有机官能化介孔硅基材料负载纳米金催化剂的制备及其催化性能

一步合成了桥键嵌入二硫醚官能化介孔硅基材料(PMO-SBA-15),利朋介孔硅基材料孔道内表面的二硫醚基团捕获纳米金(Au)粒子的作用,获得了负载型纳米Au催化剂(Au-PMO-SBA-15).小角X射线衍射和低温N2吸附-脱附的结果表明,PMO-SBA-15和Au-PMO-SBA-15均保持典型的介孔结构;高分辨透射电镜观察到纳米Au粒子在载体孔道内分散均匀,甲均粒径为(2.2±0.2)nm.以70%的叔丁基过氧化氧水溶液为氧化剂,考察了纳米Au催化剂Au-PMO-SBA-15在苯甲醇氧化反应中的催化性能.结果表明,当反应温度为353 K、反应时间为5 h时,苯甲醇的转化率为29.1%,苯甲醛的选择性为100%,且催化剂重复使用7次其催化活性和苯甲醛选择性基奉不变.     

负载Cr(VI)纳米Fe_3O_4磁性高分子材料的催化性能

采用氨基功能化纳米Fe3O4磁性高分子材料(NH2-NMPs)处理含Cr(VI)水溶液,得到了吸附重金属Cr(VI)后回收材料(Cr-NH2-NMPs).通过透射电镜(TEM)、振动样品磁强计(VSM)、热重差热分析(TGA)、X射线粉末衍射(XRD)、红外光谱(FTIR)等对其进行表征.着重研究了以苯甲醇为底物,30%的H2O2为氧化剂,Cr-NH2-NMPs对醇的选择性氧化的催化性能.详细考察了H2O2用量与加入方式、反应时间、反应温度、反应体系中加入酸的种类与用量、催化剂用量、溶剂种类等因素对催化氧化性能的影响,推导出可能的催化机理.结果表明:吸附重金属Cr(VI)后回收材料(Cr-NH2-NMPs)能有效催化苯甲醇氧化至苯甲醛.反应温度为70℃,环己烷为溶剂,在适量质子酸作用下,H2O2与苯甲醇的物质的量比为3.2:1时,苯甲醇的转化率及苯甲醛的选择性均达100%,可以实现"变废为宝"的目的.     

钨过氧酸盐离子液体催化过氧化氢氧化苯甲醇制苯甲酸

用甲基三辛基氯化铵和钨酸钠一步法合成甲基三辛基季铵钨酸盐离子液体[(CH3)N(n-C8H17)3]2W2O11,以该离子液体为催化剂,在无反应溶剂条件下催化过氧化氢氧化苯甲醇生成苯甲酸。 考察了反应温度、催化剂用量以及氧化剂过氧化氢用量对苯甲酸产率的影响。 确定优化条件：反应温度70 ℃,苯甲醇用量5 mmol,催化剂用量是底物的0.4%(摩尔分数),30%过氧化氢用量2 mL,苯甲醇的转化率可达99%,苯甲酸选择性为98%。 该方法具有反应条件温和、产率高和选择性好的优点。     

Cu-BTC及其衍生物在苯甲醇选择氧化反应中的催化活性

以硝酸铜和均苯三甲酸(BTC)为原料,水热合成了一种金属有机骨架化合物Cu-BTC,在水相中催化苯甲醇选择氧化反应,H2O2氧化剂,优化了Cu-BTC的晶化条件.70℃反应1 h,Cu-BTC(110C/24 h)上的苯甲醇转化率为75.4%、苯甲醛选择性83.5%,但反应后Cu-BTC骨架完全塌陷.在氮气中高温焙烧Cu-BTC,制得衍生物Cu@C,也用于催化苯甲醇氧化反应.结果表明:Cu@C催化剂重复使用5次,可维持较高的苯甲醇转化率,但苯甲醛选择性有所下降.用X射线衍射(XRD)、N2物理吸附(BET)、热分析(TG-DSC)、红外光谱(FTIR)、能量色散X射线光谱分析(EDX)等技术对催化剂进行了结构表征,发现:Cu@C在反应中生成的Cu2O促进了苯甲醛的深度氧化.     

