Quiescent and strain-induced crystallization of poly(p-phenylene terephthalamide) from sulfuric acid solution

Quiescent and strain-induced crystallization of poly(p-phenylene terephthalamide) (PPTA) from sulfuric acid solution has been studied. Negative spherulites (SA-PPTA spherulites) are formed from hot concentrated solutions by cooling. The spherulite consists of radiating fibrous lamellae several hundred angstroms wide. The electron diffraction pattern indicates that PPTA molecules are oriented perpendicular to the long axes of the fibrous lamellae and that the [010] or [110] direction of the modification I crystal and [010] direction of the modification II crystal are parallel to the long axes of the fibrous lamellae. The width of the lamellae is much smaller than the chain length of the starting PPTA. It appears that hydrolysis of PPTA during melting crystallization determines the chain length, i.e., the width of the fibrous lamella. Stacked, lamellar structures like “row structures” are formed under shear. The longer axes of the fibrous lamellae are oriented perpendicular to the shear direction. It is confirmed by electron diffraction studies that the PPTA molecules are oriented parallel to the shear direction. Well-developed fibrils with the PPTA molecules oriented to the fibril axis, are formed by adding the SA-PPTA spherulites to water with vigorous stirring.     

A PYRIDYL-TRIAZINE COMPLEX OF Co(II): SPECTROSCOPIC,STRUCTURAL, AND DOCKING STUDIES

Journal of Structural Chemistry - A new cobalt(II) complex of 5-phenyl-3-(pyridin-2-yl)-1,2,4-triazine (PPTA), [Co(PPTA)2(NO3)2] (1), is prepared and identified by the elemental analysis, FTIR...     

Axial X-ray scattering on high-performance polymeric fibers

High-temperature polymers were spum from liquid-crystalline solutions into fibers of superior thermal stability and mechanical properties. Fibers of two extended-chain polymers poly(p-phenyleneterephthalamide), PPTA, and poly-2,5-benzoxazole, ABPBO, as well as a rod-like polymer poly(p-phenylenebenzobisoxazole), PBO, were examined by axial x-ray scattering. Both wide-angle scattering and small-angle scattering were performed with CuKα radiation aiming along the fiber axis (c-axis) for structural information on the a-b lattice plane. In addition to previously reported lattice structure, the PPTA fibers (Kevlar® 29, 49, and 149) showed strong [004] and a [022] reflections suggesting that segments of the PPTA molecules were transverse to the fiber axis. This unique fiber structure is more prominent and the void content is less for the PPTA fibers with higher tensile modulus, (i.e., Kevlar® 149 > Kevlar® 49 > Kevlar® 29). Similar measurements on thermally annealed ABPBO and PBO fibers showed no [00l], [h0l], or [0kl] reflection indicative of a truly uniaxial molecular orientation. Evidence of microfibrillar order was discovered for the Kevlar® fibers and the ABPBO fiber. Results of conventional x-ray scattering on these fibers were compared and reconciled. © 1994 John Wiley & Sons, Inc.     

New pyrrolopyridazine derivatives as blue organic luminophors

New pyrrolopyridazine derivatives were synthesized as potential blue organic luminophors. Three different classes of pyrrolopyridazine derivatives were made, for example, aryl groups directly connected to the core PPY (pyrrolo[1,2-b]pyridazine-5,6,7-tricarboxylic acid trimethyl ester) moiety, aryl groups connected to the PPY via a vinylene linker and aryl groups connected to the PPY via an acetylene linker. Their optical and electrochemical properties were productively compared. One of the derivatives 2 showed a relative quantum yield as high as 0.9. Compound 8 in the vinyl bridged pyrrolopyridazine series has been characterized by its X-ray crystal structure analysis.     

