Molecular dynamics simulations of PNIPAM‐co‐PEGMA copolymer hydrophilic to hydrophobic transition in NaCl solution

Classical molecular dynamics simulations were carried out to investigate the hydrophilic to hydrophobic transition of PNIPAM‐co‐PEGMA close to its lower critical solution temperature (LCST) in 1 M NaCl solution. PNIPAM‐co‐PEGMA is a copolymer of poly(N‐isopropylacrylamide) (PNIPAM) and poly(ethylene glycol) methacrylate (PEGMA). The copolymer consists of 38 monomer units of NIPAM with two PEGMA chains attached to the PNIAPM backbone. The PNIPAM‐co‐PEGMA was observed to go through the hydrophilic?hydrophobic conformational change for simulations at temperature slightly above its LCST. Na⁺ ions were found to bind strongly and directly with amide O, even more strongly with the O atoms on PEGAMS chains, whereas Cl^? ions only exhibit weak interaction with the polymer. Significantly a novel caged stable metal‐organic complex involving a Na⁺ ion coordinated by six O atoms from the copolymer was observed after the PNIPAM‐co‐PEGMA copolymer went through conformational transition to form a hydrophobic folded structure. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Controlled synthesis of poly(acetone oxime acrylate) as a new reactive polymer: Stimuli-responsive reactive copolymers

Acetone oxime acrylate has been synthesized as a new active ester monomer. Free radical polymerization yielded a reactive polymer soluble in various organic solvents, such as chloroform, dioxane, DMSO, acetone, methanol, dichloromethane, DMF, and ethanol. Controlled radical polymerization of acetone oxime acrylate was successfully conducted using the RAFT, NMP and Iniferter method. Partly polymer analogous reaction with N-isopropylamine resulted in the reactive copolymer poly(N-isopropylacrylamide-co-acetone oxime acrylate), which featured a lower critical solution temperature (LCST) of 61 °C in water. Further, the reactivity of the copolymer was exemplary proven by complete reaction with ammonia yielding poly(N-isopropylacrylamide-co-acrylamide), which does not possess a LCST.     

Poly[(N-isopropylacrylamide-co-acrylamide-co-(hydroxyethylmethacrylate))] thermoresponsive microspheres: An accurate method based on solute exclusion technique to determine the volume phase transition temperature

Poly[(N-isopropylacrylamide-co-acrylamide-co-(hydroxyethylmethacrylate))] [poly(NIPAAm-co-AAm-co-HEMA)] copolymer was synthesized as a new thermoresponsive material possessing a lower critical solution temperature (LCST) around 37 °C in phosphate buffer, pH 7.4, at a solution concentration of 1%, w/v. The influence of polymer concentration on LCST was determined by cloud point measurements and by microcalorimetric analysis. The copolymer was transformed in hydrogel microspheres by suspension reticulation of OH groups with glutaraldehyde. The volume phase transition temperature (VPTT) of microspheres was determined by a new approach, which involves measurement of the increase in concentration of a blue dextran (BD) solution at different temperatures in the presence of dry microspheres. The minimum BD concentration that gives reliable and reproducible results was determined to be 1 mg/ml. However, the higher is the concentration of BD in solution the smaller is the error. Contrary to solution of the linear polymer which displays a sharp phase transition temperature, the dependence of water regain of the hydrogel with temperature lasts from 4 °C to 50 °C.     

Phase transition of aqueous solutions of poly(N,N-diethylacrylamide-co-acrylic acid) by differential scanning calorimetric and spectrophotometric methods

