层状、花形和棒状钛酸铋纳米结构的可控合成及光催化性能

通过可控水热法,制备出层状、花形和棒状钛酸铋(Bi₄Ti₃O₁₂,BIT)纳米结构。通过X射线衍射(XRD)和场发射扫描电子显微镜(FESEM)观测其结构和形貌特征。XRD图显示,所制备的样品为层状钙钛矿结构。FESEM结果表明,通过控制水热过程的反应参数可以得到不同形貌的纳米粉体。紫外-可见漫反射光谱(UV-VisDRS)表明BIT样品的带隙能约为2.63~2.95eV。利用可见光(λ>420nm)照射下的甲基橙降解实验评价了BIT样品的光催化性能。结果表明,BIT的光催化活性比掺氮TiO₂(N-TiO₂)高得多。所制备的层状BIT纳米结构光催化效率最高,经可见光照射360min,甲基橙溶液的降解率可达95.0%。同时还研究了结构和形貌对不同条件下制备的BIT样品光催化活性的影响。     

不同形貌Bi4Ti3O12粒子的可控合成及光催化性能

研究了用一步水热法制备的不同形貌的钛酸铋(Bi₄Ti₃O₁₂, BIT)粒子的光学和可见光催化性能, 并对其晶体结构和微观结构用X射线衍射(XRD)、场发射扫描电子显微镜(FESEM)、透射电子显微镜(TEM)和高分辨透射电子显微镜(HRTEM)等手段进行了表征. XRD结果表明, 所制备的BIT 样品为层状钙钛矿结构. FESEM结果表明, 通过控制水热过程的反应参数可以得到不同形貌的纳米粒子. 紫外-可见漫反射光谱(UV-Vis DRS)表明BIT 样品的带隙能约为2.88-2.93 eV. 利用可见光(λ>420 nm)照射下的甲基橙(MO)降解实验评价了BIT 样品的光催化性能. 结果表明, BIT 的光催化活性比掺氮TiO₂ (N-TiO₂)高得多. 研究了形貌对BIT 光催化性能的影响. 所制备的BIT纳米带光催化效率最高, 经可见光照射360 min, 甲基橙溶液的降解率可达到95.0%.     

掺镁钛酸钡纳米棒的水热合成和光催化性能

用水热法制备掺镁钛酸钡(Ba1-xMgxTiO3(x=0,0.10,0.20,0.30,0.40),BMT)纳米粉体。运用X射线衍射仪(XRD)、场发射扫描电子显微镜(FESEM)、透射电子显微镜(TEM)、紫外可见漫反射光谱技术(DRS)等手段对样品进行了表征,并在可见光照射下于溶液中考察了其光催化降解甲基橙反应活性。结果表明,通过控制氢氧根浓度可以得到不同形貌的纳米粉体。基于不同条件下制备的样品的微结构分析,提出了这些不同形貌的形成机制。制备出的BMT材料的带隙能约为2.61 eV。光催化反应结果表明BMT的光催化活性比掺氮TiO2高得多。OH-浓度为8 mol·L-1时制备的BMT纳米棒光催化效率最高,经可见光照射360 min,浓度为0.01 mmol·L-1甲基橙溶液的降解率可达到93.0%,且循环使用4次后,其光催化活性并没有明显降低,表明BMT是一种稳定有效的可见光催化剂.     

低共熔溶剂中纳米氧化锌的制备及形貌调控

分别以工业氧化锌、氯化锌和草酸锌为锌源,氯化胆碱-尿素低共熔溶剂为溶剂,通过沉淀法制备了不同结构和形貌的纳米氧化锌。通过X射线衍射仪(XRD)、扫描电子显微镜(SEM)和甲基橙光催化降解对样品进行了表征,分析了锌源变化对产物形貌的影响以及不同形貌氧化锌形成过程中前驱体的调控作用及反应机理。并将制备的不同形貌氧化锌应用于光催化降解甲基橙。结果表明制备的由纳米晶组装而成的厚块状Zn O纳米结构对甲基橙有良好的光催化性能。     