Synthesis of an amphiphilic spiro-multiblock copolymer via thiol-ene click chemistry

A multiblock [poly(ethylene oxide)-b-spiro-polystyrene] ([(PEO-b-spiro-PS)]) copolymer with a topologically novel architecture was synthesized using thiol-ene step-growth polymerization reaction. Spiro-PS with dimercapto groups as the hard segment was synthesized in three main steps: (a) preparation of tetra-arm PS by atom transfer radical polymerization and the conversion of the chain-end group to azide functionality, (b) alkyne-azide click coupling reaction to synthesize a tricyclic PS, and (c) tactical ring opening of the tricyclic PS through disulfide/thiol redox reaction. The PEO soft segment was obtained as chain-ends modified with norbornene groups. Finally, the hydrothiolation of the highly reactive norbornene chain-ends of polyethylene glycol with the dimercapto groups of spiro-PS produced the multiblock ([(PEO-b-spiro-PS)]) copolymer in quantitative yield. The multiblock copolymer was characterized using size-exclusion chromatography, proton nuclear magnetic resonance spectroscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 132–138     

Synthesis of N,N-Bis(4-pyridinyl)piperazine (Bis-DMAP) as Novel Supernucleophilic Reagent

In the late 1960's,4-(N,N-dimethylamino)pyridine (1,DMAP) and 4-pyrrolidinopyridine (2, PPY) as high efficient supernucleophilic catlyst the benzoylation of m-chloroaniline were found independently by two research groups.^[1,2]     

Polypyrrole/Fe3O4/CNT as a recyclable and highly efficient catalyst for one‐pot three‐component synthesis of pyran derivatives

Polypyrrole (PPY)/Fe₃O₄/CNT has been synthesized and characterized by FT‐IR, TEM and SEM techniques and its catalytic activity has been evaluated in the synthesis of several series of pyran derivatives. Tetrahydrobenzo[b]pyranes, 4H‐pyran‐3‐carboxylates, 4H,5H‐pyrano[3,2‐c]chromenes and dihydropyrano[2,3‐c]pyrazoles have been successfully prepared from one‐pot three‐component condensation of aldehyde, malononitrile and active methylene‐containing compounds (dimedone /ethyl acetoacetate/4‐hydroxycoumarin/3‐methyl‐2‐pyrazoline‐5‐one) using PPY/Fe₃O₄/CNT as a new and reusable heterogeneous catalyst. The present method offer several advantages such as; high yields of products, short reaction times, easy work‐up procedure and easy separation of the catalyst from the reaction mixture due to its magnetic character. Furthermore, chemoselective synthesis of bis‐benzo[b]pyran from terephthalaldehyde can be achieved by this method.     

Syntheses and X-Ray Structures for Model Compounds of a Pyrimidinediyl-Based Rigid-Rod Aromatic Polyamide

A variety of model compounds for the pyrimidinediyl-based rigid-rod polyamide poly[imino-(pyrimidine-2,5-diyl)-imino-tetraphthaloyl] (PPYMT) was prepared, in order to compare their conformations to several model compounds of the related, fully aromatic polymer poly(p-phenyleneterephthalamide) (PPTA). In particular, the structures of N-(2-pyrimidyl)benzamide (PYMB) and its complexed form bis[(N-pyrimidin-2-yl)benzamide]nickel(II) dichloride (NiPYMB) were determined by X-ray diffraction. The molecular packing in these crystals provides us with a model for the possible ‘cross-linking’ of PPYMT fibers. The structures of the trimer model compounds N,N′ -bis(2-pyrimidyl)terephthalamide (PYTA) and N,N′ -bis(benzoyl)-2,5-diaminopyrimidine (BDAP) yield information about the conformation of PPYMT chains and are compared to analogous model compounds of PPTA.     

旋光聚[乙烯-alt-R-N-(1-苯乙基)马来酰胺酸]的合成及静电自组装

以聚(乙烯-alt-马来酸酐)为原料,通过与R-(+)-α-苯乙胺的酰胺化反应,合成了一种新型的旋光聚电解质聚[乙烯-alt-R-N-(1-苯乙基)马来酰胺酸],利用红外吸收光谱、紫外吸收光谱、核磁共振氢谱和旋光度数据对其结构进行表征.聚[乙烯-alt-R-N-(1-苯乙基)马来酰胺酸]与聚二甲基二烯丙基氯化铵(PDDA)逐层静电自组装过程的紫外跟踪测试结果表明,带相反电荷的聚电解质间能够形成稳定增长的自组装膜,多层膜组装量随双层数指数增大.     

