The Preparation and Characterization of La Doped TiO2 Nanotubes and Their Photocatalytic Activity

La-doped TiO₂ nanotubes (La/TiO₂ NTs) were prepared by the combination of sol-gel process with hydrothermal treatment. The prepared samples were characterized by using transmission electron microscopy, x-ray diffraction, x-ray photoelectron spectra, and ultraviolet-visible spectra. The photocatalytic performance of La/TiO₂ NTs was studied by testing the degradation rate of methyl orange under ultraviolet (UV) irradiation. The results indicated La/TiO₂ NTs calcined at 300°C consisted of anatase as the unique phase. The absorption spectra of the La/TiO₂ NTs showed a stronger absorption in the UV range and a slight red shift in the band gap transition than that of pure TiO₂ nanotubes. The photocatalytic performance of TiO₂ NTs could be improved by the doping of lanthanum ions, which is ascribed to several beneficial effects the formation of Ti-O-La bond and charge imbalance, existing of oxygen defects and Ti³⁺ species, stronger absorption in the UV range and a slight red shift in the band gap transition, as well as higher equilibrium dark adsorption of methyl orange. 0.75 wt% La/TiO₂ NTs had the best catalytic activity.     

Microstructure and hydrogen production activity of Pt–TiO2 prepared by precipitation–photodeposition

A series of Pt–TiO₂ photocatalysts were prepared by a facile precipitation–photoreduction method under different pH conditions, using H₂PtCl₆ as platinum precursor. The microstructure and chemical state of Pt loaded on the surface of TiO₂ were analyzed by X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). It was revealed that the size and distribution of Pt nanoparticles on TiO₂ surface is closely related to the initial pH of H₂PtCl₆ solution. The optimal pH value for forming highly dispersed Pt nanoparticles is 12. The photocatalytic activities of the prepared samples were investigated in terms of hydrogen production. The results indicated that the Pt–TiO₂ sample prepared by precipitation–photodeposition method shows much higher activity than that prepared by traditional photodeposition method.     

Structural evaluation and photocatalytic properties of Pt-supported titanate nanotubes

Pt nanocrystal-supported titanate nanotubes as a photocatalyst were prepared by hydrothermal treatment and subsequent heat-treatment in H₂ atmosphere (H₂ reduction) of a mixture of these titanate nanotubes and H₂PtCl₆. TEM results showed that Pt nanoparticles (a few nm in diameter and 5 to 10 nm in length) with good crystallinity were entrapped inside titanate naotubes and were closely precipitated on the surface of titanate nanotubes. These Pt nanocrystal-supported titanate nanotubes possessed the high ability for HCHO decomposition.     

Synthesis of metal-doped tio2 nanotubes and their catalytic performance for low-temperature co oxidation

Summary Gold-, gold and copper-doped TiO₂ nanotubes (Au/TiO₂ NTs, Au-Cu/TiO₂ NTs) are prepared by impregnation-reduction method. The doped nanotubes are characterized by powder X-ray diffraction (XRD) and transmission electron microscopy (TEM). Their catalytic performance for CO oxidation is also examined     

浸渍-分解法制备高可见光催化活性的Bi2O3/TiO2纳米管阵列

用浸渍-分解法将Bi₂O₃纳米颗粒沉积在TiO₂纳米管壁上, 制备了Bi₂O₃/TiO₂纳米管阵列. 用电感耦合等离子体发射光谱(ICP-AES)测定了Bi₂O₃/TiO₂ 纳米管阵列的化学组分, 利用X 射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)和紫外-可见(UV-Vis)吸收光谱表征了所制备的样品. 通过在可见光下(λ>400 nm)降解甲基橙(MO)水溶液来评价样品的光催化活性. 结果表明, Bi₂O₃纳米颗粒均匀地沉积在TiO₂纳米管中. Bi₂O₃/TiO₂纳米管阵列具有比纯Bi₂O₃膜和N-TiO₂纳米管阵列高得多的可见光催化活性. Bi₂O₃/TiO₂纳米管阵列活性的增强是其强可见光吸收和Bi₂O₃与TiO₂之间形成的异质结的协同作用的结果.     