 The phase transition of aqueous solutions of poly(N,N-diethylacrylamide-co-acrylic acid) (DEAAm–AA) is studied by differential scanning calorimetry (DSC) and UV–vis spectrophotometry. The copolymer aqueous solutions are shown to have well-defined lower critical solution temperatures (LCSTs). The LCST values obtained from the maximum of the first derivatives of the DSC and optical transition curves agree well. DSC can be used to measure the phase-transition temperature of more dilute polymer solutions. On increasing the AA composition in the copolymers, the LCST values of the copolymer increase, then decrease at higher AA composition. For the aqueous solution of the copolymers, the transition curve obtained by the spectrophotometric method is highly wavelength dependent. The LCST values are found to be concentration-dependent. The changes in the heat of the phase transition of the copolymer solutions measured from DSC are lower than that of the homopolymer PDEAAm solution. This is consistent with the suggestion that the polymer chains of the copolymers collapsed only partially at temperatures above the LCST. The added salt (sodium chloride) decreases the transition temperature of the polymer solution. Received: 14 November 2000 Accepted: 15 January 2001     

LCST behavior of copolymers of N-isopropylacrylamide and N-isopropylmethacrylamide in water

The lower critical solution temperature (LCST) behavior of copolymers of N-isopropylacrylamide (NiPA) and N-isopropylmethacrylamide (NiPMA) in water was studied as a function of the copolymer composition, using a combination of turbidity measurements and differential scanning calorimetry (DSC). The copolymers were prepared by free radical polymerization using N,N-dimethylformamide as a solvent and α,α′-azobis(isobutyronitrile) as an initiator. The copolymer composition was determined by elemental analysis. It was found that the temperature (T _c) at which the copolymer undergoes a phase transition, i.e., LCST, increases linearly with increasing the mole fraction (f _m) of NiPMA in the copolymer, within the T _c range from 32?°C (at f _m?=?0; NiPA homopolymer) to 42?°C (at f _m?=?1; NiPMA homopolymer). Also found from heating DSC thermograms were the linear dependencies of the enthalpy (ΔH) and entropy (ΔS) changes at T _c upon f _m. However, the ΔH (5.5?kJ/unit-mol) at f _m?=?1 was slightly smaller than that (5.7?kJ/unit-mol) of poly(N-n-propylacrylamide) but considerably smaller than that (7.8?kJ/unit-mol) of poly(N-n-propylmethacrylamide). The same trend was observed in the f _m dependence of ΔS. These results were discussed in terms of the structural effects of the NiPMA monomer unit on the heat-induced phase transition in water of poly(NiPA-co-NiPMA)s. It was suggested that a strong interaction of water with the amide group in the NiPMA would raise the transition temperature, but a local dehydration which occurs around the isopropyl side chain would not lead to large changes in the enthalpy and entropy at T _c.     

Preparation of biodegradable and thermoresponsive enzyme–polymer conjugates with controllable bioactivity via RAFT polymerization

The preparation of biodegradable and thermoresponsive enzyme–polymer bioconjugates with controllable enzymatic activity via reversible addition−fragmentation chain transfer (RAFT) polymerization and amidation conjugation reaction is presented. A new 2-mercaptothiazoline ester functionalized RAFT agent with intra-disulfide linkage was synthesized and used as chain transfer agent (CTA) to generate a biocompatible homopolymer, poly(ethyleneglycol) acrylate (polyPEG-A) and a thermoresponsive copolymer of poly(ethyleneglycol) acrylate with di(ethyleneglycol)ethyl ether acrylate [poly(PEG-A-co-DEG-A)]. These biodegradable and thermoresponsive polymers were then conjugated to the surface of glucose oxidase (GOx) under mild condition to afford the biodegradable and thermoresponsive enzyme–polymer conjugates. Cleavage of the polymer chains from the GOx surface obviously recovered the enzymatic activity. The thermoresponsive test of GOx-poly(PEG-A-co-DEG-A) revealed that the bioconjugate exhibited regular enzymatic activity fluctuation upon the temperature change below or above the lower critical solution temperature (LCST). The as-prepared enzyme–polymer conjugates were also characterized using ¹H NMR, UV–vis spectroscopy, polyacrylamide gel electrophoresis (PAGE) and biocatalytic activity tests. These smart enzyme–polymer conjugates would envision promising applications in biotechnology and biomedicine.     