金属次卟啉二甲酯催化氧化苯乙烯制苯甲醛

将金属次卟啉二甲酯用作叔丁基过氧化氢（TBHP）氧化苯乙烯制苯甲醛的催化剂。 考察了催化剂、氧化剂用量、反应温度、时间、溶剂和不同金属次卟啉二甲酯[M(DPDME)]对苯乙烯转化率及苯甲醛选择性的影响,初步探索了反应机理。 结果表明,金属次卟啉二甲酯能够顺利地选择性催化氧化苯乙烯生成苯甲醛。 以0.002 mmol锰次卟啉二甲酯[ClMn(DPDME)]为催化剂,0.4 mmol TBHP为氧化剂,1 mmol苯乙烯为底物,5 mL CH3CN/H2O(体积比4∶1)为溶剂,反应温度75 ℃,常压反应20 h,苯乙烯的转化率达到98.3%,苯甲醛的选择性为92.7%。     

Ag/SBA-15低温气相选择性催化氧化苯甲醇合成苯甲醛（英文）

以SBA-15为载体,采用浸渍法制备了不同Ag含量的Ag/SBA-15,通过N2吸附-脱附、X射线衍射、扫描电子显微镜、高分辨透射电子显微镜、X射线光电子能谱和电感耦合等离子体质谱对催化剂进行了表征.将Ag/SBA-15用于苯甲醇气相选择性催化氧化合成苯甲醛,研究了反应条件对转化率和选择性的影响.结果表明,Ag/SBA-15具有均一的一维孔道结构、较厚的孔壁(3–5 nm)及较大的比表面积(411–541 m2/g),其规整纳米空间的限域作用使一定负载量的Ag以纳米尺寸均匀分散于介孔SBA-15孔道内,增加了活性组分的比表面积.亲核性氧物种从Ag到SBA-15表面的氧溢流,提高了低温下Ag/SBA-15对苯甲醇气相选择性氧化合成苯甲醛的催化性能.5.3%Ag/SBA-15中的Ag粒径为5–6 nm,且均匀分散于载体孔道中,反应温度为220°C时,苯甲醇转化率为87%,苯甲醛选择性为95%;240°C时,苯甲醇转化率和苯甲醛选择性分别高达94%和97%;并在240–300°C范围内,其催化活性和选择性保持不变,表现出了良好的温度耐受能力.催化剂经活化再生可以连续使用40 h,选择性基本保持不变.     

离子液体中V2O5催化环己烯选择氧化合成 2-环己烯酮

研究了以V2O5为催化剂,H2O2为氧化剂,在室温离子液体中环己烯氧化制备2-环己烯酮的反应.考察了离子液体种类、反应温度、催化剂用量和氧化剂用量等因素对2-环己烯酮产率的影响.结果表明,在H2O2用量为110 mmol,V2O5/环己烯摩尔比为2%,反应温度为313 K的条件下,在[bmim]BF4离子液体中反应10 h后,环己烯的转化率和2-环己烯酮选择性分别为88.7%和91.1%.对含离子液体的催化体系的重复使用性能进行了考察.结果发现,随着使用次数的增加,环己烯的转化率以及2-环己烯酮的选择性有所下降.     

钛钨改性HMS的合成及催化氧化苯甲醇合成苯甲醛

通过改变硅钛摩尔比和硅钨摩尔比合成了Ti-HMS和Ti/W-HMS型分子筛,并进行了NH3-TPD测试分析. 结果表明,当n(Si)∶ n(Ti)=30∶ 1、n(Si)∶ n(W)=400∶ 1时,分子筛的酸量最大. 利用上述不同HMS为催化剂,ω(H2O2)=30%的H2O2水溶液为氧化剂,在无有机溶剂及相转移催化剂条件下,氧化苯甲醇制备苯甲醛. 结果表明,Ti/W-HMS可选择性氧化苯甲醇制备苯甲醛;催化剂的酸量和酸强度越大,越有利于提高催化活性和选择性. 利用Ti(30)/W(400)-HMS为催化剂,当n(醇)∶ n(H2O2)=1∶ 2、ω(催化剂)=4%、反应时间为5 h时,苯甲醇的转化率和苯甲醛的选择性分别为72.6%、96.9%. 催化剂重复使用4次后,苯甲醇的转化率和苯甲醛的选择性分别为63.2%、89.1%.     