壳聚糖硫酸酯稀溶液的粘度特性

通过毛细管粘度法考察了壳聚糖硫酸酯(Sulfated Chitosan,SCM)稀溶液的粘度特性。在非电解质溶液中,SCM比浓粘度随浓度的变化符合Fouss-Strauss经验关系式:ηsp/C=316.45×(1+79.88C1/2)-1。通过外加强电解质,SCM表现出正常的粘度行为,并且[η]随着外加强电解质离子强度的增加而减小。     

DC electrical conduction and morphological behavior of counter anion‐governed genesis of electrochemically synthesized polypyrrole films

Highly conducting polypyrrole (PPY) films, doped with various anions [pTS^?, ClO₄^?, and NO₃^? and mixed electrolyte system (pTS^? + ClO₄^?)], have been electrochemically synthesized in aqueous solution at ～275 K in an inert atmosphere. PPY exhibits metallic order dc conductivity at room temperature and shows variation of conductivity with respect to time of polymerization. Effect of dopant anion on growth mechanism of PPY is evident from its surface morphology. X‐ray photoelectron spectroscopy (XPS), used to examine the surface composition and doping level of various PPY films, confirms the anionic doping into the polymer backbone. Both XPS and ultraviolet–visible spectroscopy give evidence of formation of polarons and bipolarons. The temperature (4.2–320 K)‐dependent dc conductivity data of these PPY films have been explained by Mott's 3D variable‐range hopping conduction model. Mott's parameters have been estimated, and structural disorder with doping is correlated for all the samples. Mott's criterion for distant hopping sites prevails in case of moderately doped samples (PPY3, PPY4, and PPY5), whereas the hopping to nearest neighbor sites is found more suitable in case of highly doped samples (PPY1 and PPY2). The origin of these changes is due to the modification in the molecular structure of PPY, which is governed by different growth mechanisms for organic (pTS^?) and inorganic (ClO₄^? and NO₃^?) counter anions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Conductive polymer as a controlled microenvironment for the potentiometric high-throughput evaluation of ionic liquid cell toxicity

This paper presents both biological and potentiometric evaluations of the cell toxicity of a widely used ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]BF(4)), to Chinese hamster lung fibroblast cells (V79 cell line). The innovative potentiometric study takes advantage of the unique properties of conductive polymer polypyrrole (PPY) for the potentiometric evaluation of cell toxicity of [bmim]BF(4) to the V79 cells in a real-time, noninvasive and high-throughput manner. The conductive polymer PPY provides a controlled microenvironment that allows the quantitative release of the anions of the ionic liquids into the cells being monitored in real time and noninvasively. Parallel biological assay results showed that V79 cells exposed to [bmim]BF(4) usually grew in clusters, and that many small vacuoles could be seen in the cytoplasm. At the 24th hour after the V79 cells had been exposed to the ionic liquid (IL), the half inhibition concentration (EC(50)) of [bmim]BF(4) was around 5 mM. From a cell cycle study performed using a FACScan flow cytometer, it was found that the V79 cells could be partially locked to the G(1) phase by [bmim]BF(4), which extended the doubling time for cell growth. Comparing with the EC(50) values of cadmium chloride and mercury chloride, [bmim]BF(4) is not very toxic, but it may have a long-term toxic effect on mammalian cells. Compared to traditional biological in vitro assays, the use of a conductive polymer substrate in combination with a potentiometric sensor array is much more sensitive, faster, and enables a simpler evaluation of chemical cell toxicity. Additionally, it simplifies the study of the reversibility of cell toxicity, i.e., cell recovery, because there is no need to refresh the culture medium since a finite amount of chemicals can be doped and released. We found that the cytotoxicity of [bmim]BF(4) at a concentration of less than 6 mM was reversible for the V79 cell line, because cell morphology and proliferation rate returned to normal after the removal of the IL from the culture medium. This finding suggests that the IL [bmim]BF(4) could be used as a tool to control mammalian cell proliferation rate.     