钒酸铟分级结构微米花和纳米线的水热合成和可见光催化性能

采用水热法合成InVO4分级结构微米花和InVO4纳米线．FESEM结果表明,通过控制水热反应参数可以获得不同形貌InVO4晶体．利用可见光（λ〉420nm）照射下的罗丹明B降解实验评价了InVO4样品的光催化性能．结果表明,InVO4的光催化活性比商用P25 TiO2高得多,其中花状InVO4纳米结构光催化效率最高,经可见光照射40min,岁丹明B溶液（3μmol／L）的降解率可达100％．同时还研究了结构和形貌对不同条件下制备的InVO4样品光催化活性的影响．     

Bi3.25Nd0.75Ti3O12纳米结构: 可控合成及其可见光催化活性

用水热法制备不同形貌的掺钕钛酸铋(Bi3.25Nd0.75Ti3O12,BNdT)纳米粉体.透射电子显微镜(TEM)结果表明,通过控制OH-浓度可以得到不同形貌的纳米粉体.基于不同条件下制备的样品微结构分析,提出了这些不同形貌的形成机制.紫外-可见漫反射光谱(UV-Vis DRS)表明BNdT样品的带隙能(Eg)约为1.984 eV.利用可见光照射下甲基橙降解实验评价了BNdT样品的光催化性能.结果表明,BNdT的光催化活性比商用TiO2催化剂P25和掺氮TiO2高得多.OH-浓度为10 mol·L-1时制备的BNdT纳米线光催化效率最高,经可见光照射360min,浓度为0.01 mmol·L-1甲基橙溶液的降解率可达到93.0%,且循环使用4次后,其光催化活性并没有明显降低,表明BNdT是一种稳定有效的可见光催化剂.     

Bi3.25Sm0.75Ti3O12纳米线的水热合成及可见光催化性能

用一步水热法制备了直径约为40 nm的Bi3.25Sm0.75Ti3O12(BSmT)纳米线。BSmT纳米线为层状钙钛矿结构。紫外可见漫反射光谱表明,制备出的BSmT材料的带隙能约为2.67 eV。催化反应结果表明,BSmT的光催化活性比掺氮TiO2(N-TiO2)和纯相钛酸铋(Bi4Ti3O12,BIT)高得多,经可见光照射360 min,浓度为0.01 mmol.L-1甲基橙溶液的降解率可达到92.0%。BSmT光催化剂具有更高催化活性的原因是Sm3+离子掺杂拓展了BIT对可见光的吸收范围,同时抑制了BIT的光生电子-空穴的复合。并且BSmT光催化剂经循环使用4次后,其光催化活性并没有明显降低,表明BSmT是一种稳定有效的可见光催化剂。     

碳纳米管/TiO_2复合材料的制备及表征研究

采用溶胶-凝胶法和水热合成法,制备出碳纳米管/TiO2(CNTs/TiO2)复合材料。通过X-射线衍射仪(XRD)、扫描电子显微镜(SEM),紫外-可见漫反射光谱(UV-Vis),荧光光谱(LS)检测CNTs/TiO2的晶型及形貌。结果表明:锐钛矿相TiO2纳米颗粒负载在碳纳米管的管壁上,CNTs/TiO2在紫外-可见光波长范围均有较好的吸收性能。在灭菌灯照射下,以甲基橙溶液为降解目标,CNTs/TiO2复合材料对甲基橙溶液的降解有高的光催化活性,180 min内降解率达到85%以上。     

ZnO自组装薄膜的可控生长及其光催化性能

通过改变工艺参数, 制得了粒径可控的ZnO自组装薄膜. 该薄膜在可见光区域出现了光子带隙. 以染料甲基橙的光催化降解为模型评价了ZnO自组装薄膜的光催化活性. 利用X射线衍射仪(XRD)和扫描电子显微镜(SEM)表征了ZnO的晶体结构和微观形貌. 实验结果表明, ZnO自组装薄膜在太阳光照射下表现出良好的光催化性能, 其光催化活性随着ZnO颗粒粒径的减小而提高. ZnO自组装薄膜光催化降解甲基橙的反应符合一级反应动力学规律.     

