     

Organoclay modified with lignin as a new adsorbent for removal of Pb2+ and UO2 2+

This study investigated a new adsorbent prepared from lignin modified organoclay for the removal of Pb²⁺ and UO₂ ²⁺ from aqueous solutions. The characterization of new adsorbent was performed by FT-IR and XRD. Adsorption of Pb²⁺ and UO₂ ²⁺ species in aqueous solution as a function of ion concentration, pH, temperature and time of adsorption was investigated in detail. The adsorption data were analyzed by using the Langmuir, Freundlich and Dubinin-Radushkevich models. The monolayer adsorption capacities of organoclay–lignin were 0.12 mol kg^?1 and 0.42 mol kg^?1 for Pb²⁺ and UO₂ ²⁺, respectively. The experimental kinetic data were analyzed by using pseudo-second-order kinetic and intra-particle diffusion models. The proposed adsorption mechanism follows a pseudo-second-order kinetic and endothermic because of increasing disorderliness at adsorbate/adsorbent interface.     

Poly[[[diaqua­dioxouranium(VI)]‐μ3‐nitriliotriacetato‐κ3O:O′:O′′] trihydrate]

The basic units in the structure of the title compound, {[UO₂(C₆H₇NO₆)(H₂O)₂]·3H₂O}_n, are ribbons in which every UO₂²⁺ cation is coordinated in a monodentate manner to three tridentate‐bridging nitriliotriacetate dianions. Hydrogen bonds bind the ribbons into a three‐dimensional structure.     

Study of variation in thermophysical properties of RE<Subscript>6</Subscript>UO<Subscript>12</Subscript>(s) along the lanthanide series

The novel ligand N,N,N′′′′,N′′′′-tetrabutyl-N′′′,N′′′-(N″,N″-diethyl)-ethidene bisdiglycolamide (TBEE-BisDGA) and other eight analogous extractants have been synthesized and characterized by NMR and HRMS. The solvent extraction of Th⁴⁺, UO₂ ²⁺ and Eu³⁺ from nitric acid solution using the above BisDGA extractants was investigated in 1-dodecanol at 30 ± 1 °C. The extractants exhibited higher affinity toward Th⁴⁺ than UO₂ ²⁺ and Eu³⁺ in the present system. The maximum value of separation factor SF _Th(IV)/U(VI) and SF _{Th(IV)/Eu(III)} is 78.5 and 53.3 respectively for TBEE-BisDGA, 88.1 and 69.5 respectively in the case of TB ^i-PE-BisDGA at 3 M HNO₃ solution.     

Calorimetric effects of short-range orientational order in solutions of benzene or n-alkylbenzenes in n-alkanes

A Picker flow microcalorimeter was used to determine molar excess heat capacities, C^E_p, at 298.15 K, as function of concentration, for the eleven liquid mixtures: benzene+n-tetradecane; toluene+n-heptane, and +n-tetradecane; ethylbenzene+n-heptane, +n-decane, +n-dodecane; and +n-tetradecane; n-propylbenzene +n-heptane, and +n-tetradecane; n-butylbenzene+n-heptane, and +n-tetradecane. In addition, molar excess volumes, V^E, at 298.15 K, were obtained for each of these systems (except benzene+n-tetradecane) and for toluene+n-hexane. The excess volumes which are generally negative with a short alkane, increase and become positive with increasing chain length of the alkane. The excess heat capacities are negative in all cases. The absolute ¦C^E_p¦ increased with increasing chain length of the n-alkane. A formal interchange parameter, C_p12, is calculated and its dependence on n-alkane chain length is discussed in terms of molecular orientations.     

Transition metal complexes with thiosemicarbazide-based ligands

Solvate complexes of UO ₂ ²⁺ andN(1), N(4)-bis(salicylidene)-S-methylisothiosemicarbazone, (H₂Me-L¹), of general formula [UO₂(Me-L¹)S] (S= H₂O, MeOH, EtOH, Py, DMF and DMSO) were synthesized. The methanolic UO ₂ ²⁺ ” adducts of N(1)-benzoylisopropylidene-N(4)-salicylidene-S-alkylisothiosemicarbazone, (H₂R-L²,R=Me, Prⁿ) of general formula [UO₂(R-L²)· MeOH], were also prepared. Thermal decomposition of the complexes was investigated in air and argon. The complexes decompose to α-U₃O₈ in air, while in argon the decomposition is not completed up to 1000 K. The temperature and the mechanism of decomposition of the complexes are a function of the solvent belonging to the inner coordination sphere.     

Interaction between two homologues of cationic surface active ionic liquids and the PEO-PPO-PEO triblock copolymers in aqueous solutions

The interaction of nonionic triblock copolymers of poly(ethyleneoxide) (PEO) and poly(propyleneoxide) (PPO) (PEO_nPPO_mPEO_n) with a series of cationic surface-active ionic liquids in aqueous solutions have been investigated. The cationic surface-active ionic liquids include 1-alkyl-3-methylimidazolium bromide (C_nmimBr, n?=?8, 10, 12, 14, 16) and N-alkyl-N-methylpyrrolidinium bromide (C_nMPB, n?=?12, 14, 16). For different polymer-surfactant systems, the critical aggregation surfactant concentration (cac), the surfactant concentration to form free micelles (C _m), and the saturation concentration of surfactant on the polymer chains (C ₂) were determined using isothermal titration microcalorimetry (ITC) and conductivity measurements. The structure of the formed aggregates depended strongly on the hydrophobicity of the surfactant and the ratio of polymer/surfactant concentration. For C₈mimBr, there were not any micelle-like surfactant?Cpolymer clusters detected in the solution, and only micelles appeared. For other surfactants, the polymer?Csurfactant aggregates were formed in the solution, which was verified by the appearance of a broad endothermic peak in the ITC thermograms. The intensity of polymer?Csurfactant interaction increased with the hydrophobicity of the surfactants and the polymers but was not affected by the surfactant headgroups.