Novel double hydrophilic block copolymers based on poly(p‐hydroxystyrene) derivatives and poly(ethylene oxide)

The synthesis of three series of double hydrophilic block copolymers (DHBCs), consisting of poly(ethylene oxide) as the neutral water soluble block and a second polyelectrolyte block of variable chemistry, is described. The synthetic scheme involves the anionic polymerization of poly(p‐tert‐butoxystyrene‐b‐ethylene oxide) (PtBOS‐PEO) amphiphilic block copolymer precursors followed by the acidic hydrolysis of the hydrophobic poly(p‐tert‐butoxystyrene) (PtBOS) block to an annealed anionic polyelectrolyte poly(p‐hydroxystyrene) (PHOS) block. The PHOS block was subsequently transformed into a high charge density annealed cationic polyelectrolyte namely poly[3,5‐bis(dimethylaminomethylene) hydroxystyrene] (NPHOS), via aminomethylation. Finally, the NPHOS block was transformed into a quenched polyelectrolyte, namely quaternized poly[3,5‐bis(dimethylaminomethylene) hydroxystyrene] (QNPHOS) block by reaction with CH₃I. The solution properties of the different series of the above block polyelectrolyte copolymers have been investigated using static, dynamic and electrophoretic light scattering, turbidimetry, and fluorescence spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5790–5799, 2007     

Synthesis and properties of a new family of phosphorus- and nitrogen-containing ionenes

Polyquaternization reactions of bis[2-(4-pyridyl)ethyl]phenylethylphosphine oxide and tris[2-(4-pyridyl)ethyl]phosphine oxide with 1,4-dibromobutane were implemented for the first time to give linear (water-soluble) and cross-linked (limitedly water swelling), respectively, representatives of new phosphorus- and nitrogen-containing ionenes. The synthesized linear ionenes react with heparin and polyacrylic acid yielding water-insoluble polyelectrolyte complexes.     

Solid-phase microextraction based on polypyrrole films with different counter ions

Solid-phase microextraction (SPME) fiber coatings based on polypyrrole (PPY) films were prepared by electrochemical deposition of PPY films on platinum wires. To evaluate the effects of counter ions in PPY films on their performance in SPME, PPY films with different counter ions were prepared using different electrolytes during the polymerization processes. The results showed that these PPY films had different extraction properties to the compounds studied due to the different functional groups introduced into the films by the counter ions. Unlike the PPY films formed with small counter ions (such as perchlorate ion) that had anion exchange property, the PPY films having large counter ions such as poly(styrenesulfonate) (PSS) ion showed cation exchange property. Compared with the PPY films having small inorganic counter ions, the PPY films having large organic counter ions, such as dodecylsulphate (DS) ion, showed better extraction efficiency towards nonpolar compounds due to the increased hydrophobic interactions between the compounds and the films. In addition, PPY films formed with large aromatic counter ions had better mechanical stability compared with PPY films with small inorganic counter ions. These films could be applied for SPME of a range of analytes.     

Ionic poly(p‐phenylene terephthalamide)s: Preparation and characterization

The preparation and characterization of two types of ionic poly(p‐phenylene terephthalamide) (PPTA) is described. A sufficient number of ionic groups were added to render modified PPTA soluble in dimethylsulfoxide (DMSO). In one type, a hydrogen atom of the amide group was replaced by an ionic propanesulfonate group. In the other type, one of the hydrogen atoms on the phenylene ring was replaced by an ionic sulfonate group. The ionic PPTAs in DMSO showed an upturn in viscosity at very low concentrations that was characteristic of the polyelectrolyte behavior. Fourier transform infrared spectra of these samples were also studied. When the ionic group was attached at the end of the short propane side chain, the intensity of both the free and hydrogen‐bonded N? H stretching mode was reduced compared with that of PPTA. Depending on the location of the ionic group, there were some changes in the intensity and wave number of the asymmetric and symmetric vibrations of the ionic SO group and the stretching mode of the carbonyl group. In both ionic PPTAs, there was an upward shift in the frequency of the symmetric vibrations of the sulfonate ion when the counterion, having been monovalent, became divalent. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2653–2663, 2001     