Thermoresponsive hydrogel of poly(glycidyl methacrylate‐co‐N‐isopropylacrylamide) as a nanoreactor of gold nanoparticles

The synthesis of a thermoresponsive hydrogel of poly(glycidyl methacrylate‐co‐N‐isopropylacrylamide) (PGMA‐co‐PNIPAM) and its application as a nanoreactor of gold nanoparticles are studied. The thermoresponsive copolymer of PGMA‐co‐PNIPAM is first synthesized by the copolymerization of glycidyl methacrylate and N‐isopropylacrylamide using 2,2′‐azobis(isobutyronitrile) as an initiator in tetrahydrofuran at 70 °C and then crosslinked with diethylenetriamine to form a thermoresponsive hydrogel. The lower critical solution temperature (LCST) of the thermoresponsive hydrogel is about 50 °C. The hydrogel exists as 280‐nm spheres below the LCST. The diameter of the spherical hydrogel gradually decreases to a minimum constant of 113 nm when the temperature increases to 75 °C. The hydrogel can act as a nanoreactor of gold nanoparticles because of the coordination of nitrogen atoms of the crosslinker with gold ions, on which a hydrogel/gold nanocomposite is synthesized. The LCST of the resultant hydrogel/gold nanocomposite is similar to that of the hydrogel. The size of the resultant gold nanoparticles is about 15 nm. The hydrogel/gold nanocomposite can act as a smart and recyclable catalyst. At a temperature below the LCST, the thermoresponsive nanocomposite is a homogeneous and efficient catalyst, whereas at a temperature above the LCST, it becomes a heterogeneous one, and its catalytic activity greatly decreases. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2812–2819, 2007     

Micellization and gelation of the double thermoresponsive ABC-type triblock copolymer synthesized by RAFT

A double thermoresponsive ABC-type triblock copolymer(poly(ethyleneglycol)-block-poly(2-(2-methoxyethoxy) ethyl methacrylate)-block-poly(2-(2-methoxy ethoxy) ethyl methacrylate-co-oligo(ethylene glycol) methyl ether methacrylate, PEG-b-PMEO_2MA-b-P(MEO_2MA-co-OEGMA)) was designed and synthesized by reversible additionfragmentation chain transfer polymerization(RAFT). The ABC-type triblock copolymer endowed a thermal-induced twostep phase transition at 29 and 39 °C, corresponding to the thermosensitive properties of PMEO_2 MA and P(MEO_2MA-coOEGMA) segments, respectively. The two-step self-assembly of copolymer solutions was studied by UV transmittance measurement, dynamic light scattering(DLS), transmission electron microscopy(TEM) and so on. The triblock copolymers showed the distinct thermosensitive behavior with respect to transition temperatures, aggregate type and size, which was correlated to the degree of polymerization of thermosensitive blocks and the molar fraction of OEGMA in the P(MEO_2MAco-OEGMA) segments. In addition, micelles could further aggregate to form the hydrogel by the self-associate of PEG chains under the abduction of the concentration and temperature. The transition from sol to gel was investigated by a test tube inverting method and dynamic rheological measurement.     

Controlled aggregation behavior of thermoresponsive polymeric micelles by introducing hydrophilic segments as corona components

Poly[N‐isopropylacrylamide‐co‐N‐(3‐methoxypropyl)acrylamide]‐b‐poly(D,L‐lactide) (P(IPAAm‐co‐MPAAm)‐b‐PLA) as a thermoresponsive block copolymer and PMPAAm‐b‐PLA as a nonthermoresponsive block copolymer were co‐assembled into thermoresponsive polymeric micelles in water. In addition, PMPAAm‐b‐P(IPAAm‐co‐MPAAm)‐b‐PLA triblock copolymer was assembled to form thermoresponsive micelles with a hydrophilic layer on the outermost surface of the thermoresponsive corona. Using both micelles, we investigated the effects of introducing hydrophilic polymer segments on micellar aggregation behavior at temperatures above the lower critical solution temperature (LCST) of the thermoresponsive micelles. Despite the external hydrophilic PMPAAm layer on PMPAAm‐b‐P(IPAAm‐co‐MPAAm)‐b‐PLA micelles, aggregation following dehydration of the thermoresponsive segments was not significantly suppressed at temperatures above the LCST due to the instability of the core‐corona state. In contrast, intermicellar aggregation was successfully controlled by blending P(IPAAm‐co‐MPAAm) and PMPAAm in the thermoresponsive corona region, even above the LCST. In particular, PMPAAm chains longer than the P(IPAAm‐co‐MPAAm) chains could regulate the hydrodynamic diameter of micellar aggregates at temperatures above the LCST. The micelles showed enhanced drug release rates in response to temperature changes above the LCST without precipitating from solution. These results indicated that a side‐by‐side structure of hydrophilic/thermoresponsive chains in the corona region could effectively control the micellar aggregation state after a thermal phase transition. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1695–1704     

