Various Au nanoparticle organizations fabricated through SiO2 monomer induced self-assembly

A novel method has been developed to fabricate the assembly of Au colloidal nanoparticles (NPs) using SiO(2) monomers. The key strategy was the use of a controlled sol-gel procedure including hydrolysis, deposition, and condensation of tetraethyl orthosilicate (TEOS). Namely, the assembly of Au NPs was created by the anisotropic deposition of SiO(2) monomers and subsequent permanent fixing by the growth of a SiO(2) shell. Various assemblies of Au NPs such as dimer, trimer, and pearl-chain morphology were fabricated by systematically changing the concentration and injection speed of TEOS. A longitudinal plasmon resonance band was observed as a result of the assembly of Au NPs and can be tuned from visible to near-infrared by altering the length of pearl-chain morphology. In addition, single Au NP was homogeneously coated with a SiO(2) shell by means of controlling the deposition rate of SiO(2) monomers during a Sto?ber synthesis without the use of a silane coupling agent or bulk polymer as the surface primer to render the Au surface vitreophilic. The Au NPs (mean size 11.4 nm in diameter) were thus encapsulated into SiO(2) beads with a wide range of sizes (from 20 to 50 nm in diameter). These pure SiO(2)-coated Au beads with tunable shell thickness should be crucial for biosensors, particularly as Raman-tag particles.     

Rapid one-step synthesis, characterization and functionalization of silica coated gold nanoparticles

This paper describes a rapid, simple and one-step method for preparing silica coated gold (Au@SiO₂) nanoparticles with fine tunable silica shell thickness and surface functionalization of the prepared particles with different groups. Monodispersed Au nanoparticles with a mean particle size of 16 nm were prepared by citrate reduction method. Silica coating was carried out by mixing the as prepared Au solution, tetraethoxysilane (TEOS) and ammonia followed by microwave (MW) irradiation. Although there are several ways of coating Au nanoparticles with silica in the literature, each of these needs pre-coating step as well as long reaction duration. The present method is especially useful for giving the opportunity to cover the colloidal Au particles with uniform silica shell within very short time and forgoes the use of a silane coupling agent or pre-coating step before silica coating. Au@SiO₂ nanoparticles with wide range of silica shell thickness (5-105 nm) were prepared within 5 min of MW irradiation by changing the concentration of TEOS only. The size uniformity and monodispersity were found to be better compared to the particles prepared by conventional methods, which were confirmed by dynamic light scattering and transmission electron microscopic techniques. The prepared Au@SiO₂ nanoparticles were further functionalized with amino, carboxylate, alkyl groups to facilitate the rapid translation of the nanoparticles to a wide range of end applications. The functional groups were identified by XPS, and zeta potential measurements.     

Facile synthesis of anisotropic Au@SiO2 core-shell nanostructures

Anisotropic Au@SiO(2) core-shell nanostructures have been fabricated from CTABr-stabilized Au nanoparticles with a facile synthesis involving a single growth solution. This procedure circumvents tedious surface modification steps and allows for the SiO(2) shell thickness to be tuned from 5 to 20 nm by modulating the nanoparticle number density and concentration of silica precursor.     

Synthesis of spherical submicron-sized magnetite/silica nanocomposite particles

This paper describes a method for fabricating spherical submicron-sized silica particles that contained magnetite nanoparticles (magnetite/silica composite particles). The magnetite nanoparticles with a size of ca. 10 nm were prepared according to the Massart method, and were surface-modified with carboxyethylsilanetriol. The fabrication of magnetite/silica composite particles was performed in water/ethanol solution of tetraethoxyorthosilicate with ammonia catalyst in the presence of the surface-modified magnetite nanoparticles. The magnetite/silica composite particles with a size of ca. 100 nm were successfully prepared at 0.05 M TEOS, 15 M water, and 0.8 M ammonia with injection of the magnetite nanoparticle colloid at 2 min after the initiation of hydrolysis reaction of TEOS. Magnetite concentration in the composite particles could be raised to 17.3 wt.% by adjustment of the injected amount of the magnetite colloid, which brought about the saturation magnetization of 7.5 emu/g for the magnetite/silica composite particles.     

