共查询到17条相似文献,搜索用时 140 毫秒
1.
Pickering乳液的制备和应用研究进展 总被引:1,自引:0,他引:1
Pickering乳液是一种由固体粒子代替传统有机表面活性剂稳定乳液体系的新型乳液。与传统乳液相比,Pickering乳液具有强界面稳定性、减少泡沫出现、可再生、低毒、低成本等优势,在化妆品、食品、制药、石油和废水处理等行业具有广阔的应用前景,受到越来越多研究者们的关注。本文综述了近年来Pickering乳液的研究进展,先介绍Pickering乳液相对于表面活性剂乳液的特色与优势,然后介绍Pickering乳液的制备研究进展,最后介绍Pickering乳液的应用研究进展。 相似文献
2.
3.
Janus粒子由于在光、电、力、磁及表面亲/疏水性等方面表现出各向异性,因此在稳定乳液、生物医药及功能涂层等方面展现出广阔的应用价值。两亲性Janus粒子是指一侧具有亲水性、另一侧具有疏水性的不对称材料,由于同时具有表面活性剂的性质和固体颗粒的效应,在稳定Pickering乳液方面极具优势。基于此,本文对两亲性Janus粒子的制备方法进行了综述,并对比分析了其优缺点,同时总结了两亲性Janus粒子对Pickering乳液稳定性的影响,最后对其今后的发展进行了展望。 相似文献
4.
由沉淀法和溶胶-凝胶法分别制备了Ni Fe_2O_4和Ti O_2,并用XRD和SEM对两种粒子进行了表征,结果表明成功制备了粒径大小较为均匀的目标产物。用CTAB对Ni Fe_2O_4进行了改性,并由IR和Zeta电位测试予以确认。以改性Ni Fe_2O_4和Ti O_2作为稳定粒子,由两步法制备了W/O/W型多重Pickering乳液,采用数码照片和光学显微照片观察所制备的乳液的宏观与微观形貌。研究表明,制备的单重Pickering乳液粒径较为均匀,多重Pickering乳液粒径范围稍宽,但两者稳定性能都非常良好。 相似文献
5.
6.
互不相溶的油/水两相在固体颗粒的作用下,其中一相以小液滴形式溶于另一相中形成的乳液称为Pickering乳液。由于其制备成本低、稳定性强且环境友好,目前已应用于医药、食品及化妆品等多个领域。在实际的应用中,具有长期稳定性质和可快速乳化/破乳的乳液在石油开采、催化等领域需求广泛,因而制备具有环境刺激响应性质的Pickering乳液迫在眉睫。与pH、磁场、温度、光等刺激手段相比,CO2响应型乳液具有廉价易得、无污染、响应迅速、生物相容性好等优势,是解决产品循环回收问题的有效策略。目前CO2刺激响应型Pickering乳液体系仍处于研究的初级阶段,且该乳液的响应机制、构筑策略仍有待明确和拓展。本文总结了Pickering乳液的稳定/响应机制,综述了CO2响应型Pickering乳化剂的种类及构筑策略,列举了其在乳液聚合、界面催化、生物医药领域的应用进展,并展望了其未来的发展前景。 相似文献
7.
Pickering乳滴模板法制备有机/无机杂化的核壳微球越来越引起人们的关注,主要因为该方法制备出的微球具有以无机粒子为壳层的超粒子结构(supracolloidal structure),能够赋予微球独特的功能.胶体粒子在乳滴表面自组装形成有序的球面胶体壳,得到稳定Pickering乳液,固定乳滴表面的胶体粒子来制备核壳结构的微球或者以胶体粒子为壳层的微胶囊(colloidosome).本文综述了我们课题组以Pickering乳滴模板法制备超粒子结构有机/无机杂化微胶囊包括实心微球方面的工作.我们选择具有不同性能、种类的胶体粒子以及具有不同性质和功能的核材料,采用Pickering乳滴模板法,对吸附在乳滴表面的胶体粒子用不同的固定方法制备具有不同结构和性能的微球和微胶囊,利用基于多重Pickering乳液的聚合技术制备双纳米复合的超粒子结构多核聚合物微球. 相似文献
8.
随着纳米技术的发展以及Pickering乳液在食品、化妆品、医药等领域的潜在应用前景,人们对Pickering乳液给予了关注。本文全面总结了近些年来Pickering乳液的研究进展,对本课题组在Pickering乳液研究领域所取得的成果进行了介绍。本文主要分为4个部分:第一部分概述了Pickering乳液的研究现状;第二部分全面考察了Pickering乳液的各种影响因素;第三部分介绍了Pickering乳液的转相特性;最后综述了颗粒和表面活性物质协同稳定乳液的研究进展。这些研究成果促进了乳液基础理论的发展,并且拓展了乳液的应用范围。 相似文献
9.
10.
颗粒乳化剂的研究及应用 总被引:2,自引:0,他引:2
近年来,颗粒乳化剂因其在食品、采油、化妆品、医药、催化以及功能纳米材料制备等领域具有潜在应用前景而备受关注。本文综述了近来颗粒乳化剂的研究进展,归纳了颗粒乳化剂的种类,包括:无机纳米粒子、表面改性或杂化的无机粒子、有机纳米粒子以及特殊的颗粒乳化剂Janus粒子;并对颗粒乳化剂能够在油水界面稳定吸附的热力学机理和动力学行为进行了阐述,颗粒乳化剂在油水界面接触角以及粒径大小是其在界面稳定吸附的关键参数,而颗粒在油水界面的排布方式则主要受粒子之间相互作用的影响。重点介绍了颗粒乳化剂的热点应用,包括:(1)利用颗粒乳化剂制备Pickering乳液,以及通过对颗粒乳化剂的功能化,使得Pickering乳液具备环境响应性(即pH、盐浓度、温度、紫外光、磁场敏感响应性);(2)以颗粒乳化剂为构筑基元、以Pickering乳液为模板制备Janus颗粒、Colloidosome、具有多级结构的粒子或膜,以及多孔结构材料;(3) Janus粒子在催化领域的应用。 相似文献
11.