Thermo‐ and pH‐responsive gradient and block copolymers based on 2‐(2‐methoxyethoxy)ethyl methacrylate synthesized via atom transfer radical polymerization and the formation of thermoresponsive surfaces

A series of gradient and block copolymers, based on 2‐(2‐methoxyethoxy)ethyl methacrylate (MEO₂MA) and tert‐butyl acrylate (^tBA), were synthesized by atom transfer radical polymerization (ATRP) in a first step. The MEO₂MA monomer leads to the production of thermosensitive polymers, exhibiting lower critical solution temperature (LCST) at around room temperature, which could be adjusted by changing the proportion of ^tBA in the copolymer. In a second step, the tert‐butyl groups of ^tBA were hydrolyzed with trifluoroacetic acid to form the corresponding block and gradient copolymers of MEO₂MA and acrylic acid (AA), which exhibited both temperature and pH‐responsive behavior. These copolymers showed LCST values strongly dependent on the pH. At acid pH, a slightly decrease of LCST with an increase of AA in the copolymer was observed. However, at neutral or basic conditions, ionization of acid groups increases the hydrophilic balance considerably raising the LCST values, which even become not observable over the temperature range under study. In the last step, these carboxylic functionalized copolymers were covalently bound to biocompatible and biodegradable films of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) [P(HB‐co‐HHx)] obtained by casting and, previously treated with ethylenediamine (ED) to render their surfaces with amino groups. Thereby, thermosensitive surfaces of modified P(HB‐co‐HHx) could be obtained. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation and characterization of film-forming raspberry-like polymer/silica nanocomposites via soap-free emulsion polymerization and the sol–gel process

Herein, we report on the synthesis of film-forming poly(styrene-co-butyl acrylate-co-acrylic acid)/SiO₂ [P(St-BA-AA)/SiO₂] nanocomposites by in situ formation of SiO₂ nanoparticles from TEOS via sol–gel process in the presence of poly(acrylic acid) (PAA)-functionalized poly(styrene-co-butyl acrylate) [P(St-BA)] particles fabricated by soap-free emulsion polymerization. The formed silica particles could be absorbed by polyacrylate chains on the surface of PAA-functionalized P(St-BA) particles; thus, raspberry-like polymer/silica nanocomposites would be obtained. Transmission electron microscopy, Fourier transform infrared spectroscopy, attenuated total reflectance infrared spectrum, ultraviolet–visible transmittance spectra, and thermogravimetric analysis were used to characterize the resulting composites. The results showed that the hybrid polymer/silica had a raspberry-like structure with silica nanoparticles anchored on the surface of polymer microspheres. The thermal, fire retardant, and mechanical properties and water resistance of the film were improved by incorporating silica nanoparticles, while the optical transmittance was seldom affected due to nanosized silica particles uniformly dispersed in the film.