Dawson-型磷钼钒杂多酸盐相转移选择催化氧化苯甲醇合成苯甲醛反应研究

以Dawson型磷钼钒杂多酸盐为相转移催化剂，用过氧化氢水溶液为氧化剂，研究了苯甲醇液相选择氧化制苯甲醛的反应．系统考察了催化剂的类型、催化剂用量、反应温度和反应时间等因素对反应的影响．结果表明：(Cpry)6HP2Mo17VO62／H2O2／H2O是一可循环使用的苯甲醇选择氧化制苯甲醛的高效环境友好催化剂体系，适宜的反应条件为，催化剂用量2μmol，H2O2 10mmol，反应温度80℃，反应时间8h．     

Ag/SBA-15低温气相选择性催化氧化苯甲醇合成苯甲醛

以SBA-15为载体,采用浸渍法制备了不同Ag含量的Ag/SBA-15,通过N₂吸附-脱附、X射线衍射、扫描电子显微镜、高分辨透射电子显微镜、X射线光电子能谱和电感耦合等离子体质谱对催化剂进行了表征。将Ag/SBA-15用于苯甲醇气相选择性催化氧化合成苯甲醛,研究了反应条件对转化率和选择性的影响。结果表明,Ag/SBA-15具有均一的一维孔道结构、较厚的孔壁（3-5 nm）及较大的比表面积（411-541 m²/g）,其规整纳米空间的限域作用使一定负载量的Ag以纳米尺寸均匀分散于介孔SBA-15孔道内,增加了活性组分的比表面积。亲核性氧物种从Ag到SBA-15表面的氧溢流,提高了低温下Ag/SBA-15对苯甲醇气相选择性氧化合成苯甲醛的催化性能。5.3% Ag/SBA-15中的Ag粒径为5-6 nm,且均匀分散于载体孔道中,反应温度为220℃时,苯甲醇转化率为87%,苯甲醛选择性为95%;240℃时,苯甲醇转化率和苯甲醛选择性分别高达94%和97%;并在240-300℃范围内,其催化活性和选择性保持不变,表现出了良好的温度耐受能力。催化剂经活化再生可以连续使用40 h,选择性基本保持不变。     

超临界二氧化碳中功能化聚乙二醇稳定的钯纳米粒子催化醇的选择氧化反应

 以超临界二氧化碳 (scCO2)/聚乙二醇 (PEG) 两相为反应介质, 双齿氮配体功能化聚乙二醇稳定的 Pd 纳米颗粒作为催化剂, 进行了醇的需氧氧化反应. 系统研究了催化剂制备条件和反应条件对苯甲醇需氧氧化反应的影响. 结果表明, 以氢气为还原剂制备的 Pd 纳米粒子的催化活性最高. 反应结束后, 可以利用 scCO2 直接进行原位萃取得到产物, 实现了催化剂与产物的有效分离和催化剂的循环使用. 反应中没有检测到钯的流失. 催化剂经过 5 次循环利用后转化率仍可达 98%.     

Bimetallic Au/Pd catalyzed aerobic oxidation of alcohols in the poly(ethylene glycol)/CO2 system

Bimetallic Au/Pd nanoparticles were prepared and used to catalyze oxidation of alcohols in the poly(ethylene glycol) (PEG)/CO₂ biphasic system using O₂ as the oxidant without adding any base. The catalytic activity of Au/Pd bimetal with different mole ratios was studied using benzyl alcohol as the substrate. It was found that bimetallic Au/Pd nanoparticles with Au:Pd=1:3.5 had higher catalytic activity than monometallic Au, Pd and the bimetallic Au/Pd nanoparticles with other molar ratios. The effect of CO₂ pressure on the oxidation of benzyl alcohol and 1-phenylethanol in PEG/CO₂ was investigated. It was demonstrated that CO₂ pressure could be used to tune the conversion and selectivity of the reactions effectively. α,β,-Unsaturated alcohols were also studied and found to be more reactive than benzyl alcohol and 1-phenylethanol. Recycling experiments showed that the Au/Pd/PEG/CO₂ catalytic system could be recycled at least four times without reducing the activity. In addition, the catalytic system is clean and the products can be separated easily.     