Enhancement of ethanol electrooxidation on plasmonic Au/TiO2 nanotube arrays

Novel electrocatalysts Au/TiO₂ nanotube arrays (Au/TiO₂NTs) were prepared by loading low-content(1.9 at.%) of Au nanoparticles (AuNPs) onto highly ordered TiO₂ nanotube arrays (TiO₂NTs). Ethanol electrooxidation indicates that visible-light (λ > 400 nm) irradiation can significantly enhance the activity as well as resistpoisoning of Au/TiO₂NTs electrocatalysts that are activated by plasmon resonance. Au/TiO₂NTs catalysts calcinated at 300 °C display the highest performance due to the strong synergistic interactions between TiO₂ and Au NPs. The combination of visible-light irradiation with a controllable potential offers a new strategyfor enhancing the performance of anodes in direct ethanol fuel cell (DEFC).     

Synthesis,characterization of B-doped TiO<Subscript>2</Subscript> nanotubes with high photocatalytic activity

B-doped TiO₂ nanotubes (B/TiO₂ NTs) were prepared by the combination of sol–gel process with hydrothermal treatment. The prepared catalysts were characterized by XRD, TEM and XPS. The photocatalytic activity of B/TiO₂ NTs was evaluated through the photodegradation of aqueous methyl orange. The results demonstrated that the 1.5% B/TiO₂ NTs calcined at 300 °C possessed the best photocatalytic activity. Compared with pure TiO₂ nanotubes, the doping with B significantly enhanced the photocatalytic efficiency.     

In Situ ATR-FTIR and UV-Visible Spectroscopy Study of Photocatalytic Oxidation of Ethanol over TiO2 Nanotubes

The photocatalytic oxidation of ethanol over TiO₂ nanotubes (NTs) was investigated by in situ attenuated total reflection using Fourier transform infrared spectroscopy (ATR-FTIR) and ultraviolet (UV)-visible spectroscopy. In the ATR-FTIR study, the TiO₂ NTs were spread in a ZnSe crystal trough that was used as the reactor. The evolution of the reaction under UV irradiation was investigated by in situ monitoring of changes in the species at the surface of the TiO₂ NTs. Ethanol adsorbed on the TiO₂ NTs surface, forming alkoxide and hydroxide groups, which were then attacked by ^?OH, with the formation of a vinyl alcohol intermediate that was finally transformed to acetic acid. In addition, the species changes in the reaction solution were also investigated by in situ UV-visible spectroscopy using a small volume flow-through cell. The UV-visible data further confirmed the oxidation mechanism of ethanol on TiO₂ NTs elucidated by ATR-FTIR data.     

Pulsed electrodeposition of Pt nanoclusters on carbon nanotubes modified carbon materials using diffusion restricting viscous electrolytes

A simple method for achieving high dispersion and small platinum nanoparticles down to only 2 or 3 nm on structured carbon supports (carbon nanotubes-modified PAN-based carbon fiber and carbon nanotubes-modified graphite foil) is presented. Pulsed electrodeposition of Pt nanoparticles was performed at increased viscosity of the H₂PtCl₆ containing electrolyte by addition of glycerol. The catalyst nanoparticle size can be controlled by varying the amount of glycerol added into the aqueous H₂PtCl₆ solution, and adjusting the number of the potential pulses. The shape and size of the Pt nanoparticles was characterized by scanning electron microscopy and transmission electron microscopy. The electrocatalytic properties of Pt nanoparticles with respect to O₂ and H₂O reduction were investigated by means of cyclic voltammetry, and the improved catalytic activity of the Pt nanoparticles/carbon nanotubes surfaces could be proved.     