海绵状纳米结构TiO2膜的制备及其光催化活性

采用电化学阳极氧化法在钛表面构筑了海绵状纳米结构TiO2膜. 应用扫描电子显微镜(SEM)和X射线衍射(XRD)对膜层的形貌和晶型进行了分析和表征, 考察了阳极氧化时间对膜层厚度的影响, 并通过海绵状纳米结构TiO2膜对甲基橙的光催化降解研究了膜层厚度与光催化活性的关系. 结果表明, 海绵状纳米结构TiO2膜对甲基橙具有光催化降解作用, 而且随着膜层厚度的增加, 光催化降解速率显著增大, 厚度为2.2 μm的海绵状纳米结构TiO2膜对甲基橙的光催化降解速率是厚度为480 nm的6.4倍.     

Organogermyl,Organostannyl, and Organoplumbyl Phosphines,Arsines, Stibines,and Bismuthines

The preparation, properties, and reactions of the compounds named in the title are described, with particular reference to the possible participation of (p→d)_π components in the bonding between the group IVB and the group VB elements.     

Pyrenes,Peropyrenes, and Teropyrenes: Synthesis,Structures, and Photophysical Properties

The design of a relatively simple and efficient method to extend the π‐conjugation of readily available aromatics in one‐dimension is of significant value. In this paper, pyrenes, peropyrenes, and teropyrenes were synthesized through a double or quadruple benzannulation reaction of alkynes promoted by Brønsted acid. This novel method does not involve cyclodehydrogenation (oxidative aryl–aryl coupling) to arrive at the newly incorporated large arene moieties. All of the target compounds were synthesized in moderate to good yields and were fully characterized with the structures unambiguously confirmed by X‐ray crystallography. As expected, photophysical characterization clearly shows increasing red‐shifts as a function of extended conjugation within the fused ring systems.     

Pyrenes,Peropyrenes, and Teropyrenes: Synthesis,Structures, and Photophysical Properties

The design of a relatively simple and efficient method to extend the π‐conjugation of readily available aromatics in one‐dimension is of significant value. In this paper, pyrenes, peropyrenes, and teropyrenes were synthesized through a double or quadruple benzannulation reaction of alkynes promoted by Brønsted acid. This novel method does not involve cyclodehydrogenation (oxidative aryl–aryl coupling) to arrive at the newly incorporated large arene moieties. All of the target compounds were synthesized in moderate to good yields and were fully characterized with the structures unambiguously confirmed by X‐ray crystallography. As expected, photophysical characterization clearly shows increasing red‐shifts as a function of extended conjugation within the fused ring systems.     

Structural, magnetic, and spectroscopic studies of YAgSn, TmAgSn, and LuAgSn

The rare earth-silver-stannides YAgSn, TmAgSn, and LuAgSn were synthesized from the elements by arc-melting and subsequent annealing. The three stannides were investigated by X-ray powder and single-crystal diffraction: NdPtSb type, P6₃mc, Z=2, a=468.3(1), pm, wR₂=0.0343, 353 F² values, 12 variables for YAgSn, and ZrNiAl type, P6¯2 m, a=726.4(2), , wR₂=0.0399, 659 F² values, 15 variables for TmAgSn, and a=723.8(2), , wR₂=0.0674, 364 F² values, 15 variables for LuAgSn. Besides conventional laboratory X-ray data with monochromatized Mo radiation, the structures were also refined on the basis of synchrotron data with , in order to clarify the silver-tin ordering more precisely. YAgSn has puckered, two-dimensional [AgSn] networks with Ag-Sn distances of 278 pm, while the [AgSn] networks of TmAgSn and LuAgSn are three-dimensional with Ag-Sn distances of 279 and 284 pm for LuAgSn. Susceptibility measurements indicate Pauli paramagnetism for YAgSn and LuAgSn. TmAgSn is a Curie-Weiss paramagnet with an experimental magnetic moment of 7.2 μ_B/Tm. No magnetic ordering is evident down to 2 K. The local environments of the tin sites in these compounds were characterized by ¹¹⁹Sn Mössbauer spectroscopy and solid-state NMR (in YAgSn and LuAgSn), confirming the tin site multiplicities proposed from the structure solutions and the absence of Sn/Ag site disordering. Mössbauer quadrupolar splittings were found in good agreement with calculated electric field gradients predicted quantum chemically by the WIEN2k code. Furthermore, an excellent correlation was found between experimental ¹¹⁹Sn nuclear magnetic shielding anisotropies (determined via MAS-NMR) and calculated electric field gradients. Electronic structure calculations predict metallic properties with strong Ag-Sn bonds and also significant Ag-Ag bonding in LuAgSn.     