环氧氯丙烷修饰的对位和间位芳纶涂覆剂研究

制备了具有环氧丙基侧链的对位芳纶(PPTA-ECH)和间位芳纶(PMIA-ECH),并将其用做对位芳纶(PPTA)织物/环氧树脂复合材料中PPTA织物的涂覆剂。采用场发射扫描电子显微镜(FE-SEM)及XPS等方法对PPTA织物表面的PPTA-ECH涂层结构进行了表征。考察了PPTA-ECH和PMIA-ECH涂覆的PPTA织物/环氧树脂复合材料的层间剪切强度和面内剪切强度,并与未经涂覆的PPTA织物复合材料的性能作比较。结果表明,PPTA-ECH和PMIA-ECH可显著改善PPTA织物和环氧树脂之间的界面性能。涂覆了PPTA-ECH及PMIA-ECH的PPTA织物/环氧树脂复合材料的层间剪切强度(ILSS)比未经涂覆的复合材料分别提高了26.20%和14.76%,面内剪切强度(ISS)分别提高了26.98%和11.86%。由于PPTA-ECH对PPTA纤维具有更强的亲和能力,因此PPTA-ECH在层间剪切强度和面内剪切强度方面的增强效果均优于PMIA-ECH。对PPTA-ECH在PPTA纤维表面铺展与吸附及对复合材料的增强机理也进行了初步探讨。作为新型涂覆剂,PPTA-ECH在对位芳纶复合材料的开发应用方面具有潜在的应用前景。     

Dual-beam polarization interferometry resolves mechanistic aspects of polyelectrolyte adsorption

The electrostatically driven binding dynamics of a polyelectrolyte multilayer (PEMU) film was investigated in real-time using dual-beam polarization interferometry (DPI) and independently supported by quartz crystal microbalance with dissipation monitoring (QCM-D) studies. Multilayer assemblies of the polyanions poly[1-[4[(3-carboxy-4-hydroxyphenylazo)benzenesulfonamido]-1,2-ethanediyl sodium salt] (PAZO) and poly(styrene sulfonate) (PSS) were respectively constructed with the polycation poly(ethylenimine) (PEI) on anionic functionalized substrates using the layer-by-layer electrostatic self-assembly method. DPI measurements indicate that polyelectrolyte adsorption occurs in three distinct stages. In the first stage, for approximately 5 s, coil-like segments of polyanion partially tether to the surface of the oppositely charged PEI. In the second stage, these coils unfurl over a period of approximately 10 s to cover the surface resulting in an increase in average density of the film. During the final adsorption step, the surface-bound polyelectrolyte diffuses into the multilayer assembly, exposing the surface to further deposition. This last step occurs over a much longer time period and results in a highly interpenetrated film containing a charge-overcompensated region at the film surface.     

现场拉曼光谱研究聚吡咯的去质子化和氧化降解

利用电化学现场拉曼光谱结合循环伏安法,研究了中性和碱性溶液中聚吡咯（ＰＰＹ）膜的行为及其结构．结果表明,氧化态ＰＰＹ中吡咯环Ｎ原子上的Ｈ失去发生去质子化,形成一种醌式结构．由于该醌式结构的出现使ＰＰＹ的Ｃ＝Ｃ伸缩振动峰发生分裂,且因该醌式结构不能被进一步氧化,以致ｐＨ值增大,去质子化程度提高,ＰＰＹ变得较难被氧化,而使其可逆性也受到一定程度的破坏,在ｐＨ＝１３的强碱性溶液中,ＰＰＹ膜在正于ＯＶ的电位区间内发生降解,该降解过程可能涉及到ＰＰＹ的吡咯环单元结构的破坏．     

As-5、[As5M]-、[As5MAs5]2- (M=Ti,Zr, Hf)的结构和芳香性

用密度泛函理论(DFT)研究了As-5、[As5M]-和[As5MAs5]2- (M=Ti, Zr, Hf)的结构、频率、能量以及芳香性, 详细讨论了体系中不同类型的键和电子如化学键、孤对电子、核电子等对总的核独立化学位移(NICS)的影响. 结果表明, As-5、[As5M]-和[As5MAs5]2-的基态结构分别具有D5h、C5v和D5h对称性, 而且都具有芳香性. As-5 (D5h)的芳香性主要来源于As—As π键和As—As σ键的作用. [As5M]-(C5v)中各种As—M键的NICS分割值占主要优势, 其次是As—As之间形成的σ键. [As5TiAs5]2-(D5h)中, As—As π键的作用占主要优势. [As5ZrAs5]2-(D5h)中, As—As π键对体系总的NICS贡献相对减小, 而As—Zr键的作用增强. [As5HfAs5]2-(D5h)的芳香性主要来自As—Hf键的作用.