Antimony Doped Tin Oxide Nanoparticles Deposited onto Nb−TiO2 Nanotubes for Electrochemical Degradation of Bio‐refractory Pollutions

To improve the service life of SnO₂?Sb electrodes in degradation of refractory wastewater, we report anodic information of tin oxide antimony on top of Nb?TiO₂ nanotubes (Nb?Ti/Nb?TiO₂?NTs/ATONPs) prepared through screen‐printing. It was found that the Nb?Ti/Nb?TiO₂?NTs/ATONPs anodes presented a significantly enhanced in electro‐catalytic oxidation performance (in Acid Red 73) compared to titanium‐based tin antimony electrodes (Ti/ATONPs). Additionally, the electrochemical properties and the stability were further studied by the electrochemical impedance spectroscopy (EIS), linear sweep voltammetry (LSV), cyclic voltammetry (CV), chronoamperometry (CA) measurements and accelerated life test, respectively. These results indicated that Nb?TiO₂?NTs/ATONPs anode possessed Nb?TiO₂ nanotubes which exhibited a higher oxygen evolution potential (2.24 V vs. Ag/AgCl), as well as a better wettability, a larger current at constant potential and 2.1 times longer lifetime than the conventional Ti/ATONPs anode.     

Degradation of ofloxacin by UVA-LED/TiO<Subscript>2</Subscript> nanotube arrays photocatalytic fuel cells

The degradation of ofloxacin (OFX) at low concentration in aqueous solution by UVA-LED/TiO₂ nanotube arrays photocatalytic fuel cells (UVA-LED/TiO₂ NTs PFCs) was investigated. TiO₂ nanotube arrays (TiO₂ NTs) photoanode prepared by anodization-constituted anatase–rutile bicrystalline framework. The results indicated that the degradation efficiency of OFX by UVA-LED/TiO₂ NTs PFC was significantly enhanced by 14.3% compared with UVA-LED/TiO₂ NTs photocatalysis. The pH affected the degradation efficiency markedly; the highest degradation efficiency (95.0%) and the pseudo-first-order reaction rate constant k value (0.049 min^?1) were achieved in neutral condition (pH 7.0). The degradation efficiency increased with the increasing concentration of dissolved oxygen (DO) in the UVA-LED/TiO₂ NTs PFC. The main reactive species of OFX degradation are positive holes (h⁺) and superoxide ion radicals (O ₂ ^·? ) in a DO sufficient condition. Furthermore, the possible pathways of OFX degradation were proposed.     

自掺杂TiO2纳米管：液相制备及光催化性能

采用水合肼（N₂H₄·H₂O）作为还原剂,在液相环境中制备了自掺杂TiO₂纳米管阵列（NTs）。利用FE-SEM、EDS、XPS、XRD、Raman、UV-Vis/NIR分光光度法以及半导体特性分析系统（Keithley 4200 SCS）分别对样品的形貌,晶体结构,光学特性以及电学性能进行了表征。结果表明：通过这种方法制备的自掺杂TiO₂NTs在带隙中引入了大量的氧空位,创造了氧空位能级,从而提高了样品的电导率,有效提高光生电子-空穴对的产生、分离和传输。此外,由于氧空位的作用,使得TiO₂NTs的带隙变窄,增强了可见光吸收能力,致使样品具有较高的光催化活性,并通过降解甲基橙溶液对样品的光催化活性进行评估。结果显示当光照150min后,自掺杂TiO₂NTs对甲基橙溶液的降解率达73%,并且这种催化剂便于回收和重复使用。     

Photoelectrochemical water splitting and simultaneous photoelectrocatalytic degradation of organic pollutant on highly smooth and ordered TiO2 nanotube arrays

The photoelectrochemical water splitting and simultaneous photoelectrocatalytic degradation of organic pollutant were achieved on TiO₂ nanotube electrodes with double purposes of environmental protection and renewable energy production under illumination of simulated solar light. The TiO₂ nanotube arrays (TiO₂ NTs) were fabricated by a two-step anodization method. The TiO₂ NTs prepared in two-step anodization process (2-step TiO₂ NTs) showed much better surface smoothness and tube orderliness than TiO₂ NTs prepared in one-step anodization process (1-step TiO₂ NTs). In the photoelectrochemical water splitting and simultaneous photoelectrocatalytic decomposition process, the 2-step TiO₂ NTs electrode showed both highest photo-conversion efficiency of 1.25% and effective photodecomposition efficiency with existing of methylene blue (MB) as sacrificial agent and as pollutant target. Those results implied that the highly ordered nanostructures provided direct pathway and uniform electric field distribution for effective charges transfer, as well as superior capabilities of light harvesting.     