Borinium, borenium, and boronium ions: synthesis, reactivity, and applications

Boron cations are elusive and highly electrophilic species that play a key role in the chemistry of boron. Despite early interest in the chemistry of boron cations, until recently they have largely remained chemical curiosities. However, hints at harnessing their potential as potent electrophiles have begun to appear and developments in weakly coordinating anion technology suggest that this is an area of research that is ripe for exploration. It has been nearly 20 years since the last major review on boron cations; herein we summarize the progress in the area since that time.     

Pi bonding and negative hyperconjugation in mono-, di-, and triaminoborane, -alane, -gallane, and -indane

A systematic quantum chemical investigation of mono-, di-, and triaminoborane, -alane, -gallane, and -indane is carried out to determine quantitatively the effects of pi bonding and negative hyperconjugation on structures, energetics, and rotational barriers in these systems. Pi bonding plays a significant role in the aminoborane compounds, but becomes rapidly less significant in the aminoalanes, -gallanes, and -indanes. For each main-group metal X investigated, X-N rotational barriers are found to be essentially equal depending only on the number of remaining in-plane amino groups. The contribution of negative hyperconjugation to reducing rotational barriers, as assessed from natural bond orbital (NBO) delocalization energies, is independent of the pyramidalization of the out-of-plane amino group, and is also dependent only on the number of rotated groups. Optimized tris[bis(trimethylsilyl)amino]-substituted structures of boron, aluminum, gallium, and indium are found to compare quite well with available experimental structural data, and exhibit X-N torsion angles that are independent of the central metal atom.     

铬,硒,镉,锰与心脑血管疾病

通过对５０例心脑血管疾病病人及５０例健康对照组血中微量元素铬、硒、镉、锰的检测分析证实，心脑血管疾病病人血清Ｃｒ、Ｓｅ含量下降，Ｃｄ含量未见明显升高，并进一步探讨了这些微量元素与心脑血管疾病的发生发展的关系及其临床意义。     

Rare-Earth-compound nanowires, nanotubes, and fullerene-like nanoparticles: synthesis, characterization, and properties

Various low-dimensional nanostructures, such as nanowires, nanotubes, nanosheets, and fullerene-like nanoparticles have been selectively synthesized from rare-earth compounds (hydroxides, fluorides) based on a facile hydrothermal method. The subsequent dehydration, sulfidation, and fluoridation processes lead to the formation of rare-earth oxide, oxysulfide, and oxyhalide nanostructures, which can be functionalized further by doping with other rare-earth ions or by coating with metal nanoparticles. Owing to the interesting combination of novel nanostructures and functional compounds, these nanostructures can be expected to bring new opportunities in the vast research areas of and application in biology, catalysts, and optoelectronic devices.     

Synthesis of yttrium,lanthanum, neodymium,praseodymium, and lutetium alkoxides and acetylacetonates

A convenient and practical method is proposed for the synthesis of lanthanide and yttrium alkoxides. The method involves dissolving the metals or their hydrides in a solution of dry HCl in the corresponding alcohol, with subsequent dehalogenation of the LnCl₃ solution by an equivalent amount of alkali metal (Na, Li), The rareearth alkoxides are easily converted into acetylacetonates Ln(acac)₃ by the action of acetylacetone.A. N. Nesmeyanov Institute of Elementoorganic Compounds, Russian Academy of Sciences, 117813 Moscow. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 11, pp. 2490–2493, November, 1992.