Enhanced water-induced effects enabled by alkali-stabilized Pd-OHx species for oxidation of benzyl alcohol

The water promotion effects, where water can provide a solution-mediated reaction pathway in various heterogeneous chemical catalysis, have been presented and attracted wide attention recently, yet, the rational design of catalysts with a certain ability of enhancing water-induced reaction process is full of challenges and difficulties. Here, we show that by incorporating alkali (Na, K) cations as an electronic and/or structural promoter into Pd/rGO-ZnCr₂O₄ (rGO, reduced graphene oxide), the obtained Pd(Na)/rGO-ZnCr₂O₄ as a representative example demonstrates an outstanding benzyl alcohol oxidation activity in the Pickering emulsion system in comparison to the alkali-free counterpart. The response experiments of water injection confirm the enhanced activity, and the Na-modified catalyst can further enhance the promotion effects of water on the reaction. The effects of alkali cations for Pd nanoparticles are identified and deciphered by a series of experimental characterizations (XPS, in situ CO-DRIFTS, and CO-TPR coupled with MS), showing that there is abundant −OH on the surface of the catalyst, which is stabilized by the formation of Pd−OH_x. The alkali-stabilized Pd−OH_x is helpful to enhance the water-induced reaction process. According to the results of in situ Raman as well as UV-vis absorption spectra, the Na-modulated Pd(Na)/rGO-ZnCr₂O₄ enables the beneficial characteristics for distorting the benzyl alcohol structure and enhancing the adsorption of benzyl alcohol. Further, the mechanism for enhanced water promotion effects is rationally proposed. The strategy of alkali cations-modified catalysts can provide a new direction to effectively enhance the chemical reaction involving small molecule water.     

Selective oxidation of alcohols with hydrogen peroxide catalyzed by tungstate ions (WO4) supported on periodic mesoporous organosilica with imidazolium frameworks (PMO-IL)

Tungstate ions supported on the periodic mesoporous organosilica with ionic liquid frameworks (WO₄⁼@PMO-IL) were found to be a recoverable catalyst system for the highly selective oxidation of various primary or secondary alcohols to the corresponding aldehydes or ketones by 30% H₂O₂ as green oxidant under neutral aqueous reaction conditions. The catalyst can be also recovered and efficiently reused in seven subsequent reaction cycles without any remarkable decreasing in the catalyst activity and selectivity. Moreover, N₂ sorption analysis, transmission electron microscopy (TEM) images, and thermal gravimetric analysis (TGA) showed that the structure regularity and functional groups loaded of the catalyst were not affected during the reaction process.     

离子液体功能化有序介孔SBA-15孔壁定域化磷钨酸催化活性中心构建及其催化性能

采用溶胶-凝胶法合成了一种桥键嵌入型双咪唑离子液体功能化介孔硅基材料(Bis-PImBr-PMO-SBA-15),然后离子交换将Keggin型磷钨酸负载于其上,制备了PW-Bis-PImBr-PMO-SBA-15催化剂,并运用X射线衍射、N2吸附-脱附、透射电子显微镜、傅里叶变换红外光谱和热重分析等手段对其进行表征.结果表明,该催化剂具有SBA-15分子筛的有序六方孔道结构,且负载后的磷钨酸阴离子仍保持其完整的Keggin结构.在以水为溶剂,30%H2O2为氧化剂的苯甲醇氧化反应中,该催化剂表现出比均相的或负载于SBA-15表面的Keggin型HPW更高的催化活性,苯甲醇转化率和苯甲醛选择性分别可达95%和94%.离子液体的咪唑阳离子可调节磷钨酸阴离子的氧化-还原性能,从而有利于提高催化剂的催化活性..     

Iron Incorporated Mesoporous Molecular Sieves Synthesized by a Microwave-Hydrothermal Process and Their Application in Catalytic Oxidation

Fe-FSM-16 and Fe-containing mesoporous materials (Fe-JLU-15) prepared by using semifluorinated surfactant as a template, have been synthesized by microwave-hydrothermal (M-H) process and characterized by several spectroscopic techniques. The catalytic activity of these materials was tested for the phenol hydroxylation and wet phenol oxidation with H₂O₂ under mild reaction conditions. The effect of pH, H₂O₂/PhOH molar ratio and stability of the catalyst on the oxidation process was also investigated. Phenol oxidation and H₂O₂ decomposition show that the Fe-JLU-15 is more active than Fe-FSM-16 and more stable in aqueous solution. The total amount of dissolved iron is less than 5 wt% of the iron initially contained in the catalyst. In phenol hydroxylation, these two solids can effectively catalyze the phenol hydroxylation. Catechol and hydroquinone were observed as the major products, with a difference in the product distribution for these solids. The Fe-JLU-15 has a high selectivity for catechol (63.5 % phenol conversion, CAT/HQ = 2.7) while the Fe-FSM-16 shows a high selectivity for hydroquinone (56.8 % phenol conversion, CAT/HQ < 1) under the same reaction conditions.     