Temperature-responsive photoluminescence of quinoline-labeled poly(N-isopropylacrylamide) in aqueous solution

The pH- and temperature-responsive optical properties of a quinoline-labeled poly(N-isopropylacrylamide) copolymer are explored in aqueous solution and compared to the respective behavior of a similar quinoline-labeled poly(N,N-dimethylacrylamide) copolymer. These copolymers, P(NIPAM-co-SDPQ) and P(DMAM-co-SDPQ), were prepared through free radical copolymerization of 2,4-diphenyl-6-(4-vinylphenyl)quinoline (SDPQ) with the thermosensitive N-isopropylacrylamide (NIPAM) and the hydrophilic N,N-dimethylacrylamide (DMAM), respectively. Both copolymers exhibit the well-known pH-controlled optical response of quinoline unit in aqueous solution and the emitted color changes from blue to green upon decreasing pH. Nevertheless, a ～20 nm emission shift is observed upon heating the aqueous P(NIPAM-co-SDPQ) solution, regardless of pH, due to the formation of hydrophobic microdomains (Nile Red probing), as a consequence of the Lower Critical Solution Temperature (LCST) behavior of this copolymer in water. Interestingly, this LCST behavior also imposes the partial deprotonation of the otherwise protonated SDPQ unit at pH = 2 and the emission of the basic form appears upon increasing temperature, suggesting that the acid/base equilibrium of the quinoline unit is significantly temperature-controlled, when introduced in the thermosensitive poly(N-isopropylacrylamide) chain.     

Adsorption of poly(N-isopropylacrylamide-co-4-vinylpyridine) onto core-shell poly(styrene-co-methylacrylic acid) microspheres

Adsorption of the thermoresponsive copolymer of poly(N-isopropylacrylamide-co-4-vinylpyridine) (PNIPAM-co-P4VP) onto the core-shell microspheres of poly(styrene-co-methylacrylic acid) (PS-co-PMAA) is studied. The core-shell PS-co-PMAA microspheres are synthesized by one-stage soap-free polymerization in water. The copolymer of PNIPAM-co-P4VP is synthesized by free radical polymerization of N-isopropylacrylamide and 4-vinylpyridine in the mixture of DMF and water using K₂S₂O₈ as initiator. Adsorption of PNIPAM-co-P4VP onto the core-shell PS-co-PMAA microspheres results in formation of the composite microspheres of PS/PMAA-P4VP/PNIPAM. The driven force to adsorb the copolymer of P4VP-co-PNIPAM onto the core-shell PS-co-PMAA microspheres is ascribed to hydrogen-bonding and electrostatic affinity between the P4VP and PMAA segments. The resultant composite microspheres of PS/PMAA-P4VP/PNIPAM with surface chains of PNIPAM are thermoresponsive in water and show a cloud-point temperature at about 33 °C.     

PNIPAM chain collapse depends on the molecular weight and grafting density

This study demonstrates that the thermally induced collapse of end-grafted poly(N-isopropylacrylamide) (PNIPAM) above the lower critical solution temperature (LCST) of 32 degrees C depends on the chain grafting density and molecular weight. The polymer was grafted from the surface of a self-assembled monolayer containing the initiator (BrC(CH3)2COO(CH2)11S)2, using surface-initiated atom transfer radical polymerization. Varying the reaction time and monomer concentration controlled the molecular weight, and diluting the initiator in the monolayer altered the grafting density. Surface force measurements of the polymer films showed that the chain collapse above the LCST decreases with decreasing grafting density and molecular weight. At T > LCST, the advancing water contact angle increases sharply on PNIPAM films of high molecular weight and grafting density, but the change is less pronounced with films of low-molecular-weight chains at lower densities. Below the LCST, the force-distance profiles exhibit nonideal polymer behavior and suggest that the brush architecture comprises dilute outer chains and much denser chains adjacent to the surface.     