High Electrocatalytic Activity of Pt–Pd Binary Spherocrystals Chemically Assembled in Vertically Aligned TiO2 Nanotubes

To obtain noble metal catalysts with high efficiency, long‐term stability, and poison resistance, Pt and Pd are assembled in highly ordered and vertically aligned TiO₂ nanotubes (NTs) by means of the pulsed‐current deposition (PCD) method with assistance of ultrasonication (UC). Here, Pd serves as a dispersant which prevents agglomeration of Pt. Thus Pt–Pd binary catalysts are embed into TiO₂ NTs array under UC in sunken patterns of composite spherocrystals (Sps). Owing to this synthesis method and restriction by the NTs, the these catalysts show improved dispersion, more catalytically active sites, and higher surface area. This nanotubular metallic support material with good physical and chemical stability prevents catalyst loss and poisoning. Compared with monometallic Pt and Pd, the sunken‐structured Pt–Pd spherocrystal catalyst exhibits better catalytic activity and poison resistance in electrocatalytic methanol oxidation because of its excellent dispersion. The catalytic current density is enhanced by about 15 and 310 times relative to monometallic Pt and Pd, respectively. The poison resistance of the Pt–Pd catalyst was 1.5 times higher than that of Pt and Pd, and they show high electrochemical stability with a stable current enduring for more than 2100 s. Thus, the TiO₂ NTs on a Ti substrate serve as an excellent support material for the loading and dispersion of noble metal catalysts.     

甲醇重整反应中Pt/γ-Al2O3催化剂纳米Pt粒径与催化性能关系研究

利用硝基甲烷还原法在室温条件下得到了纳米Pt粒径可控的担载Pt/γ-Al₂O₃催化剂, 并利用甲醇重整反应为反应探针考察了Pt粒径与催化反应性能之间的关系, 发现催化反应的性能与担载贵金属颗粒粒径之间存在明显的相关性. 通过透射电镜(TEM)、X射线衍射(XRD)、程序升温还原(TPR)等测试手段对催化剂进行表征, 发现钠米Pt的粒径大小不但影响甲醇重整反应的活性, 同时也影响反应的选择性, 即催化剂的催化性能与担载贵金属粒径之间存在明显的尺度效应.     

Plasmonic Spherical Nanoparticles Coupled with Titania Nanotube Arrays Prepared by Anodization as Substrates for Surface-Enhanced Raman Spectroscopy Applications: A Review

As surface-enhanced Raman spectroscopy (SERS) continues developing to be a powerful analytical tool for several probes, four important aspects to make it more accessible have to be addressed: low-cost, reproducibility, high sensibility, and recyclability. Titanium dioxide nanotubes (TiO₂ NTs) prepared by anodization have attracted interest in this field because they can be used as safe solid supports to deposit metal nanoparticles to build SERS substrate nanoplatforms that meet these four desired aspects. TiO₂ NTs can be easily prepared and, by varying different synthesis parameters, their dimensions and specific features of their morphology can be tuned allowing them to support metal nanoparticles of different sizes that can achieve a regular dispersion on their surface promoting high enhancement factors (EF) and reproducibility. Besides, the TiO₂ photocatalytic properties enable the substrate’s self-cleaning property for recyclability. In this review, we discuss the different methodological strategies that have been tested to achieve a high performance of the SERS substrates based on TiO₂ NTs as solid support for the three main noble metal nanoparticles mainly studied for this purpose: Ag, Au, and Pt.     