Characterization and catalytic-hydrogenation behavior of SiO2-embedded nanoscopic Pd, Au, and Pd-Au alloy colloids

Colloids embedded in a silica sol-gel matrix were prepared by using fully alloyed Pd-Au colloids, and pure Pd and Au colloids stabilized with tetraalkylammonium bromide following a modified sol-gel procedure with tetrahydrofuran (THF) as the solvent. Tetraethoxysilicate (TEOS) was used as the precursor for the silica support. The molar composition of the sol was TEOS/THF/H2O/HCl = 1:3.5:4:0.05 for the bimetallic Pd-Au and TEOS/THF/H2O/HCl = 1:4.5:4:0.02 for Pd and Au monometallic systems. After refluxing, the colloid was added as a 4.5 wt % solution in THF for Pd-Au, 10.2 wt % solution in THF for Pd and 8.4 wt % solution in THF for Au at room temperature. The gelation was carried out with vigorous stirring (4 days) under an Ar atmosphere. Following these procedures, bimetallic Pd-Au-SiO2 catalysts with 0.6 and 1 wt % metal, and monometallic Pd- and Au-SiO2 catalysts with 1 wt % metal were prepared. These materials were further treated following four different routes: 1) by simple drying, 2) in which the dried catalysts were calcined in air at 723 K and then reduced at the same temperature, 3) in which they were directly reduced in hydrogen at 723 K, and 4) in which the surfactant was extracted using an ethanol-heptane azeotropic mixture. The catalysts were characterized by nitrogen adsorption-desorption isotherms at 77 K, H2 chemisorption measurements, solid-state 1H, 13C, 29Si-CP/MAS-NMR spectroscopy, powder X-ray diffraction (XRD), small angle X-ray scattering (SAXS), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and 197Au M?ssbauer spectroscopy. The physical characterization by a combination of these techniques has shown that the size and the structural characteristics of the Pd-Au colloid precursor are preserved when embedded in an SiO2 matrix. Catalytic tests were carried out in selective hydrogenation of 3-hexyn-1-ol, cinnamaldehyde, and styrene. These data showed evidence that alloying Pd with Au in bimetallic colloids leads to enhanced activity and most importantly to improved selectivity. Also, the combination of the two metals resulted in catalysts that were very stable against poisoning, as was evidenced for the hydrogenation of styrene in the presence of thiophene.     

Silica coating of silver nanoparticles using a modified Stober method

Silver nanoparticles prepared through a borohydride-reduction method were directly coated with silica by means of a seeded polymerization technique based on the Stober method. Various amine catalysts were used for initialization of a sol-gel reaction of TEOS with no need for a prior surface modification. Use of dimethylamine (DMA) as a catalyst was found to be necessary to obtain a proper coating. The silica shell thickness was varied from 28 to 76 nm for TEOS concentrations of 1-15 mM at 11.1 M water and 0.8 M DMA. The optical spectra of the core-shell silver-silica composite particles show a qualitative agreement with predictions by Mie theory.     

碳酸镉@二氧化硅菱形体核壳结构以及二氧化硅菱形体空心结构微粒的制备

利用Stöber种子生长法, 第一次在尺寸为2 μm左右的碳酸镉菱形微粒表面直接包覆二氧化硅层, 得到碳酸镉@二氧化硅核壳结构的胶体粒子. 作为核壳结构的壳层部分, 二氧化硅层的厚度可以通过加入体系中的正硅酸乙酯的量来控制. 作为核层的碳酸镉胶体部分可以被盐酸刻蚀掉, 进而得到具有菱形体空心结构的二氧化硅微粒.     

General one-pot strategy to prepare multifunctional nanocomposites with hydrophilic colloidal nanoparticles core/mesoporous silica shell structure

A general and facile strategy was developed to coat hydrophilic inorganic nanoparticles directly with mesoporous silica nanoparticles (MSNs). The cationic surfactant of cetyltrimethylammonium bromide (CTAB) was adsorbed to various negatively charged CdTe quantum dots, Fe(3)O(4) nanocrystals or Au nanoparticles, introducing the bilayer of CTAB overcoating with positive charge. The subsequent sol-gel reaction of TEOS with the basic catalyst resulted in uniform nanocomposites. The concentration of CTAB and NH(4)OH in the recipe strongly influenced the number of inorganic nanoparticles in the nanocomposites and the homogeneity of MSNs shell. One dimensional Au nanorods and larger size of solid SiO(2) nanoparticles were also able to coat with MSNs using a similar synthetic procedure. The proposed method was greatly simplified without the help of any mediators or silane coupling agents and excellent mesostructural performance was readily achieved. Compared to the methods known from the literatures for the coating of hydrophobic nanoparticles, this efficient way is especially useful for trapping different hydrophilic nanoparticles with arbitrary sizes and shapes into MSNs. These highly versatile multifunctional nanocomposites, together with the pH-responsible drug release behaviors, non-toxicity to normal cells and ease of uptake into cancer cells, are expected to be utilized as drug delivery system for simultaneous imaging and therapeutic applications.     