Nonlinear depression of the lower critical solution temperatures in aqueous solutions of thermo-sensitive random copolymers

We develop a theoretical model of cooperative hydration to clarify the molecular origin of the observed nonlinear depression of the lower critical solution temperature (LCST) in the aqueous solutions of thermosensitive random copolymers and find the monomer composition at which LCST shows a minimum. Phase diagrams of poly(N-isopropylacrylamide-co-N,N-diethylacrylamide) copolymer solutions are theoretically derived on the basis of the theory of cooperative hydration by introducing the microscopic structure parameter η which characterizes the distribution of the monomer sequences along the chains. We compared them with the experimental data of LCST of random copolymers with various monomer compositions and also of the diblock copolymers with equimolar monomer composition. The transition temperature shifts to lower than those of homopolymer counterparts when the monomer sequence of the chains has an alternative tendency. On the contrary, for the blocky polymers such as diblock copolymers, the transition temperature remains almost the same as those of the homopolymers. Thus, the nonlinear effect in phase separation appears when the average block length of the copolymers is shorter than the average sequence length of the cooperative hydration. The degree of hydration is calculated as a function of the temperature and polymer concentration for varied distribution of the copolymer compositions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1112–1123     

Synthesis and characterization of pH‐sensitive and thermosensitive double hydrophilic graft copolymers

A series of poly(N‐isopropylacrylamide)‐co‐poly(N^ε‐benzyloxycarbonyl‐L ‐lysine) graft copolymers (PNIPAm‐co‐PZLLys) with different side chains (degree of polymerization, DP = 5～40) and unit ratios (from 30 to 70 mol %) were prepared via free radical polymerization, followed by cleaving benzyloxycarbonyl groups (Z groups) to obtain the double hydrophilic graft copolymer, poly(N‐isopropylacrylamide)‐co‐poly(L ‐lysine) (PNIPAm‐co‐PLLys). The pH‐ and temperature‐response properties of the graft copolymers in aqueous solution were studied. The experimental results indicate L15‐N30 and L15N‐70, that is, the PNIPAm‐co‐PLLys having the poly(L ‐lysine) of DP = 15 as side chains as well as 30 and 70 mol %, respectively, of PNIPAm as backbone, have coil‐to‐helix transitions from pH 6 to pH 12 at room temperature and form uniform nanoscale micelle‐like dispersions in aqueous solution at pH 12. The graft copolymers also could form uniform and nanoscale micelle‐like structures at 50 °C in pH 6 buffer solution due to slightly polymer aggregation. With temperature and pH increased, both the deprotonated PLLys side chains and PNIPAm backbone become hydrophobic, leading to polymer precipitation. These results illustrate that a double tunable hydrophilic graft copolymer had been successfully synthesized via a simple radical polymerization, and could form micelles without serious polymer aggregation at a lower pH and a higher temperature. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effect of synthesis method and buffer composition on the LCST of a smart copolymer of N‐isopropylacrylamide and acrylic acid

Responsive polymers have been the focus of many studies during the past decade because of their ability to change according to environmental stimuli. In this paper, we report on the development of a method to synthesize a pH/temperature‐sensitive linear copolymer, poly(N‐isopropylacrylamide‐ co‐acrylic acid)(poly(NIPAAm‐co‐AAc)), with a molecular weight of about 10⁶–10⁵ Da in water using azobisisobutyronitrile (AIBN) as the initiator. The effects of the following on the lower critical solution temperature (LCST) of the copolymer and homopolymer of NIPAAm were investigated: the type of buffer salts and pH changes of test solutions, molecular weight and concentration of homopolymer/copolymer solutions, and AAc monomer molar feed ratio (mol%). The effects of different synthesis methods on the molecular weight and on the AAc content were also evaluated. The mechanism of action in environments with different pH values is discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Designing catechol‐end functionalized poly(DMAm‐co‐NIPAM) by RAFT with tunable LCSTs