Highly controlled coating of biomimetic polydopamine in TiO2 nanotubes

Highly controlled coating of biomimetic polydopamine (PDA) was achieved on titanium dioxide nanotubes (TiO₂ NTs) by exposing TiO₂ NT arrays to a slightly alkaline dopamine solution. The thin films act as photonic sensitizers (enhancing photocurrents and photodegradation) in the visible light range. The PDA coatings can furthermore be used as a platform for decorating the TiO₂ NTs with different co-catalysts and metal nanoparticles (NPs).     

Direct Electrochemistry of Hemoglobin on Vertically Aligned Carbon Hybrid TiO2 Nanotubes and Its Highly Sensitive Biosensor Performance

The present work is focused on developing a novel biomaterial platform to achieve enhanced direct electron transfer (DET) of hemoprotein and higher biosensor performance on vertically aligned carbon hybrid TiO₂ nanotubes (C‐TiO₂ NTs). Using a simple surfactant‐assisted method, controllable hybridization of TiO₂ NTs with conductive amorphous carbon species is realized. The obtained C‐TiO₂ NTs is ingeniously chosen to serve as an ideal "vessel" for protein immobilization and biosensor applications. Results show that the appropriate hybridization of C into TiO₂ NTs leads to a much better conductivity of TiO₂ NTs without destroying their preponderant tubular structures or damaging their excellent biocompatibility and hydrophilicity. When used in loading proteins, the C‐TiO₂ NTs can be used as a super vessel for rapid and substantive immobilization of hemoglobin (Hb), with a large surface electroactive Hb coverage ( Γ ??) of 3.3×10^?9 mol·cm^?2. Enhanced DET of Hb is commendably observed on the constructed Hb/C‐TiO₂ NTs biosensor with a couple of well‐defined redox peaks in a fast electron transfer process. The biosensor further exhibits fast response, high sensitivity and stability for the amperometric biosensing of H₂O₂ with the detection limit as low as 3.1×10^?8 mol/L.     

Pyrolysis of chloroplatinic acid to directly immobilize platinum nanoparticles onto multi-walled carbon nanotubes

Platinum nanoparticles supported on multi-walled carbon nanotubes (Pt/MWCNTs) were first prepared by simple pyrolysis of H₂PtCl₆ solution. The structure of Pt/MWCNTs was characterized with X-ray diffraction (XRD), scanning electron microscope (SEM), and the results showed that the diameter of the obtained platinum nanoparticles immobilized on MWCNTs was below 50 nm, although the obtained platinum nanoparticles were not well uniformly dispersed on the surface of MWCNTs. The electrocatalytic performance of Pt/MWCNTs electrode for methanol oxidation reaction (MOR) was also investigated by linear sweep voltammetry (LSV), indicating that it was possible to employ the obtained platinum nanoparticles as anode material in fuel cell. Developing a novel and simple method to prepare platinum nanoparticles onto MWCNTs is the main contribution of this letter. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 8, pp. 1050–1053. The text was submitted the authors in English.     

TiO2 Nanotubes as a Therapeutic Agent for Cancer Thermotherapy

We report the photothermal properties as well as the in vitro cell test results of titanium oxide nanotubes (TiO₂ NTs) as a potential therapeutic agent for cancer thermotherapy in combination with near-infrared (NIR) light. TiO₂ NTs are found to have a higher photothermal effect upon exposure to NIR laser than Au nanoparticles and single-wall carbon nanotubes, which have also attracted considerable interest as therapeutic agents for cancer thermotherapy. The temperature increase of a TiO₂ NT/NaCl suspension during NIR laser exposure is larger than that of a TiO₂ NT/D.I. water suspension due to the heat generated by the formation of Na₂TiF_6. According to the in vitro cell test results the cells exposed to NIR laser without TiO₂ NT treatment have a cell viability of 96.4%. Likewise, the cells treated with TiO₂ NTs but not with NIR irradiation also have a cell viability of 98.2%. Combination of these two techniques, however, shows a cell viability of 1.35%. Also, the cell deaths are mostly due to necrosis but partly due to late apoptosis. These results suggest that TiO₂ NTs can be used effectively as therapeutic agents for cancer thermotherapy due to their excellent photothermal properties and high biocompatibility.