铁氧化物/金磁性核壳纳米粒子的制备及其富集与SERS研究

本文用种子生长法制备铁氧化物/金磁性核壳纳米粒子, 并利用SERS对其磁场靶向性进行了检测.     

Three-layer composite magnetic nanoparticle probes for DNA

A method for synthesizing composite nanoparticles with a gold shell, an Fe3O4 inner shell, and a silica core has been developed. The approach utilizes positively charged amino-modified SiO2 particles as templates for the assembly of negatively charged 15 nm superparamagnetic water-soluble Fe3O4 nanoparticles. The SiO2-Fe3O4 particles electrostatically attract 1-3 nm Au nanoparticle seeds that act in a subsequent step as nucleation sites for the formation of a continuous gold shell around the SiO2-Fe3O4 particles upon HAuCl4 reduction. The three-layer magnetic nanoparticles, when functionalized with oligonucleotides, exhibit the surface chemistry, optical properties, and cooperative DNA binding properties of gold nanoparticle probes, but the magnetic properties of the Fe3O4 inner shell.     

X-ray imaging of newly-developed gadolinium compound/silica core–shell particles

A preparation method for gadolinium compound (Gd) nanoparticles coated with silica (Gd/SiO₂) is proposed. Gd nanoparticles were prepared with a homogeneous precipitation method at 80 °C using 1.0 × 10⁻³ M Gd(NO₃)₃ and 0.5 M urea in the presence of 1.0 g/L stabilizer. Among stabilizers examined. Sodium n-dodecyl sulfate (SDS) was suitable as the stabilizer for preparing small Gd nanoparticles, and consequently Gd nanoparticles with a size of 46.2 ± 12.4 nm were prepared using the SDS. Silica-coating of the Gd nanoparticles was performed by a St?ber method at room temperature using 0.013 M TEOS and 2.0 × 10⁻³ M NaOH in water/1-propanol solution in the presence of 1.0 × 10⁻³ M Gd nanoparticles, which resulted in production of Gd/SiO₂ particles with an average size of 64.2 ± 14.4 nm. The Gd/SiO₂ particles were surface-modified with 3-aminopropyltrimethoxysilane and succinic anhydride. It was confirmed by measurement of electrophretic light scattering that amino group or carboxyl group was introduced onto the Gd/SiO₂ particles. The gadolinium concentration of 1.0 × 10⁻³ M in the as-prepared colloid solution was increased up to a gadolinium concentration of 0.4 M by centrifugation. The core–shell structure of Gd/SiO₂ particles was undamaged, and the colloid solution was still colloidally stable, even after the concentrating process. The concentrated Gd/SiO₂ colloid solution showed an X-ray image with contrast as high as a commercial Gd complex contrast agent. Internal organs in a mouse could be imaged injecting the concentrated colloid solution into it.     

Direct coating of quantum dots with silica shell

This paper describes a method for direct coating of fluorescent semiconductor nanoparticles with silica shell. The fluorescent semiconductor nanoparticles used were CdSe _x Te_1–x nanoparticles coated with ZnS and succeedingly surface-modified with carboxyl groups, or quantum dots (Q-dots). The Q-dots were silica-coated by performing sol–gel reaction of tetraethyl orthosilicate (TEOS) using NaOH as a catalyst in the presence of the Q-dots. Quasi-perfect Q-dots/silica core-shell particles were formed at 5.0 M H₂O and 4.0 × 10⁻⁴ M NaOH. Under these concentrations of H₂O and NaOH, the particle size of Q-dots/silica particles could be varied from 20.1 to 38.1 nm as the TEOS concentration increased from 2.5 × 10⁻⁴ to 50 × 10⁻⁴ M. The Q-dots/silica particles showed fluorescence as well as the uncoated Q-dots.     