Selective Production of Secondary Amine by the Photocatalytic Cascade Reaction Between Nitrobenzene and Benzyl Alcohol over Nanostructured Bi2MoO6 and Pd Nanoparticles Decorated with Bi2MoO6

The synthesis of secondary amine by the photoalkylation of nitrobenzene with benzyl alcohol using a simple light source and sunlight is a challenging task. Herein, a one-pot cascade protocol is employed to synthesize secondary amine by the reaction between nitrobenzene and benzyl alcohol. The one-pot cascade protocol involves four reactions: (a) photocatalytic reduction of nitrobenzene to aniline, (b) photocatalytic oxidation of benzyl alcohol to benzaldehyde, (c) reaction between aniline and benzaldehyde to form imine, and (d) photocatalytic reduction of imine to a secondary amine. The cascade protocol to synthesize secondary amine is accomplished using Bi₂MoO₆ and Pd nanoparticles decorated Bi₂MoO₆ catalysts. The surface characteristics, oxidation states, and elemental compositions of the materials are characterized by several physicochemical characterization techniques. Optoelectronic and photoelectrochemical measurements are carried out to determine the bandgap, band edge potentials, photocurrents, charge carrier's separation, etc. An excellent yield of secondary amine is achieved with simple household white LED bulbs. The catalyst also exhibits similar or even better activity in sunlight. The structure-activity relationship is established using catalytic activity data, control reactions, physicochemical, optoelectronic characteristics, and scavenging studies. Bi₂MoO₆ and Pd nanoparticles decorated Bi₂MoO₆ exhibit excellent photostability and recyclability. The simple catalyst design with a sustainable and economical light source for the synthesis of useful secondary amine from the nitrobenzene and benzyl alcohol would attract the researchers to develop similar catalytic protocols for other industrially important chemicals.     

Magnetic methylene-based mesoporous organosilica composite-supported IL/Pd: a powerful and highly recoverable catalyst for oxidative coupling of phenols and naphthols

A novel magnetic methylene-based mesoporous organosilica composite-supported IL/Pd complex (Fe₃O₄@MePMO-IL/Pd) was synthesized and characterized, and its catalytic performance was investigated. The preparation of the Fe₃O₄@MePMO composite was achieved through coating of Fe₃O₄ nanoparticles with a mixture of tetramethoxysilane, bis(triethoxysilyl)methane, and (3-chloropropyl)-trimethoxysilane in the presence of cetyltrimethylammonium bromide surfactant. The Fe₃O₄@MePMO was then modified with alkyl imidazolium ionic liquid and palladium species to deliver the Fe₃O₄@MePMO-IL/Pd nanocatalyst. This catalyst was characterized using Fourier transform infrared, thermal gravimetric, wide-angle powder X-ray diffraction, low-angle powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometer, energy-dispersive X-ray, and nitrogen adsorption–desorption analyses. The Fe₃O₄@MePMO-IL/Pd was effectively used as a highly recoverable and durable catalyst for the selective oxidative coupling of phenols and 2-naphthols under aerobic conditions.     

聚苯并噁嗪固载钯基纳米催化剂在芳香醇氧化反应中的应用

以球状聚苯并噁嗪为载体, 采用浸渍热解法合成了钯炭纳米催化剂. 通过透射电子显微镜观察发现, 钯纳米粒子几乎全部均匀分布在载体上, 且尺寸均一, 平均直径约为3.5 nm. 结果表明, 载体表面含有丰富的含氮含氧官能团, 氮和氧原子与钯之间存在相互作用, 从而使聚苯并噁嗪能够有效固载钯纳米粒子. 采用相同的方法进一步合成Pd-Au/C和Pd-Pt/C双金属催化剂, Pd-Au和Pd-Pt纳米粒子也展现出良好的分散性, 无明显团聚现象, 平均直径分别为4.3和4.2 nm, 进一步说明聚苯并噁嗪对金属活性组分的有效固载. 将催化剂应用于苯甲醇氧化反应, 其中Pd₁-Au₁/C在2 h的转化率为98%, 对产物苯甲醛的选择性大于99%, 该催化剂经过焙烧可恢复催化活性, 表现出良好的循环稳定性, 并能将不同取代基的芳香醇氧化为相应的醛, 是一种良好的醇氧化催化剂.