Providing catechol‐end functionality to controlled structure lower critical solution temperature (LCST) copolymers is attractive, given the versatility of catechol chemistry for tethering to nanostructures. Controlled polymer chain lengths with catechol RAFT end groups are of interest to provide tunable LCST behavior to nanoparticles, although these polymerizations are relatively unexplored. Herein, the reactivity ratios for the RAFT copolymerization of N,N‐dimethylacrylamide (DMAm) and N‐isopropylacrylamide (NIPAM) pairs based on catechol‐end RAFT agents using an in situ NMR technique were first determined. Several catechol‐end poly(DMAm‐co‐NIPAM) samples were then prepared using the RAFT agent to provide copolymer. The reactivity ratios for the DMAm‐NIPAM pair were r_DMAm = 1.28–1.31 and r_NIPAM = 0.48–0.51. All the poly(DMAm‐co‐NIPAM) samples were found to have M_n values ≤ 26 kDa and Ð < 1.08 with LCST values ranging from 31 to 92°C, while maintaining a short range of glass transition temperature (T_g = 118–137°C). The difference in LCST values for the catechol functionalized poly(DMAm‐co‐NIPAM) based on 0.5 wt% aqueous buffered solutions at pH 5.5 and 8.5 was found to be <3.0°C. These conditions are suitable for subsequent catechol‐induced coordination and nucleophilic addition chemistry for covalent and noncovalent linkages during subsequent post‐modification. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 4062–4070     

Synthesis of amphiphilic copolymer brushes: Poly(ethylene oxide)‐graft‐polystyrene

A well‐defined amphiphilic copolymer brush with poly(ethylene oxide) as the main chain and polystyrene as the side chain was successfully prepared by a combination of anionic polymerization and atom transfer radical polymerization (ATRP). The glycidol was first protected by ethyl vinyl ether to form 2,3‐epoxypropyl‐1‐ethoxyethyl ether and then copolymerized with ethylene oxide by the initiation of a mixture of diphenylmethylpotassium and triethylene glycol to give the well‐defined polymer poly(ethylene oxide‐co‐2,3‐epoxypropyl‐1‐ethoxyethyl ether); the latter was hydrolyzed under acidic conditions, and then the recovered copolymer of ethylene oxide and glycidol {poly(ethylene oxide‐co‐glycidol) [poly(EO‐co‐Gly)]} with multiple pending hydroxymethyl groups was esterified with 2‐bromoisobutyryl bromide to produce the macro‐ATRP initiator [poly(EO‐co‐Gly)_(ATRP). The latter was used to initiate the polymerization of styrene to form the amphiphilic copolymer brushes. The object products and intermediates were characterized with ¹H NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, Fourier transform infrared, and size exclusion chromatography in detail. In all cases, the molecular weight distribution of the copolymer brushes was rather narrow (weight‐average molecular weight/number‐average molecular weight < 1.2), and the linear dependence of ln[M₀]/[M] (where [M₀] is the initial monomer concentration and [M] is the monomer concentration at a certain time) on time demonstrated that the styrene polymerization was well controlled. This method has universal significance for the preparation of copolymer brushes with hydrophilic poly(ethylene oxide) as the main chain. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4361–4371, 2006     

Anhydrous proton conducting membranes based on crosslinked graft copolymer electrolytes

A comb-like copolymer consisting of a poly(vinylidene fluoride-co-chlorotrifluoroethylene) backbone and poly(hydroxy ethyl acrylate) side chains, i.e. P(VDF-co-CTFE)-g-PHEA, was synthesized through atom transfer radical polymerization (ATRP) using CTFE units as a macroinitiator. Successful synthesis and a microphase-separated structure of the copolymer were confirmed by proton nuclear magnetic resonance (¹H NMR), FT-IR spectroscopy, and transmission electron microscopy (TEM). This comb-like polymer was crosslinked with 4,5-imidazole dicarboxylic acid (IDA) via the esterification of the –OH groups of PHEA and the –COOH groups of IDA. Upon doping with phosphoric acid (H₃PO₄) to form imidazole–H₃PO₄ complexes, the proton conductivity of the membranes continuously increased with increasing H₃PO₄ content. A maximum proton conductivity of 0.015 S/cm was achieved at 120 °C under anhydrous conditions. In addition, these P(VDF-co-CTFE)-g-PHEA/IDA/H₃PO₄ membranes exhibited good mechanical properties (765 MPa of Young's modulus), and high thermal stability up to 250 °C, as determined by a universal testing machine (UTM) and thermal gravimetric analysis (TGA), respectively.