Au@SiO_2中空微球的制备及催化性能

以天然高分子阿拉伯树胶(AG)为还原剂和稳定剂制备了金纳米粒子;将含有金纳米粒子(Au NPs)、阿拉伯树胶和氨水的溶液滴加到乙醇中形成AG-Au NPs复合胶团;利用正硅酸乙酯水解,在AG-Au NPs表面包覆二氧化硅壳层;通过简单水洗的方法得到了金纳米粒子@二氧化硅(Au@SiO_2)中空微球.采用透射电子显微镜(TEM)、X射线衍射仪(XRD)和氮气吸附实验等对Au@SiO_2中空微球进行表征.通过设计对比实验,证实阿拉伯树胶在中空结构形成过程中起到模板剂的作用.催化性能测试结果表明,所制备的Au@SiO_2中空微球在硼氢化钠还原亚甲基蓝的反应中表现出良好的催化活性和重复使用性.     

合成条件对径向有序介孔二氧化硅中空亚微米球的形貌和结构的影响

本文以硬模板与软模板结合的双模板方法(十六烷基三甲基溴化铵(CTAB)为介孔模板,聚苯乙烯(PS)球为中空模板),通过自组装制备出有良好分离性和单分散性且具有径向介孔的二氧化硅中空亚微米球.研究表明CTAB、TEOS的用量,催化剂的种类对二氧化硅中空亚微米球的形貌、壁厚、产品纯度等都有很大的影响.在保持其它实验条件不变的情况下,通过分别单独调节CTAB和TEOS的用量或同时调节CTAB和TEOS的用量,得出最佳原料配比是:TEOS/CTAB/NH3/乙醇/水的摩尔比是1:0.27:9.8:304:2955,TEOS/聚苯乙烯球的质量比是4/1.催化剂的种类对中空亚微米球的形貌也有较大影响,当NaOH(浓度为1 mol/L)的用量为0.05—0.10 mL时,生成由小粒子聚集而成的亚微米球;随着NaOH用量增大到0.10—0.20 mL,小粒子逐渐粘合在一起,亚微米球表面逐渐变光滑;进一步增大NaOH用量为0.20—0.30 mL则导致杂质小粒子的出现.在实验结果和文献报道的基础上,讨论并提出了径向有序介孔二氧化硅中空亚微米球的形成机理.     

Hybrid gold/silica/nanocrystal-quantum-dot superstructures: synthesis and analysis of semiconductor-metal interactions

We report on the synthesis and spectroscopic characterization of well-defined hybrid structures that consist of a gold core overcoated with a silica shell, followed by a dense monolayer of CdSe nanocrystal quantum dots (QDs). The dielectric silica spacer of a controlled thickness provides a simple means for tuning interactions between the QD emitters and the metal core. To illustrate this tunability, we demonstrate switching between QD emission quenching and enhancement by varying the silica shell thickness. Synthetic procedures developed here employ a final step of self-assembly of QDs onto the silica shell performed via simple titration of the QD solution with prefabricated core/shell Au/SiO2 particles. This approach allows us to perform an accurate quantitative analysis of the effect of the metal on the QD emission intensity. One important result of this analysis is that nonuniformity of nonradiative rates across the QD ensemble has a significant effect on both the magnitude and the shell-thickness dependence of the emission enhancement/quenching factors.     

In-vivo fluorescence imaging technique using colloid solution of multiple quantum dots/silica/poly(ethylene glycol) nanoparticles

This paper describes a method for producing silica particles containing multiple quantum dots (QD/SiO₂), a method for surface-modifying the particles with poly(ethylene glycol) (QD/SiO₂/PEG), and an in vivo fluorescence imaging technique using colloid solution of the QD/SiO₂/PEG particles. The QDs used were ZnS-coated CdSe_xTe_1?x nanoparticles surface-modified with carboxyl groups, and had an average size of 10.3 ± 2.1 nm. The QD/SiO₂ particles were fabricated by performing sol–gel reaction of tetraethyl orthosilicate using NaOH as a catalyst in the presence of the QDs. The produced particles formed core–shell structure composed of multiple QDs and silica shell, and had an average size of 50.2 ± 17.9 nm. Surface-modification of the QD/SiO₂ particles with PEG, or PEGylation of the particle surface, was performed by using methoxy polyethylene glycol silane. Fluorescence of QD colloid solution was not quenched even through the silica-coating and the PEGylation. Tissues of a mouse could be imaged by injecting the concentrated colloid solution into it and measuring fluorescence intensity emitted from the tissues.     