The versatility of colloidal particles endows the particle stabilized or Pickering emulsions with unique features and can potentially enable the fabrication of a wide variety of derived materials. We review the evolution and breakthroughs in the research on the use of colloidal particles for the stabilization of Pickering emulsions in recent years for the particle categories of inorganic particles, polymer-based particles, and food-grade particles. Moreover, based on the latest works, several emulsions stabilized by the featured particles and their derived functional materials, including enzyme immobilized emulsifiers for interfacial catalysis, 2D colloidal materials stabilized emulsions as templates for porous materials, and Pickering emulsions as adjuvant formulations, are also summarized. Finally, we point out the gaps in the current research on the applications of Pickering emulsions and suggest future directions for the design of particulate stabilizers and preparation methods for Pickering emulsions and their derived materials. 相似文献
12.
13.
Macroemulsions rendered stable by adsorbed colloidal particles are termed Pickering emulsions. If the volume fraction of dispersed phase exceeds around 0.75, the emulsions are named high internal phase Pickering emulsions abbreviated to HIPPEs, which present new properties and potential applications. We review here the recent progress in preparing and studying HIPPEs of both oil-in-water and water-in-oil types. This includes discussion of the range of solid particle emulsifiers, the choice of the two immiscible liquids and methods for their preparation. As a result of their high interfacial area and long-term stability, HIPPEs are being put to use in many potential applications including drug delivery, catalysis, and in the production of novel porous materials. 相似文献
14.
15.
Alireza Taherpour 《Journal of Dispersion Science and Technology》2013,34(12):1710-1720
Stabilization of emulsions with solid particles can be used in several fields of oil and gas industry because of their higher stability. Solid particles should be amphiphilic to be able to make Pickering emulsions. This goal is achieved by using surfactants at low concentrations. Oil-in-water (o/w) emulsions are usually stabilized by surfactant but show poor thermal stability. This problem limits their applications at high-temperature conditions. In this study, a novel formulation for o/w stabilized emulsion by using silica nanoparticles and the nonionic surfactant is investigated for the formulation of thermally stable Pickering emulsion. The experiments performed on this Pickering emulsion formula showed higher thermal stability than conventional emulsions. The optimum wettability was found for DME surfactant and silica nanoparticles, consequently, in that region; Pickering emulsion showed the highest stability. Rheological changes were evaluated versus variation in surfactant concentration, silica concentration and pH. Scanning electron microscopy images approved the existence of a rigid layer of nanoparticle at the oil-water interface. Finally, the results show this type of emulsion remains stable in harsh conditions and allows the system to reach its optimum rheology without adding any further additives. 相似文献
16.
Pickering Interfacial Catalysis for Biphasic Systems: From Emulsion Design to Green Reactions 下载免费PDF全文
Dr. Marc Pera‐Titus Dr. Loïc Leclercq Dr. Jean‐Marc Clacens Dr. Floryan De Campo Prof. Dr. Véronique Nardello‐Rataj 《Angewandte Chemie (International ed. in English)》2015,54(7):2006-2021
Pickering emulsions are surfactant‐free dispersions of two immiscible fluids that are kinetically stabilized by colloidal particles. For ecological reasons, these systems have undergone a resurgence of interest to mitigate the use of synthetic surfactants and solvents. Moreover, the use of colloidal particles as stabilizers provides emulsions with original properties compared to surfactant‐stabilized emulsions, microemulsions, and micellar systems. Despite these specific advantages, the application of Pickering emulsions to catalysis has been rarely explored. This Minireview describes very recent examples of hybrid and composite amphiphilic materials for the design of interfacial catalysts in Pickering emulsions with special emphasis on their assets and challenges for industrially relevant biphasic reactions in fine chemistry, biofuel upgrading, and depollution. 相似文献
17.
Simple, reversible emulsion system switched by pH on the basis of chitosan without any hydrophobic modification 总被引:2,自引:0,他引:2
Liu H Wang C Zou S Wei Z Tong Z 《Langmuir : the ACS journal of surfaces and colloids》2012,28(30):11017-11024
Chitosan without hydrophobic modification is not a good emulsifier itself. However, it has a pH-tunable sol-gel transition due to free amino groups along its backbone. In the present work, a simple reversible Pickering emulsion system based on the pH-tunable sol-gel transition of chitosan was developed. At pH > 6.0, as adjusted by NaOH, chitosan was insoluble in water. Chitosan nanoparticles or micrometer-sized floccular precipitates were formed in situ. These chitosan aggregates could adsorb at the interface of oil and water to stabilize the o/w emulsions, so-called Pickering emulsions. At pH < 6.0, as adjusted by HCl, chitosan was soluble in water. Demulsification happened. Four organic solvents (liquid paraffin, n-hexane, toluene, and dichloromethane) were chosen as the oil phase. Reversible emulsions were formed for all four oils. Chitosan-based Pickering emulsions could undergo five cycles of emulsification-demulsification with only a slight increase in the emulsion droplet size. They also had good long-term stability for more than 2 months. Herein, we give an example of chitosan without any hydrophobic modification to act as an effective emulsifier for various oil-water systems. From the results, we have determined that natural polymers with a stimulus-responsive sol-gel transition should be a good particulate emulsifier. The method for in situ formation of pH-responsive Pickering emulsions based on chitosan will open up a new route to the preparation of a wide range of reversible emulsions. 相似文献