Fast and facile synthesis of silica coated silver nanoparticles by microwave irradiation

A novel, fast and facile microwave technique has been developed for preparing monodispersed silica coated silver (Ag@SiO(2)) nanoparticles. Without using any other surface coupling agents such as 3-aminopropyltrimethoxysilane (APS) or polymer such as polyvinyl pyrrolidone (PVP), Ag@SiO(2) nanoparticles could be easily prepared by microwave irradiation of a mixture of colloidal silver nanoparticles, tetraethoxysilane (TEOS) and catalyst for only 2 min. The thickness of silica shell could be conveniently controlled in the range of few nanometers (nm) to 80 nm by changing the concentration of TEOS. Transmission electron microscopy (TEM) and UV-visible spectroscopy were employed to characterize the morphology and optical properties of the prepared Ag@SiO(2) nanoparticles, respectively. The prepared Ag@SiO(2) nanoparticles exhibited a change in surface plasmon absorption depending on the silica thickness. Compared to the conventional techniques based on St?ber method, which need 4-24 h for silica coating of Ag nanoparticles, this new technique is capable of synthesizing monodispersed, uniform and single core containing Ag@SiO(2) nanoparticles within very short reaction time. In addition, straightforward surface functionalization of the prepared Ag@SiO(2) nanoparticles with desired functional groups was performed to make the particles useful for many applications. The components of surface functionalized nanoparticles were examined by Fourier transform infrared (FT-IR) spectroscopy, zeta potential measurements and X-ray photoelectron spectroscopy (XPS).     

Synthesis and electromagnetic properties of polyaniline-coated silica/maghemite nanoparticles

Polyaniline coated silica/maghemite nanoparticles (PANI/SiO₂/γ-Fe₂O₃ composites) were synthesized by the combination of a sol-gel process and an in-situ polymerization method, in which ferrous and ferric salts as well as tetraethyl orthosilica (TEOS) acted as the precursor for γ-Fe₂O₃ and silica, respectively. As a result, the SiO₂/γ-Fe₂O₃ particle showed a core-shell structure, with γ-Fe₂O₃ as the magnetic core and silica as the shell of the particle. The shell thickness can be controlled by changing the TEOS concentration. The PANI/SiO₂/γ-Fe₂O₃ composites revealed a multilayer core-shell structure, where PANI is the outer shell of the composite. The doping level and the conductivity of PANI/SiO₂/γ-Fe₂O₃ composites decreased with increasing the TEOS content due to the presence of the less coated PANI on the SiO₂/γ-Fe₂O₃ core at higher TEOS content. For a SQUID analysis at room temperature, all γ-Fe₂O₃ containing composites showed a typical superparamagnetic behavior. The saturation magnetization of SiO₂/γ-Fe₂O₃ nanoparticles decreased with increasing the TEOS content due to the increase in silica shell thickness, while the saturation magnetization of PANI/SiO₂/γ-Fe₂O₃ composites also decreased with increasing the TEOS content, which is attributed to the lower conductivity of PANI in the composites at higher TEOS content.     

SAXS测定二氧化硅胶体粒子结构

本文考察了正硅酸乙酯(TEOS)在碱性催化条件下通过水解和缩聚而制得的二氧化硅胶体的小角X-射线散射(SAXS)特征，通过散射数据对Porod负偏离的分析和校正，测定了胶体粒子的几何结构，包括胶团尺度分布、胶核尺度分布及平均界面层厚度，这有助于认识胶体的物理化学特征。     

Characterization of silica-coated hematite and application to the formation of composite particles including egg yolk PC liposomes

According to the method of Ohmori et al. (J. Colloid Interface Sci. 150 (1992) 594), a procedure is examined for the buildup of uniform silica layers on monodispersed hematite particles. It appears that the silica layer resulting is homogeneous and the layer thickness is controlled by the concentration of tetraethylorthosilicate (TEOS) in the medium. Further, egg PC liposomes, a typical biocolloid, are introduced onto the silica-coated hematite particle. The formation was proceeded by two types of processes: (1) heterocoagulation between the silica-coated hematite and egg PC liposomes by controlling the concentration of LaCl(3) in the medium, or (2) buildup using two proteins (lysozyme or cytochrome C) as binder molecules. These results were analyzed by zeta-potential measurements and a contact-type X-ray microscope, which is a unique technique for obtaining X-ray images of biological specimens in water with high resolution.